Manitowoc Ice QD-0272A User Manual

Q-Model Series 270

Ice Cube Machine

• Up to 290* lbs. (132 kgs.) daily

ice production

*Production rating outside the scope of ARI Standard 820.

• Only 30" (76.2 cm) wide, 28.16" (71.52

cm) deep, and 38.50" (97.79 cm) high on 6" (15.24 cm) legs

• 100 lb. (45.45 kg) ice storage capacity

• Slide up and in bin door tucks under ice

machine top cover. Patented ice damper maximizes ice storage capacity

• Stainless steel exterior with the

fit and finish of an appliance

• Patented cleaning and

sanitizing technology

• R-404A CFC-free refrigerant

• Warranty

5-year parts and 5-year labor coverage on ice machine evaporator

5-year parts and 3-year labor coverage on ice machine compressor

3-year parts-and-labor coverage on all other components

ISO 9001:2000 Quality System Certified

America's #1 Selling Ice Machine

Ice Cube & Flake Machines • Ice Storage Bins • Ice Dispensers

Q-Model Series 270

MANITOWOC ICE, INC.

2110 South 26th Street, P.O. Box 1720

Manitowoc,WI 54221-1720, USA

Ph: 920-682-0161 • Fax:920-683-7589

Visit us online at www.manitowocice.com

Manitowoc Q-Model 270 Series

Air in left, air out right, no side vents.

Ice production 24 hours

Power

Model Cube size lbs. kgs. kWh/100 lbs.

QD-0272A dice 215 98 9.0

QD-0273W dice 245 111 7.3

QY-0274A half-dice 215 98 9.0

QY-0275W half-dice 245 111 7.3

Water usage/100 lbs./45.4 kgs. of Ice

Potable Water: 33.5 gallons,127 liters • Water-cooled Condenser: 167 gallons, 632 liters

“A” or “W” following model number indicates “Air” or “Water” condensing unit.

†Production for Dice and Half Dice cubes.

Installation Note - There is no minimum clearance required, however recommended clearance for top, sides, and back is 5" (12.7 cm).

28.16" (71.52 cm)

30.00" (76.20 cm)

20.69" (52.55 cm)

6.00"

(15.25 cm)

32.50"

(82.55 cm)

A B

1/2" (1,27 cm) Bin Drain

Electrical Entrance 3/8" (0,95 cm) F.P.T.

Ice Making Water Inlet 1/2" (1,27 cm) F.P.T.

Water Condenser Outlet (water-cooled units)

1/2 " (1,27 cm) F.P.T. Water Condenser Inlet

1.25"

(3.17 cm)

6.84"

(17.37 cm)

11.17"

(28.37 cm)

8.80"

(22.35 cm)

13.48"

(34.23 cm)

12.36"

(31.39 cm)

2.125"

(5.39 cm)

Q-270

Ice Machine Electric

Specifications

Air Flow Front View

115/60/1. (208-230/60/1 and 230/50/1 also available.) 115/60/1 ice machines are factory pre-wired with a 6' (180 cm) power cord and NEMA 5-15P-plug configuration. 208-230/60/1 ice machines are factory pre-wired with a 6' (180 cm) power cord only, no plug is supplied.

Total Amps:

Air-cooled — 8.5 amps. Water-cooled — 7.7 amps.

Maximum fuse size:

Air and Water-cooled — 15 amps. HACR-type circuit breakers can be used in place of fuses.

BTU Per Hour:

3,800 (average) 6,000 (peak)

Compressor:

Nominal rating: 1/3 HP

Cupra-Nickel Condenser:

(Water-cooled models) Adds protection from corrosive water elements.

Operating Limits:

• Ambient Temperature Range:

35˚ to 110˚F (1.7˚ to 43.3˚C)

• Water Temperature Range:

33˚ to 90˚F (0.6˚ to 32.2˚C)

•

Water Pressure Ice Maker Water In:

Min. 20 psi (137.9 kPA) Max. 80 psi (551.1 kPA)

•

Condenser Inlet Water In:

(Water cooled only) Min. 20 psi (137.9 kPA) Max. 150 psi (1,034.2 kPA)

Air Filter

2 Cube Sizes Available

Front Access

Dice

⁄8" x 7⁄8" x 7⁄8"

(2.22 x 2.22 x 2.22 cm)

Half Dice

⁄8" x 11⁄8" x 7⁄8"

(.95 x 2.86 x 2.22 cm)

Certified IEC 335-1 IEC 335-2-24

®

US LISTED

Initiate ice, off and clean operations with simple upfront selector switch. No need to remove front panel.

24-HOUR PRODUCTION †

AIR-COOLED UNIT WATER-COOLED UNIT

air temp water temp air temp water temp

˚F 50˚ 70˚ 90˚ ˚F 50˚ 70˚ 90˚

˚C 10˚ 21˚ 32˚ ˚C 10˚ 21˚ 32˚ 70˚ 280 245 220 70˚ 290 255 235 21˚ 127 111 100 21˚ 132 116 107 80˚ 275 240 215 80˚ 285 250 230 27˚ 125 109 98 27˚ 130 114 105 90˚ 250 215 190 90˚ 280 245 225 32˚ 114 98 86 32˚ 127 111 102

Slides out from left side front without tools, easy to clean, reusable filter protects condenser from lint, grease and dust.

lbs. kgs.

Certified in Accordance with ARI Ice Storage Bins Certification Program, which is based on ARI Standard 820

Air Flow Out

Air Flow In