Manitowoc Ice K00119 User Manual
Ice Machine Back
Supplied Screws
Both Sides
48” Gasket
K00119 BIN DEFLECTOR KIT
Installation Instructions
NOTE: This kit will convert a C-900/C-950 bin to a C-970 bin or a C-910/C-960 bin to a C-980 bin. This kit is also used
on Manitowoc F-style bins, when stacking Q-1300/1600/1800 ice machines.
1. Remove the gasket material along the front and both sides of the bin.
2. Remove the #8 screws holding the current ice deflector. Save these screws – a total of six from a C-900/C-910; a total
of eight from a C-950/C-960.
3. Remove the ice deflector.
4. Place new ice deflector in position and use the slots in the side flanges as guidance to drill four 1/8” holes.
5. Fasten the ice deflector using the screws removed in step 2 for t he front and the four su pplied screws, two each side,
for the side flanges. NOTE: C-900/C-910 only – use additional two screws, sh ipped with the new ice deflector, on
the front.
6. Install the new gasket material along the fron t and sides of the bin.
24” Gasket
Supplied Screws
Manitowoc Ice, Inc.
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8010253
Web Site - www.manitowocice.com Rev. 06/13/03
New Deflector
Drill 1/8” Holes
Both Sides
(See Step 4)
Loading...