Makita HM181 User Manual

70 LB. BREAKER HAMMER

ANTI-VIBRATION TECHNOLOGY FOR 3X LESS VIBRATION

Outperforms the Competition with a Powerful 15 AMP Motor; 1,100 BPM

and 63.0 Joules of Impact Energy

Low Noise Level (107dB) and Vibration Reduces Operator Fatigue and

Increases Productivity

Equipped with Automatic Brush Cut-out System, Cylindrical Tool Holder

and Warning Indicator Lamps to Tackle Daily Rental Abuse

Ideal for Concrete Demolition, Chipping, Breaking, Digging, Edging,

Channeling,Driving and Many More Applications

PERFORMANCE

Anti-Vibration Technology (AVT) is an

innovative counterbalance system for

3x less vibration (only 8 m/s

POWER

Chipping Concrete with Bull Point Bit

Power ful 15 AMP motor delivers

63.0 joules of impact energy for 30% faster,efficient chipping

Comp.

)

Model

HM1810

DURABILITY

Equipped with warning indicator

lamps and automatic brush cut-out

system to protect the motor

RELIABILITY

Cylindrical tool holder allows

greater serviceability should the

original bolt holes become damaged

ANTI-VIBRATION TECHNOLOGY

70 LB. BREAKER HAMMER

Model HM1810

Features & Benefits

■ Counterbalance system reduces vibration to only 8 m/s

■ Powerful 15 AMP motor; efficient 1,100 BPM to tackle the most demanding jobs

■ Lowest noise level in its class at only 107dB

■ Accepts popular 1-1/8" hex hammer steel

■ Automatic brush cut-out system protects commutator for longer tool life

■ 16.4 ft.jobsite cord for greater versatility and instant power

■ Cylindrical tool holder enables new bolt holes to be drilled should the

original bolts break

■ Warnin g lamp indicates trouble with the cord; AC/DC switch for use with

alternative power sources

■ Large, easy to operate switch for operator comfort and control

Standard Equipment

■

Hex Wrench #5 (783203-8)

for unmatched comfort

Specifications

Bit Type 1-1/8" Hex Blows per Minute (BPM) 1,100 Impact Energy 63.0 Joules AMPS (120V) 15.0 Noise Level 107dB Vibration Level 8 m/s Cord Length 16.4 ft. Overall Length 32-1/2" Net Weight 70.6 lbs. Shipping Weight 81.6 lbs. Master Carton Qty. 1 UPC Code 088381-06541-2

Accessories

1-1/8'' Hammer Steel

Bull Point (751420-A)

Demolition applications and starts holes in concrete

Flat Chisel (751220-A)

General purpose chipping, edging and channeling

Scaling Chisel (751221-A)

Wide chisel with two cutting angles for chipping dried concrete

One Piece Bushing Tool (751717-A)

Removes excess concrete and roughens surface

Asphalt Cutter (751620-A)

Cuts asphalt or hard ground (not for concrete)

Clay Spade (751622-A)

Digs clay,shale, hard packed gravel and dirt

Other Accessories

Hammer Carrier (122010-A)

For easy transporting. Conven ient tubes for accessory storage

3.5 oz. Bit Grease (181573-3)

Used to lubricate the steel shanks

Model HM1810

Makita offers a wide variety of accessories for our Breaker Hammers. For a complete listing, please refer to the Makita General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.

All specifications subject to change without prior notice. All models and accessories subject to stock on hand. NTF-0805 5M MA-0603-05 For more information, call 1-800-4MAKITA or visit makitatools.com

Makita U.S.A., 14930 Northam St.,La Mirada, CA 90638