Manitowoc Ice CA260, CA200, HA300, FA290 User Manual
SOLID STATE RELAY ASSY.
r
FOR CA200, CA260, FA290 AND HA300 DISPENSERS
IMPORTANT
Before replacing this relay on a QPA310 ice dispenser:
Check for moisture on the two-pin Molex connector for the dispense switch
wiring harness.
If moisture is present, dry and seal the ends of the connector with silicone
sealant.
Moisture on this connector can simulate a defective relay.
Black Power Cord
Vend Switch
Black
Switch
Black T3
Gear Moto
Sinpac
Switch
Vend Switch
Black
Black Power Cord
Switch
1
Black T3
Gear Motor
2
White
CA200/CA260
FA290/HA300
Coil
White
Capacitor
Capacitor
White
Power Cord
1.88
1.88
Solid State
White
Coil
Junction Box
Drill one .136 dia. hole for solid state relay.
Attach relay with two screws provided.
Junction Box
White
3 4
Sinpac
Switch
White
Power Cord
Drill two .136 dia. holes for solid state relay.
Attach relay with two screws provided.
Manitowoc Ice, Inc.
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8010213
Web Site - www.manitowocice.com Rev. 08/20/03
Loading...