INVISIBLE CONTROLMARMITEK
www.marmitek.com
www.marmitek.com
HOW DOES IT WORK?
With the Invisible Control you can control
your A/V equipment if it is placed in a
closed cupboard or if your equipment is
out of view. Connect the cable with IR
LEDs to the side of the Invisible Control.
Connect the power adapter included or
insert a 9V battery (not included) in the
battery compartment. Stick the IR LED’s on
the IR eyelets of your A/V equipment. Place
the Invisible Control on top of, below or
next to the A/V unit, within sight of your
remote control.
INVISIBLE CONTROL
• Operate the audio/video equipment in a closed multi media
cabinet with your own remote control.
• It works with all A/V equipment (DVD/SAT/VIDEO/AUDIO etc.)
with an infrared eye (except B&O).
•
Connect and operate multiple appliances (standard 2, maximum 4),
with the cabinet doors shut or appliances out of sight.
• Works on a 9V battery (not included) or from a mains supply
(adapter included).
• Place the Invisible Control on, under or next to the multi
media cabinet, in view of the remote control.
TECHNICAL INFORMATION
• Power: 12V/200 mA adapter (included) or a 9V battery (battery not included)
• Connections: 2 connections for the IR Eye Cable (1 IR Eye Cable included)
• IR Eye cable: 2 IR LEDs (blinking), cable length: 3 m with 3,5 mm jackplug
• Dimensions: 90x75x30 mm
IR EYE (UNIVERSAL IR EXTENSION CABLE)
The IR Eye is a universal IR extension cable with 2 IR LEDs. With this you can control up to 2 appliances with
Invisible Control. Also suitable for use with audio/video transmitters and IR extenders (Invisible Control,
Powermid) by e.g. Marmitek, Speakercraft.
AVAILABLE PRODUCTS
• Invisible Control (E) Art. No. 09681
• Invisible Control (U) Art. No. 09695
• IR Eye Art. No. 09682
(E = EU plugtype, U = English plugtype)
COPYRIGHT © 2006 MARMITEK - 22330 / 20060323
Invisible Control