Marantz VS3003 User guide

Contents Connections Operations Troubleshooting Appendix Specifications

.

3 In / 1 Out HDMI

Switcher

VS3003

Front panel Rear panel Side panel Remote

1

Owner’s Manual

Contents Connections Operations Troubleshooting Appendix Specifications

Confirming the accessories

Inserting the batteries
Operating range of the remote control unit

Part names and functions

Front panel
Rear panel
Side panel
Remote control unit

Connections

Connections

Basic connections
Connecting an external control device

Operations

Operations

Operating with the HDMI control (CEC) function
Operating with the remote control unit
Operating with the AVR control function

Troubleshooting

Troubleshooting

3

Appendix

5

Trademark information

6

7

Specifications

7

Specifications

8
9

10

11

11
14

15

15
16
17

20

23

24

Front panel Rear panel Side panel Remote

2

AC adapter

AC adapter plugs

(5 types)

Power supply cable

(USB type,

approx. 4’10”/1.5 m)

HDMI cable

(40 Gpbs,

approx. 4’10”/1.5 m)

Mounting screws

(4 pieces)

Battery

(CR2032)

Remote control unit

(RC046SR)

Cautions on Using BatteriesSafety InstructionsQuick Start Guide

Wall-mount bracket

Contents Connections Operations Troubleshooting Appendix Specifications

Thank you for purchasing this Marantz product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.

Confirming the accessories

Check that the following parts are supplied with the product.

.

Front panel Rear panel Side panel Remote

3

Contents Connections Operations Troubleshooting Appendix Specifications

There are 5 types of supplied AC adapter plugs. Use the plug appropriate to the

0

region you live in.

.

Front panel Rear panel Side panel Remote

4

Coin etc.

Battery cover

Battery (CR2032)

Contents Connections Operations Troubleshooting Appendix Specifications

Inserting the batteries

Insert a coin or other item into the slot on the battery

1

cover, turn counterclockwise, and remove the battery
cover.

.

Confirm that the direction of the battery is correct and

2

then insert the battery.

.

While pressing down on the battery cover from above,

3

turn the coin or other item clockwise.

.

NOTE

If the battery should have a leakage, immediately replace and dispose of the

0

battery. In this case, there is a risk of burn when the liquid comes in contact with
skins or clothes, so a great care should be taken. If the liquid accidentally comes in
contact, wash with tap water and consult a doctor.

Remove the batteries from the remote control unit if it will not be in use for long

0

periods.

Front panel Rear panel Side panel Remote

5

30° 30°

Approx. 23 ft/7 m

Contents

Connections Operations Troubleshooting Appendix Specifications

Operating range of the remote control
unit

Point the remote control unit at the remote sensor when operating it.

.

Front panel Rear panel Side panel Remote

6

qw e

Contents Connections Operations Troubleshooting Appendix Specifications

Part names and functions

Front panel

.

Remote control sensor

A

This receives signals from the remote control unit. (v p. 6)
Point the remote control unit at this sensor when operating it.

HDMI input indicators (HDMI INPUT 1 - 3)

B

The number of the HDMI input that is currently selected is lit.
This is lit as follows according to the power status of this unit:

Power on: Blue

0

Standby: Red

0

The power of this unit is linked to the power status of the HDMI devices

0

connected to HDMI connectors 1 to 3 and automatically turns on.

When the HDMI CONTROL switch is OFF:

0

Links to the power of the device that is connected to the currently selected
HDMI input.

When the HDMI CONTROL switch is ON:

0

Links to the power of the devices that are connected to HDMI connectors 1
to 3.

Input switching button (INPUT)

C

This selects the HDMI input.
When the button is pressed, the HDMI input switches.

Front panel Rear panel Side panel Remote

7

HDMI IN HDMI OUT

5V/1A

DC IN

IN

IR

REMOTE CONTROL

(FLASHER)

wqer

Contents Connections Operations Troubleshooting Appendix Specifications

Rear panel

.

Remote control jack (REMOTE CONTROL (FLASHER) IN)

A

B

This jack can be used to connect and control this unit externally with a
separately sold IR repeater when this unit is positioned where the
remote control signal cannot reach.

Refer to “Connecting an external control device” (v p. 14) for how to
connect.

C

D

NOTE

This will disable remote sensor reception of this unit.

