Marantz VQ-2400 Schematic

VQ2400 HD Compatible Video Up Converter with TBC

This groundbreaking product was designed to make every home theater a lot less complicated. To use, simply connect the Composite

Video, S-Video, and/or Component Video outputs from your existing receiver/preamp to the corresponding inputs on the VQ2400

and then connect one cable from the Component Video output on the VQ2400 to your display device. Power it with the included

12 volt power supply and the VQ2400 will seamlessly “upconvert” all the signals to component level, eliminating the need to run mul-

tiple cables from your equipment rack to the video display. From then on, you will never need to switch inputs on your display

device again. It’s that easy and it is compatible with virtually any Receiver/Pre Amp available, regardless of brand. The VQ2400 also

incorporates Time Based Correction for compatibility with fixed pixel devices such as plasma displays and DLP projectors.

*All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, Inc. or any of its subsidiaries will not assume any liability for errors within this document.