Manitowoc Ice K00346 User Manual

Screws
Bulkhead

K00346 DISPENSER BAFFLE KIT

Installation Instructions

The K00346, dispenser baffle kit, must be used with the S-0300, S-450, S-0500, S-0600, S-0850, and S-1000 ice
machines, when the ice machine is used on any ice/beverage dispenser.

1. Remove both front panels.

2. Examine the ice machine to see if the machine has four screws on the lower front plastic panels (see drawing).

3. If there are screws, remove them from the countersunk holes on the front surface of the machine. Save the screws.

4. Install the deflector, using the four screws that were removed in step 3.

5. Four screws and two backing plates are in t he kit.

6. If there are no screws on the ice machine (step 2), pierce the thin plastic countersunk holes, install the backing

plates, and install the deflector, using the screws from the kit.

7. Replace the front panels.

Backing Plate to
be Inserted into
Side Pocket of

Backing Plate to be

Inserted into Side

New Ice Baffle

Screws

Pocket of Bulkhead

Manitowoc Ice, Inc.

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone [phone], Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8015113
Web Site - www.manitowocice.com Rev. 07/06/04