Manitowoc Ice K00384 User Manual
TOP
(2)
Step 1 - Slide side panels onto
Step 2 - Place support angles
Step 3 - Screw legs into the base
K00384 Ice Machine Stand
Installation Instructions
The stand must be secured to the wall with the bracket and fasteners provided in this kit.
The security bracket must be attached to two studs.
The ice machine must be secured to the stand top cover with the supplied bolts (4) and washers (4).
The stand top cover must be secured to the stand with the screws (2) provided.
Material List
TOP
PANEL
REAR
PANEL
FRONT
PANEL
SUPPORT
ANGLE
(2)
LEG
Cabinet Assembly
(4)
BASE
base.
under the side panels.
WARNING
BRACE
PANEL
TOP
COVER
(2)
SIDE
PANEL
(2)
BOLT (4)
WASHER (4)
CAP
PLUG
(4)
(through support angles & side panels).
COVER
SCREWS
SECURITY
BRACKET
BOLT (2)
WASHER (2)
NUT (2)
Manitowoc Ice, Inc.
2110 South 26
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Page 1 of 3
Web Site - www.manitowocice.com 07/23/07
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000002675
slots on the side panels.
Step 5 - Place the top panel with the
Step 6 - Install ½ of the security
Step 4 - Place brace panels on the
inside of the frame, engaging the hook
flanges of the brace to the rectangular
rubber grommets along open sides.
This stand must be secured to a wall to prevent tipping.
WARNING
bracket to stand.
Step 7 - Install top cover onto stand.
Step 8 - Install rear panel.
Step 9 - Move into position and level front to back and side to side.
Step 10 - Locate studs in wall and mark bracket screw locations (2 studs must be used).
Step 11 – Provide screws suitable for your building material and mount second ½ of bracket to wall.
Manitowoc Ice, Inc.
2110 South 26
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Page 2 of 3
Web Site - www.manitowocice.com
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000002675
07/23/07
Loading...