0

Front panel Rear panel Side panel Remote

8

HDMI input connectors (HDMI IN 1 - 3)

These connect game consoles, media players, or other HDMI source
devices.

HDMI output connector (HDMI OUT)

This outputs the selected HDMI input signal.

DC input connector (DC IN)

This connects the supplied AC adapter.
Using an AC adapter other than the one supplied may cause fault.

qw

Contents Connections Operations Troubleshooting Appendix Specifications

Side panel

.

AVR control switch (AVR CONTROL)

A

You can use the remote control unit for your Marantz AV receiver/AV
amplifier to switch the HDMI input of this unit.

If using the HDMI control (CEC) function or the supplied remote control
unit to change the HDMI input of this unit, keep this switch turned OFF.

If using the AVR control function, it is necessary to change the settings
and connections from the AV receiver/AV amplifier in advance. Refer to
“Operating with the AVR control function” (v p. 17) for more
information.

HDMI control switch (HDMI CONTROL)

B

If using the HDMI control (CEC) function, turn this ON. This links to
devices compatible with HDMI control (CEC) and changes the HDMI
input of this unit.

Refer to “Operating with the HDMI control (CEC) function” (v p. 15)
for how to operate using the HDMI control (CEC) function.

Front panel Rear panel Side panel Remote

9

q

Contents Connections Operations Troubleshooting Appendix Specifications

Remote control unit

HDMI input source select buttons (1 - 3)

A

These select the HDMI input.

Front panel Rear panel Side panel Remote

10

8K

HDMI IN

HDMI IN HDMI OUT

5V/1A

DC IN

IN

IR

REMOTE CONTROL

(FLASHER)

Game console

Game console

This unit AC adapter

Power supply cable

(supplied)

AV receiver /

AV amplifier

Media player

HDMI cable

(sold separately)

HDMI cable

(sold separately)

HDMI cable (supplied)

HDMI cable

(sold separately)

1

1

12

3

Contents

Connections

Basic connections

Connections Operations Troubleshooting Appendix Specifications

.

Front panel Rear panel Side panel Remote

11

Contents Connections Operations Troubleshooting Appendix Specifications

Use separately sold HDMI cables to connect game

1

consoles or other source devices to HDMI input
connectors 1 to 3 of this unit.

Use the supplied HDMI cable to connect an 8K-

2

compatible HDMI input connector of an AV receiver/AV
amplifier to the HDMI output connector of this unit.

Connect the supplied AC adapter.

3

When connecting this unit to devices that are compatible with the 8K and 4K

0

120Hz video, use certified Ultra High Speed HDMI cables. If you use a different
HDMI cable, the video may not be displayed or other problems may occur.

Front panel Rear panel Side panel Remote

12

Contents

o

When mounting this unit to a wall

You can use the supplied wall-mount bracket to mount this unit to a
wall.

To ensure your safety, ask a professional to mount it to the wall.

When you mount this unit to a wall, use a commercially available IR repeater

0

(separately sold) to receive signals from the remote control. Refer to “Connecting
an external control device” (v p. 14) for more information.

NOTE

When you mount the wall-mount bracket to this unit, be sure to use the supplied

0

self- tapping screws. Using screws other than those supplied may cause fault.
To prevent people from accidentally pulling or tripping over the connector cable

0

and causing this unit to fall over, be sure to fix the cable to a wall or other location.
After mounting, be sure to confirm that it is safe. Also, perform regular inspections
to confirm that there is no possibility of falling.

Marantz does not bear responsibility for any injuries or accidents due to

0

inappropriate mounting locations or mounting methods.

Connections Operations Troubleshooting Appendix Specifications

Mount the wall-mount bracket to this unit using the

1

supplied screws.

Attach the wall-mount bracket with the side with the u mark facing
outward.

.

Fix this unit to the wall using separately sold wall-

2

mount screws.

Front panel Rear panel Side panel Remote

13

.

This unit

GND

Signal

Monaural mini-plug cable
(Sold separately)

Universal remote

IR repeater IR receiver

or

HDMI IN HDMI OUT

5V/1A

DC IN

IN

IR

REMOTE CONTROL

(FLASHER)

Contents

Connections Operations Troubleshooting Appendix Specifications

Connecting an external control device

Even if you put this unit in a cabinet or another location where the remote control signal cannot reach, if you connect a commercially available IR repeater
(separately sold), you can operate this unit using the remote control unit.

