Manitowoc Ice K56 User Manual
FL OJET K56 SERIES
The Flojet Model K56 Series Pump
■ Capable of supplying up to three fast flow valves
simultaneously.
■
Operates from an unpressurized water reservoir or from a
city water source regulated at 30 psi (2.1 bar) maximum.
■ Features quick-disconnect ports reducing total
service and installation time.
■ Compact design with performance and reliability.
■ Bladder tank reduces pulsation.
K56 SERIES
CO
2
OPERATED
WATER BOOSTER
SY STEM
K56 SERIES
CO
2
OPERATED
WATER BOOSTER
SY STEM
CO2OPERATED
WATER BOOSTER SYSTEM
FL OJET K56 SERIES
TYPICAL INSTALLATION
APPLICATIONS
■ Supplies consistent water pressure to beverage
■ dispensers, coffee machines, water filtration systems,
■ carbonators and ice machines.
■ Supplies up to 4 GPM (15 L /min).
■ For use when water requirement is over 1.7 GPM
■ (6.4 L/min).
SPECIAL FEATURES
■ Half-gallon accumulator tank maintains constant flow
■ requirements.
■ Capable of CO
2
inlet pressures up to 90 psi (6.2 bar).
■ Ultimate performance and reliability, with extended
■ service life.
■ Quiet operation with exhaust muffler.
■ Easy installation with all quick disconnect ports.
DIMENSIONS inches (mm)
F100-031 Rev 9/99-5M
www.flojet.com
www.flojet.com e-mail: sales@flojet.com
F100-176 Rev 03/00-10M
For further information, contact your FLOJET representative, or write to:
FLOJET
20 Icon • Foothill Ranch, CA 92610
Tel: 949-859-4945
1-800-2 FLOJET
Fax: 1-949-859-1153
FLOJET (EUROPE) LTD.
Unit 1, Avant Business Centre
Denbigh West Industrial Estate
Milton Keynes, Bucks, England MK1 1DL
Tel: 44-1908-370088 • Fax: 44-1908-373731
ISO 9001 Certified
Water
Supply
Water Regulator
30 PSI (2.1 bar) max.
Dispenser
CO2 Supply
K56 Series
System
SPECIFICATIONS
Pump Design Positive Displacement, Double Diaphragm
Power Source CO2Gas, Nitrogen or Compressed Dry Filtered Air
Materials of Construction (wetted parts) Polypropylene,
Santoprene®, EPDM, Nylon, Butyl, PVC,
AISI 303 & 304 Stainless Steel, Brass
Temperature Limits 34˚ - 120˚ F (1.1˚ - 49˚ C)
Weight 5.42 lbs. (2.46 kg.)
Dimensions 12” H x 11.5” W x 7” D
(304.8 mm x 292.1 mm x 177.8 mm)
Displacement 3.2 oz. per cycle
Bladder Tank Precharged to 20 PSI (1.4 bar)
Port Fittings Gas Inlet & Outlet 1/4” (6.3 mm) Barbed
Pump Product Inlet 1/2” (12.7 mm) Barbed
Tank Product Outlet 1/2” (12.7 mm) Barbed
Self Priming Up to 10 ft. (3.05 m)
Operating Pressure 60 psi (4.1 bar) min. / 90 psi (6.2 bar) max.
Liquid Inlet Pressure 30 psi (2.1 bar) max.
Flow Rate 5 GPM. (18.9 LPM) - Open Flow
(Flow rate is higher when accumulator tank is not empty)
Approvals NSF listed, CE
PUMP PERFORMANCE
01.02.03.0 4.0 5.0
(3.8) (7.6) (11.4) (15.1) (28.5)
120
(8.3)
100
(6.9)
80
(5.5)
60
(4.1)
40
(2.8)
20
(1.4)
0
Pressure in PSI (BAR)
Flow Rate in GPM (L/min)
1/2" Ports, 0 PSI Fliud
9
0
P
S
I A
ir In
le
t
80 PSI A
ir Inlet
6
0
P
S
I A
ir In
le
t
01.02.03.0 4.0 5.0
(3.8) (7.6) (11.4) (15.1) (28.5)
120
(8.3)
100
(6.9)
80
(5.5)
60
(4.1)
40
(2.8)
20
(1.4)
0
Pressure in PSI (BAR)
Flow Rate in GPM (L/min)
1/2" Ports, 30 PSI Fluid
9
0
P
S
I
A
i
r
I
n
l
e
t
8
0
P
S
I
A
i
r
I
n
l
e
t
6
0
P
S
I
A
i
r
I
n
l
e
t
12”H
7”D
11.5”W
Loading...