Mannhart Mixer Bowl Guard Add On Kit Specifications

Item # ________________________________
Quantity _______________________________

C.S.I. Section 11400

MIXER BOWL GUARD

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

ADDITIONAL GUARDING . . .
WITHOUT SACRIFICING
PRODUCTIVITY OR SANITATION!

■ Bowl guards may be added to existing current
model Hobart mixers. Installation must be by
factory trained technician.

■ Bowl guards are standard on all new 20 quart
and larger mixers.

ADVANCED PROTECTION

■ Two piece guard adds protection to the mixing
operation.

■ Front portion of guard rotates around inside
rear portion.

■ Guard must be in closed position before mixer
will run.

■ Bowl support must be in the up and locked
position for the mixer to run continuously.

ADD-ON KIT

RUGGED CONSTRUCTION

■ Heavy-duty stainless steel wire front portion
and solid stainless steel rear portion are
designed to ensure durability under heavy
mixing applications.

OPERATOR CONVENIENCE

■ Front portion of guard rotates easily to add
ingredients and install or remove agitator. It
detaches in seconds for cleaning in dishwasher
or sink.

■ Rear portion of guard can be quickly cleaned in
position.

INGREDIENT CHUTE

■ Optional stainless steel chute can be attached
to the front portion for adding dry or wet
ingredients. It detaches easily for cleaning.

Bowl guard must be in closed position
before mixer will operate.

MIXER BOWL GUARD ADD-ON KIT

Bowl guard can be rotated open for fast
removal of agitator and bowl.

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

F-7946 – Mixer Bowl Guard Add-On Kit Page 1 of 1

F-7946 (REV. 8/03) LITHO IN U.S.A. (H-01)

Printed On Recycled Paper