This will disable remote sensor reception of this unit.

.

Front panel Rear panel Side panel Remote

14

Contents

Connections Operations Troubleshooting Appendix Specifications

Operations

Operate using one of the following methods.

Operating with the HDMI control (CEC)
function

Turn the HDMI CONTROL switch on the side panel of

1

this unit ON.

Turn on the power of the source device you want to

5

use, and then confirm that the power of this unit, the
AV receiver/AV amplifier, and the TV turn on, and that
the HDMI input switches correctly.

The indicator for the selected HDMI input is lit in blue.

Turn on the power of all source devices (such as game

2

consoles) connected to this unit with HDMI cables, the
AV receiver/AV amplifier, and the TV.

Enable the HDMI control (CEC) function for all devices.

3

4

For source devices that have settings to link to other devices and

0

turn them on when the source device power is turned on, enable
those settings. Refer to the manual for each device for more
information about the settings.

Turn the power of the TV to standby, and then confirm
that the power of this unit, the source devices, and the
AV receiver/AV amplifier also turn to standby.

If the power is turned off for all source devices connected to this unit,
the HDMI input indicators of this unit are lit in red.

Front panel Rear panel Side panel Remote

If the source device has an auto standby function, it is recommended to enable the

0

auto standby function so that the power turns off automatically when not in use.
Depending on the specifications of the source device or TV that is connected,

0

some functions may not be available.

15

Contents Connections Operations Troubleshooting Appendix Specifications

Operating with the remote control unit

Turn on the power of the source device you want to

1

use.

On the supplied remote control unit, press the HDMI

2

input source select button (1 to 3) to perform playback.

The indicator for the selected HDMI input is lit in blue.

You can also select an HDMI input by pressing the INPUT button

0

on the main unit.

Switch the input source for the AV receiver/AV

3

amplifier to the HDMI input connected to this unit.

Switch the input for the TV to the HDMI input connected

4

to the AV receiver/AV amplifier.

Front panel Rear panel Side panel Remote

16

This unit

AV receiver /

AV amplifier

Remote control sensor

Contents

Connections Operations Troubleshooting Appendix Specifications

Operating with the AVR control
function

If you have an 8K-compatible Marantz AV receiver/AV amplifier, you can
use the remote control unit for the AV receiver/AV amplifier to switch the
HDMI input for this unit.

The 8K, GAME, and MEDIA PLAYER buttons on the remote control unit
for the AV receiver/AV amplifier can be used to switch the HDMI input for
this unit as follows.

Buttons on remote control unit for AV

NOTE

This function cannot be used on the AV8805 or AV8805A. It is recommended to

0

use the learning function on the remote control unit for the AV receiver/AV
amplifier.

receiver/AV amplifier

8K HDMI 1

GAME HDMI 2

MEDIA PLAYER HDMI 3

Input selection on this

unit

If you want to use the AVR control function, change the settings and
connections for the AV receiver/AV amplifier according to the following
procedure.

o

Positioning

Turn the AVR CONTROL switch on the side panel of

1

this unit ON.

Position this unit close to your AV receiver/AV amplifier

2

so that the remote control sensor on this unit can
receive remote control signals from the AV receiver/AV
amplifier.

.

Front panel Rear panel Side panel Remote

17

8K

HDMI IN

HDMI IN HDMI OUT

5V/1A

DC IN

IN

IR

REMOTE CONTROL

(FLASHER)

Game console

Game console

This unit

AV receiver /

AV amplifier

Media player

Contents

o

Connecting

Connect the source devices connected to the HDMI

1

input connectors for 8K, GAME, and MEDIA PLAYER on

Connections Operations Troubleshooting Appendix Specifications

the back of the AV receiver/AV amplifier to HDMI input
connectors 1 to 3 on this unit.

Connect the HDMI output connector on this unit to an

2

8K-compatible HDMI input connector on the AV
receiver/AV amplifier.

The number of the 8K-compatible HDMI input connector varies depending on the

0

specifications of AV receiver/AV amplifier. Connect after referring to the manual for
AV receiver/AV amplifier.

When connecting this unit to devices that are compatible with the 8K and 4K

0

120Hz video, use certified Ultra High Speed HDMI cables. If you use a different
HDMI cable, the video may not be displayed or other problems may occur.

