Mannhart HL662 Installation Manual

ASSEMBLY INSTRUCTIONS

DECK PLATE – KIT NO. 937056

Use this kit for Hobart mixer model HL600, HL661, HL662 Legacy 60 Qt. Mixers.

PART NO. NAME OF PART AMT.

00-937056 Deck Plate Kit (complete) ..............................1

00-917999 Deck, Plate (Rear) .......................................... 1

00-917998 Deck, Plate (Front) ......................................... 2

SC-061-09 Cap Screw 3/8-16 x 1-1/4 ............................... 8

SC-037-01 Cap Screw, 1/2-13 x 1-1/2...............................6

0F-037259 Assembly Instructions .................................... 1

Disconnect electrical power supply and place a tag at the disconnect switch indicating that

you are working on the circuit.

1. Disconnect any rigid conduit and raise and block the mixer at least ve inches from the oor.

2. Assemble a Deck Plate and two 3/8-16 x 1-1/4 athead Cap Screws to each of the four legs of the
mixer base.

3. Carefully remove the blocks and lower the mixer to the oor.

4. The six 1/2-13 x 1-1/2 Cap Screws can be used to attach the mixer to the oor.

5. Restore electrical power supply or conduit to its original position, reversing step 1.

Use holes closest
together

(2) REAR DECK PLATES

MIXER BASE

BOTTOM

VIEW

701 S. RIDGE AVENUE

TROY, OHIO 45374-0001

Use holes furthest apart

(2) FRONT DECK PLATES

FORM 37259 Rev. B (October 2014)