STACKED ELECTRIC
E
MODEL: □ 4292 (Stacked Oven)
SIZE: 30" wide by 72" high by 29" front-to-back
(762mm wide by 1829mm high by 737mm front-to-back)
DESCRIPTION:
Will be two Market Forge Model 4292 Electric Convection Ovens. Exterior will be grey, 20 gauge steel with enclosed back and a stainless steel front with single door
which will open a full 180°. Door frame will enclose doublepane thermal type glass window. Usable interior oven
dimensions are 20" high by 15
508mm high by 394mm wide by 527mm deep). Oven
interior and heating element baffle will be porcelain enameled steel. Oven shelves, shelf supports and heating element baffle will be removable for cleaning. Shelf supports, will provide nine shelf positions centered 2" (51mm)
apart. Stop on oven shelves will prevent shelves from
tipping within the shelf supports or from being acciden-
(
tally removed from oven. Five shelves per oven will be
furnished as standard. Oven door will be available either
right
or left handed.
CONVECTION OVEN
1
/2" wide by 203/4" deep
JOB NAME
ITEM NO.
NO. REQUIRED
.ON CEPS
11/80
C5432-S
Controls will consist of main power switch, fan speed
switch, cool down switch, solid state temperature controller with a temperature range from 100°-450°F plus 6-7°F
chanical 60-minute timer with an audible alarm which
sounds at the conclusion of the cooking cycle. All controls will be located on a panel on the right front of the
oven. Unit will be equipped with a high limit control.
Convector fan will turn on automatically when power is
on and door is closed, and turn off automatically when
(
door is opened. For rapid cooling purposes, it will be
possible to operate blower with door open with cool down
switch in manual position. Convector fan will be two
speed, 1700 RPM (high) and 1100 RPM (low) (motor
rated
Oven will be serviceable from the front and right side.
Back of oven will be completely enclosed and suitable
for installation tight against a noncombustible wall.
38-232
1
o
C plus 3-4oC), door interlock switch, and a me-
/4HP).
The manufacturer reserves the right to modify materials and specifications without notice.
OPERATION WILL BE BY:
Oven will be equipped for operation on:
□ 208VAC, 60Hz, 5KW □ 1 Phase □ 3 Phase
□ 220VAC, 60Hz, 5.6KW □ 1 Phase □ 3 Phase
□ 220VAC, 60Hz, 5.6KW □ 1 Phase
□ 230VAC, 60Hz, 5KW □ 1 Phase □ 3 Phase
□ 240VAC, 60Hz, 5.6KW □ 1 Phase □ 3 Phase
□ 240VAC, 60Hz, 5.6KW □ 1 Phase
□ 480VAC, 60Hz, 5.6KW □ 1 Phase □ 3 Phase
OPTIONAL AT EXTRA COST:
□ Stainless Steel Exterior
□ Stainless Steel Interior
□ Extra Shelves_________quantity.
□ 6’ (1829mm) cord and plug on 208, and 240 1 Phase.
□ 7.5KW Elements
□ Radiant Heat Switch
□ (6) program microprocessor with cook and hold.
St nevO noitcevnoC - dekca
TNEMPIUQE ECIVRES DOOF
Printed in U.S.A.
An Employee Owned Company
35 Garvey Street Everett MA 02149
Tel: (617) 387-4100 Fax: 1-800-227-2659 (Ex. MA) (617) 387-4456 (MA and Overseas)
E-Mail: CUSTSERV@mfii.com Website: www.mfii.com
E
STACKED ELECTRIC
CONVECTION OVEN
DETAILS & DIMENSIONS
SERVICE CONNECTIONS
EP
25"
635mm
4292
EP
3"
76mm
25"
635mm
4292
C5432-S
11/80St nevO noitcevnoC - dekca
.ON CEPS
Electrically Operated
EP Power Supply - Connection or equivalent. Use wire
suitable for at least 90
o
C. Nominal amp per line.
zH06 nevO WK6.5
Volts AMPS
208V, 1pH. 5KW
208V, 3pH. 5KW
220V, 1pH. 5.6KW
220V, 3pH. 5.6KW
230V, 1pH. 5KW
230V, 3pH. 5KW
240V, 1pH. 5.6KW
240V, 3pH. 5.6KW
480V, 1pH. 5.6KW
480V, 3pH. 5.6KW
24
21
26
22
20
20
24
21
12
12
OPTIONAL AT EXTRA COST:
208V, 1pH. 7.5KW
208V, 3pH. 7.5KW
240V, 1pH. 8.4KW
240V, 3pH. 8.4KW
480V, 1pH. 8.4KW
480V, 3pH. 8.4KW
36 Amps
23 Amps
31 Amps
20 Amps
18 Amps
10 Amps
zH05 nevO WK6.5
EP
27 11/16"
703mm
Vent
NOTES:
220V, 3pH. 5.6KW
240V, 3pH. 5.6KW
a.) Details of other systems available upon request.
SPMAstloV
25
23
b.) Oven can be converted from single to three (3) phase
in the field.
17 1/2"
445mm
1 5/8" DIA. Hole for
conduit fitting to
connect EP.
1"
25mm
5 1/2"
140mm
10 3/8"
263mm
fitting to connection EP.
3 1/4"
83mm
EP
TNEMPIUQE ECIVRES DOOF
17 1/2"
445mm
It is our policy to build equipment which is design certified by U.L., A.S.M.E., N.S.F. and C.S.A. However, a continuing program of product improvement makes
it necessary to submit new models to the agencies as they are developed and consequently not all models bear the appropriate agency labels at all times.
Printed in U.S.A.
3"
76mm
Vent
1 5/8" DIA. Hole for
conduit fitting to
connect EP.
3"
76mm
25 1/2"
648mm
19"
483mm
30 1/8"
765mm
An Employee Owned Company
35 Garvey Street Everett MA 02149
Tel: (617) 387-4100 Fax: 1-800-227-2659 (Ex. MA) (617) 387-4456 (MA and Overseas)
E-Mail: CUSTSERV@mfii.com Website: www.mfii.com
conduit 1 5/8" DIA. Hole for
EP