.

Front panel Rear panel Side panel Remote

18

DIGITAL ANALOGHDMI VIDEO INPUT MODE

Inputs/Input Assign

Set Defaults

CBL/SAT

DVD
Blu-ray
Media Player
Game
AUX
8K
TV Audio

1
2
3

6

(8K)

6

(8K)

-

6

(8K)

-

1
2

-

-

­3

-

-

VIDEO1
COMP1

-

­COMP2
VIDEO2

-

-

COAX

-

-

-

OPT2

-

-

OPT1

Changes HDMI input assignments

CD - 4 -

AUTO
AUTO

HDMI
HDMI

AUTO

ANALOG

HDMI
DIGITAL
ANALOG

-

This unit

AV receiver /

AV amplifier

Contents

Connections Operations Troubleshooting Appendix Specifications

o

Configuring the settings for an AV receiver/AV

o

amplifier

1

Open the “Inputs” - “Input Assign” settings screen

1

from the menu for the AV receiver/AV amplifier.

Configure the settings to assign 8K-compatible HDMI

2

connectors (6(8K) or 7(8K))z to the HDMI input
connectors of the 8K, Game, and Media Player input
sources.

The 8K-compatible HDMI connectors vary depending on the specifications

z

of your AV receiver/AV amplifier. Configure the settings according to the
specifications of AV receiver/AV amplifier.

.

Front panel Rear panel Side panel Remote

19

Operating

Press the 8K, GAME, or MEDIA PLAYER button on the
remote control unit for the AV receiver/AV amplifier.

The inputs for this unit and for the AV receiver/AV amplifier switch
simultaneously. The HDMI input for this unit that corresponds to the
signal received from the button is selected.

.

Contents

Connections Operations Troubleshooting Appendix Specifications

Troubleshooting

If a problem should arise, first check the following:

1. Are the connections correct?

2. Is the set being operated as described in the owner’s manual?

3. Are the other devices operating properly?

If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem.

0

Remove and re-insert the power cord of the unit.

If this unit does not operate properly, check the corresponding symptoms in this section.
If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power

immediately and contact the store where you purchased this unit.

Power does not turn on / Power is turned off

o

Confirm that the AC adapter is plugged into the outlet.

0

Check all connections to HDMI connectors.

0

Check whether the adapter plug for the AC adapter is attached correctly to the AC adapter.

0

Use the AC adapter supplied with this unit.

0

Confirm that the power is turned on for the source device connected to the selected HDMI input. The power for this unit is linked to the power of the

0

source device connected to the HDMI input connector, and automatically turns on or to standby.

Front panel Rear panel Side panel Remote

20

Contents

Power automatically turns off

o

This unit is linked to the power of the source device connected to the HDMI input connector, and automatically turns to standby.

0

Operations cannot be performed through the remote control unit

o

The battery is used up. Replace it with a new battery (CR2032).

0

Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°.

0

Remove any obstacle between this unit and the remote control unit.

0

The orientation of the coin type lithium battery (CR2032) is incorrect. Confirm that the q mark on the battery is facing upward.

0

The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the

0

remote control sensor will not be exposed to strong light.
This will disable remote sensor reception of this unit.

0

No video is shown on the TV

o

Check the connections for all devices.

0

Insert connection cables all the way in.

0

Check whether you have mistaken the HDMI input connector for the HDMI output connector or vice versa.

0

Confirm that the power of the source device is turned on.

0

Confirm that the correct inputs are selected for this unit, the AV receiver/AV amplifier, and the TV.

0

Confirm that the resolutions of the source device and the TV are correct.

0

When enjoying content that is copyright-protected with HDCP 2.2 or HDCP 2.3, use a source device and TV that are compatible with HDCP 2.2 or

0

HDCP 2.3.
Use a certified Ultra High Speed HDMI cable to enjoy 8K or 4K 120Hz videos.

0

Connections Operations Troubleshooting Appendix Specifications

Front panel Rear panel Side panel Remote

21

Contents

Inputs of this unit cannot be switched with the HDMI control (CEC) function

o

Check whether the HDMI CONTROL switch on the side panel of this unit is turned ON.

