
MA417
User’s Manual
RRRaaaiiinnnbbbooowww EEEyyyeee Bluetooth Speaker

INSTRUKCJA OBSŁUGI
2
Opis funkcji:
Wbudowany Bluetooth 2.1 + bezprzewodowy moduł EDR
Dzwięk audio przez Bluetooth , perfekcyjna jakość dzwięku
oraz efekt basu.
Odległość odbioru do 10m.
Obsługuje urządzenia iPhone,iPad oraz inne z wbudowaną
funkcją Bluetooth.
Funkcja Bluetooth hand free, łatwe odbieranie rozmów
telefonicznych.
Kontrola funkcji muzycznych przez Bluetooth.
Wbudowana bateria Li-Ion, z portem micro USB.
Wejście Jack 3.5mm.
Opis działania:
1. Włącz głośnik Bluetooth
2. Włącz główny przełącznik w pozycji ON, dioda sygnalizacyjna
zaświeci się na niebiesko, głośnik spróbuje automatycznie wykryć
ostatnio sparowane urządzenie (telefon), dioda sygnalizacyjna
zacznie świecić szybkim przerywanym światłem. Aby wykryć nowe
urządzenie nasiśnij dłużej przycisk “ “ przez ok 2 sekundy.
Dioda sygnalizacyjna
P L

3
3. Włącz funkcję Bluetooth w urządzeniu (telefon) aby wykryć głośnik
a następnie połączyć się z nim. Podczas pierwszego połączenia
wpisz hasło: “0000” (Wyższe wersje mogą nie wymagać hasła,
mogą połączyć sie bezpośrednio). Po prawidłowym sparowaniu
urządzeń, dioda sygnalizacyjna będzie emitować światło niebieskie
wolno pulsujące. W tym momencie można odtwarzać dzwięki.
4. Po prawidłowym połączeniu, włacz muzykę z telefonu. Przytrzymaj
przycisk “ ” lub “ ” trzy sekundy aby przewinąć do tyłu lub
do przodu piosenkę. Po krótkim wciśnięciu tych przycisków piosenka zmieni się na następną lub poprzednią.
5. Poziom głośności dopasuj odpowiednio klawiszami “+” oraz ”-”
6. Odbieranie połączeń: naciśnij krótko przycisk “ ” aby odebrać
połączenie. Aby utrzymać prawidłową jakość połączenia, telefon
powienien znajdować się w odległości ok 50cm od głośnika.
Naciśnij ponownie przycisk “ ” aby rozłączyć połączenie.
Podwójne wciśnięcie przycisku “ ” wybierze ostatnie
połączenie.
Przód Tył Góra
Zdjęcia produktu:
INSTRUKCJA OBSŁUGI
P L

4
Rozwiązania potencjalnych problemów:
1.Głośnik nie chce się połączyć z telefonem:
Sprawdz czy głośnik przełączony jest w tryb szukania Bluetooth,
oraz czy funkcja Bluetooth w telefonie jest prawidłowo włączona.
Sprawdź czy telefon ma włączoną widoczność Bluetooth.
2. Brak dzwięku:
Sprawdź poziom głośności ustawiony w telefonie oraz na głośniku.
Sprawdz czy telefon nie ma wyciszonych dzwięków.
3. Głośnik nie da się włączyć:
Naładuj baterię w głośniku
Uwagi:
Gdy poziom naładowania baterii jest zbyt niski, głośnik będzie
sygnalizował to cichym dzwiękiem ostrzegawczym co każde 20
sekund.
Podczas ładowania baterii głośnik może jednocześnie odtwarz-
ać muzykę.
Jeżeli nie używsz głośnika, przełącznik głóny ustaw w pozycji
“OFF”, aby nie rozładowywać baterii.
INSTRUKCJA OBSŁUGI
P L

USER’S MANUAL
5
User’s Manual
Functions Introduction
● Built-in Bluetooth 2.1+EDR wireless module
● Bluetooth audio sound, perfect sound quality and bass eect
● 10M transmission distance
● Support iPhone,iPad and other devices with Bluetooth function
● Bluetooth hand free function, answer call easily
● Bluetooth music controlling functions
● Built-in li-ion battery, with micro USB interface
● 3.5 audio input jack
Quickly know the function well
1.Turn on Bluetooth Speaker:
2. Turn on the power switch, indicator light will be blue, it indicates
speaker re-connecting the Bluetooth equipment matched on the last
time, Bluetooth indicator light ash quickly is searching new Bluetooth
equipment, if fail to search, press key “ “ for more than two seconds
to force matched and then press key “ “ again to turn on speaker or
toggle power switch once more to re-search the Bluetooth, Bluetooth
search and connect:
EN

USER’S MANUAL
6
3. Turn on Bluetooth equipment to search and connect. For rst time
use, please enter password“0000”(high versions may do not need
password, can connect directly). When well connected, the indicator
light will ash slowly and have indicating sound.
Product Images:
Operation directions
1.Concetto to Telephone
● Turn on the switch on the back, after 3 seconds, speaker will have a
“tinkle” warning sound, at this state, indicator light is ashing slowly,
3 seconds later, speaker will have “honk” warning sound, blue
indicator light become to quickly ash, it indicates Bluetooth is under
searching states.
Positive side Back side Top
EN

USER’S MANUAL
7
● Turn on telephone Bluetooth setting to enter searching status
(dierent brand telephones will have dierent methods to turn on
Bluetooth setting ) searching result will display ”IK-SP69”, use the
password “0000”(4 zeros), then conrmed well connected to the
speaker Bluetooth, the speaker will have warning sound, it indicates
well connected between Bluetooth speaker and telephone. 30
seconds for whole operation (dierence in dierent brand
telephones). First time, it is necessary to use password for
identication of telephone and speaker, for the second time, no need
password, just click” IK-SP69” to connect.
● After well connected, play music from telephone, then use Bluetooth
keys to operate. Press key “ ” or “ ” three seconds to fast forward
or backward
● Adjust the volume key to suitable volume level, volume increase “+ ”,
volume decease ” - ”
● Answer call: When call coming from telephone, short press key “ ”
directly can answer. To make sure call quality, it should keep
Bluetooth within 50CM distance, press key “ ” directly to hang up
call. Double pressing key “ ” can repeat the last time number you
2.Connect to flat computer
Please refer to telephone operation directions
3.Connect to laptop
Due to many Bluetooth versions about laptops, connected methods
will be dierent. If can not connect for the rst time, it should be in
stored new version Bluetooth drive in the laptops.
EN

USER’S MANUAL
8
Solutions for common questions
1.Bluetooth can not connect to device
Please conrm the Bluetooth is under searching status, Bluetooth
equipment of connected device has already turned on
2. No sound
Please check if the volume switch turned o, please also check input of
connected device is Bluetooth, Bluetooth input volume is common
3. Bluetooth can not be turned on
Please charge the speaker
Attentions:
● When the power is weak, it will have “tinkle” warning sound in every
20 seconds.
● Speaker can continue to use when charging.
● When do not use speaker, please push the key switch to “OFF”, in
cause to power consumption.
EN

Made in P.R.C.
FOR MANTA EUROPE
Dział Obsługi Klienta
tel: +48 22 332 34 63 lub e-mail: serwis@manta.com.pl
od poniedziałku do piątku w godz. 9.00-17.00
Producent zastrzega sobie możliwość wprowadzenia zmian w specykację produktu bez uprzedzenia.
Strona główna www.manta.com.pl
Strona wsparcia technicznego www.manta.info.pl