Set Up
1.Insert the device to car cigar socket power supply(12V-24V DC power). You will see the screen as shown
channel in LCD display.
2.Tune your FM radio to one of pre-set FM frequencies used by the player.
3.Press the button or to set the player’s broadcast frequency to match the frequency you have
set on your radio.
Pre-set Broadcast Frequency
SD Memory Card & USB Flash Memory
1.Follow the instructions in the “Set Up” section of this manual.
2.Insert the SD memory card into the SD card slot ot the player.
3.Press the “ ” button to play/pause. Keep pvess “ ” key
to switch play mode ( ALL / FOLDER / SINGLE / RANDOM )
4.Press the “ ” button once to go to the previous file. Press
and hold the button to decrease the volume
SD
USB
Features & Functions
LCD Display
Previous Track & Volume Decrease
(USB flash Memory & SD card)
Press this button once to return to the previous
file. Press and hold to decrease the volume.
Press the button
To d e r e as e s t h e b ro a d ca s t f r eq u e n c y
Press the button
To i n c r ea s e t h e b ro a d ca s t f r eq u e n c y
Next Track & Volume
Increase
(USB flash memory & SD card)
Press this button once to advance to the next file.
Press and hold to increase the volume.
Play/Pause
(USB flash memory & SD card)
Press this button once to start playing an Mp3 file.
Press it again to pause.
SD MemoryCard Slot USB Port
12 -24Volt Adapter End
Six Position Flexible Joint
Power