0

Check whether the HDMI control function settings are enabled for all devices connected to this unit. In the settings for the connected source devices, if

0

there are settings to link to and turn on other devices when the power is turned on, enable those settings as well.
The specifications for HDMI control vary by device. If the source device has an auto standby function, it is recommended to enable the auto standby

0

function so that the power turns off automatically when not in use.
When you make connection related changes such as connecting an additional HDMI device, the link operation settings may be initialized. Turn off this

0

unit and devices connected via HDMI, and turn them on again.
Depending on the connected devices and settings, the HDMI control function may not work. If the problem is not fixed even after confirming the above,

0

use the remote control unit to change the inputs for this unit directly.

The inputs for this unit change when this unit receives the signals of the remote control supplied

o

Connections Operations Troubleshooting Appendix Specifications

with the AV receiver/AV amplifier

The AVR CONTROL switch on the side panel of this unit is turned ON. If you do not want to use it, turn the switch OFF.

0

Front panel Rear panel Side panel Remote

22

Contents Connections Operations Troubleshooting Appendix Specifications

Trademark information

.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.

HDR10+™ logo is a trademark of HDR10+ Technologies, LLC.

Front panel Rear panel Side panel Remote

23

Contents Connections Operations Troubleshooting Appendix Specifications

Specifications

Video

o

Resolution: 480i, 480p, 576i, 576p, 720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/100/120

Color: Deep Color, x.v. Color, Adobe RGB, Adobe YCC601, sYCC601, BT.2020

HDR: HDR10, HDR10+, Dynamic HDR, Hybrid Log-Gamma

HDMI features: HDMI control (CEC), 3D, ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate),

Maximum data rate: 40 Gbps

HDCP Compliance: HDCP 1.4/2.3

Audio

o

Audio Format: LPCM (2ch, 7.1ch) / Dolby Digital / DTS / Dolby Atmos / Dolby TrueHD /

4K 24/25/30/50/60/100AB/120AB, 8K 24AB/25AB/30AB/50AB/60

QMS (Quick Media Switching), QFT(Quick Frame Transport)

Dolby Digital Plus / DTS:X / DTS-HD Master Audio / DTS-HD High Resolution Audio /
DTS Express / DSD / MPEG-2 AAC / MPEG-4 AAC / MPEG-H
(Works with all audio formats supported by the connected AV receiver/AV amplifier)

AB

Front panel Rear panel Side panel Remote

24

Contents

AC adapter

o

Manufacturer: CUI INC

Address: 20050 SW 112th Ave. Tualatin, OR 97062

Model identifier: SMI5-5-V-I38-C9

Input voltage: AC 100 - 240 V

Input AC frequency: 50/60 Hz

Output voltage: 5.0 V

Output current: 1.0 A

Output power: 5 W

Average active efficiency: 75.5 %

Efficiency at low load (±10 %): 74.3 %

No-load power consumption: 0.075 W

General

o

Operating temperature: 41 °F - 95 °F (5 °C - 35 °C)

Power supply: AC 100 - 230 V, 50/60 Hz

Power consumption: 2.3 W

Power consumption in standby mode: 0.2 W

For purposes of improvement, specifications and design are subject to change without notice.

Connections Operations Troubleshooting Appendix Specifications

Front panel Rear panel Side panel Remote

25

5.5 (140)

4.1 (105)

0.7

(17.5)

0.7

(17.5)

0.6

(14)

0.6

(15)

2.5 (65)

3.7 (94)

0.1

(2)

0.1

(2)

3.9 (98)

3.7 (94)

0.1
(1.5)

1.2 (32.5)

1.3 (34)

Contents

Dimensions (Unit : in. (mm))

o

Connections Operations Troubleshooting Appendix Specifications

.

Front panel Rear panel Side panel Remote

26

5.5 (140)

0.6

(14.5)

0.6

(14.5)

6.7 (169)

3.2 (80)

6.1 (154)

4.1 (105)

0.7

(17.5)

0.7

(17.5)

0.6

(14)

0.6

(15)

2.5 (65)

3.7 (94)

0.1

(2)

0.1

(2)

3.9 (98)

3.7 (94)1.3 (34)

Contents Connections Operations Troubleshooting Appendix Specifications

n

When mounting a wall-mount bracket

.

Weight: 0.7 lb (300 g) (When not mounting a wall-mount bracket)

o

Front panel Rear panel Side panel Remote

27

.

28

©2021 Sound United. All Rights Reserved.

3520 10817 00AM