Makita MAC500 User Manual
Specifications and Main Features
- Model No.:MAC500
- Power: 1.5 HP
- SCFM @ 40 psig: 4.0
- SCFM 90 psig:1.5
- Cut-in Pressure: 100 PSI
- Cut-out Pressure: 125 PSI
- Voltage (Single Phase): 110-120
- Fuse Type: Quick Acting
- Amperage at Max Pressure: 10.0 (Actual)
- Tank Size: 3.0 Gallon
- Weight: 30 Pounds
- U.L. & CUL Listed
- Minimum Circuit Requirement: 15 AMPS
Frequently Asked Questions
Q: What is horsepower of MAC500 air compressor?
A: It is at 1.5.
Q: What is tank size of MAC500 air compressor?
A: 3.0 gallon.
Q: What are the SCFM for each rating of MAC500?
A: SCFM at 40 psig is rated at 4.0 SCFM and 90 psig rating is 2.9. A: What is the cut- in and cut-out pressure for the MAC500 air compressor? A: Cut- in pressure is 100PSI and cut-out pressure is 125 PSI.
Q: What is the voltage of the MAC500 air compressor?
A: A voltage range of 110- 120 volts is necessary to operate MAC500.
Q: What fuse does one recommend for MAC500?
A: The suggestion is for a quick acting fuse.
Q: Air compressor MAC500’s weight is?
A: It weighs about 30 lbs.
Q: Is the MAC500 air compressor endorsed with U.L & CUL compounds?
A: Yes, it has a U.L. and CUL.
Q: MCB for MAC500 runs at what minimum circuit?
A: A minimum circuit of 15 AMPS is required.
User Manual
Loading...