Market Forge 3500M24G100A User Manual

3500 GAS CONVECTION

G

MODELS: □ 3500M24G100A □ 3500M24G200A

SIZE: 24” Wide x 33” Front-to-Back

(

DESCRIPTION:

Will be a Market Forge Model ________ gas red convection

steam cooker. Will be integrally mounted on a cabinet base

containing gas red steam generator.

STEAM COOKER ON 24” BASE

610mm Wide x 838mm Front-to-Back)

JOB NAME: ___________________________
ITEM NO.: ____________________________
NO. REQUIRED: _______________________

The 3500 will be of double-wall construction with 1” (25mm)
thick insulation between cooking compartments and exterior
walls, and will have two 18 gauge stainless steel welded
cooking compartments with coved internal corners, and a 16

gauge stainless steel front panel.

Each cooking compartment on the 3500 has a positive slam
action, eld-reversible door constructed of Type 304 stain­less steel. Door latches are spring loaded. The inner door
gasket is a one-piece NSF-approved silicone rubber gasket.

The cooking compartment is equipped with a door interlock

(switch) that shuts off steam to the cooking compartment

when the door is opened. Factory installs units with the door
opening from the right, see diagram.

Each compartment will be equipped with a perforated steam
inlet bafe positioned for precise application of high velocity

steam across the surface of food. Controls for each com-

partment will include a 60-minute load compensating timer
with constant steam position, an indicator light, steam inlet
solenoid valve, pressure relief valve, vacuum breaker, an
automatic cold water steam condenser system, and a remov-

able drip trough.

Each compartment will be independently and automatically

controlled by setting the cooking time on the 60-minute timer.

At the end of cooking time, indicator light will turn off and a
continuous signal will sound. Signal is silenced by returning

the timer to the OFF position.

Stainless steel cabinet base will match other Market Forge

stainless steel equipment and enclose steam generator.

Base with stainless steel frame will be equipped with 6”
(152mm) stainless steel legs and adjustable bullet feet, rein­forced stainless steel counter-top, and stainless steel lift-off

front cover.

The CSD-1 compliant steam generator comes standard

with a Pilotless Ignition System and Nickel Plating. The
steam generator will be automatically lled with water and
brought to pressure when water and heat switches are

turned on and automatically drained under pressure when
water and heat switches are turned off. A cold water con­denser will automatically condense all exhausted steam into
water before it is released from the cooker and steam gen­erator drain. Unit also includes safety valve, low water cut­off, water strainer, cathodic protector, and also includes an
access for total concept delimer/descaler, and PM Plus (a

corrosion inhibitor).

COOKING CAPACITIES:

Each compartment will accommodate the following:

□ (6) 12” x 20” x 1 “ deep pans
□ (3) 12” x 20” x 21/2 “ deep pans
□ (2) 12” x 20’’ x 4” deep pans

OPERATION WILL BE BY:

Gas red, A.S.M.E. constructed and National Board Regis­tered, 15PSI (1 kg/cm2) steam generator rated at:

□ 100,000 BTU (Model 3500M24G100A)
□ 200,000 BTU (Model 3500M24G200A)

OPTIONAL AT EXTRA COST:

□ 12” x 20” x 1” Perforated Stainless Steel Pans.
□ 12” x 20” x 2 1/2” Perforated Stainless Steel Pans.
□ 12” x 20” x 2 1/2” Solid Stainless Steel Pans.
□ 12” x 20” x 4” Perforated Stainless Steel Pans.
□ 12” x 20” x 4” Solid Stainless Steel Pans.
□ Digital Countdown Timer.
□ Total Concept.
□ PM Plus.
□ Steam Take Off Kit.
□ Filter System.

SPEC SHEET: S-4843E

08/12

FOOD SERVICE EQUIPMENT

3500 Steam Cooker

The manufacturer reserves the right to modify materials and specications without notice.

PRINTED IN U. S. A. 35 Garvey Street • Everett • MA • 02149

Tel: [phone] • Toll Free: [phone] • Fax: [phone] • Outside MA Fax: [phone]

E-Mail: custserv@mi.com • Website: w w w . m f i i . c o m