Makita GA7011Cx User Manual
7'' ELECTRONIC ANGLE GRINDER
ELECTRONIC SPEED CONTROL MAINTAINS CONSTANT SPEED UNDER LOAD
ELECTRONIC SPEED CONTROL MAINTAINS CONSTANT SPEED UNDER LOAD
Soft-Start Technology Delivers Smooth Start-ups
Soft-Start Technology Delivers Smooth Start-ups
All Metal Gear Housing for Added Protection
All Metal Gear Housing for Added Protection
Protective Zig-Zag Varnish Seals Motor from Contaminants and Reduces Heat
Protective Zig-Zag Varnish Seals Motor from Contaminants and Reduces Heat
Powerful 15 AMP Motor and 6,000 RPM for Continuous Use
Powerful 15 AMP Motor and 6,000 RPM for Continuous Use
“Tool-less”Wheel Guard Adjustment for One-Handed Operation
“Tool-less”Wheel Guard Adjustment for One-Handed Operation
Ideal for Welders, Fabricators, Pipe Fitters, Installers, Automotive
Ideal for Welders, Fabricators, Pipe Fitters, Installers, Automotive
and Many Other Industrial Applications
and Many Other Industrial Applications
RELIABILITY
RELIABILITY
Labyrinth construction seals motor &
bearings from contamination by
creating a complex set of channels
PERFORMANCE
PERFORMANCE
13.7
lbs.
Comp.
Power-to-Weight
Ratio
2.0
AMPS/
lbs.
1.1
AMPS/
lbs.
Comp.
Weight
7.5
lbs.
15 AMPS of pure power & weighs only
7.5 lbs. for continuous operation;
high power-to-weight ratio (2.0)
Model
Model
GA7011C
GA7011C
DURABILITY
DURABILITY
Durable ball bearing construction,
thicker coil wires and protective
zig-zag varnish for longer tool life
SPEED
SPEED
Gear housing rotates 90° left and
right for operator convenience in
cutting applications
CONTINUOUS OPERATION
Grinding
Wheel
Multi-Disc
Hubbed
Grinding Wheel
Resin
Fiber Disc
Hubbed
Multi-Disc
Flex Wheel
Super Thin
Cut-off Wheel
7'' ELECTRONIC ANGLE GRINDER
Model GA7011C
Features & Benefits
Features & Benefits
n 15 AMP motor design for high output power in a more compact tool (only 7.5 lbs.)
n Soft-start feature for smooth start-ups
n Externally accessible brushes for greater serviceability and longer motor life
n Rotatable gear housing rotates 90° for cutting applications
n Electronic speed control maintains constant speed under load
n “Tool-less” wheel guard adjustment for easy clamping
n Great for Welders, Fabricators,Masons,Maintenance/Repair and more
Standard Equipment
Standard Equipment
n
7'' Grinding Wheel (741413-3)
n
Wheel Guard (163446-2)
n
Lock Nut (193465-4)
n
Lock Nut Wrench (782412-6)
n
Side Handle (152490-4)
n
Inner Flange (224378-9)
Specifications
Specifications
Grinding Wheel 7''
Wire Cup Brush 6''
Sanding Disc 7''
No Load Speed 6,000 RPM
AMPS (120V) 15.0
Spindle Thread 5/8'' - 11 UNC
Overall Length 17-7/8"
Net Weight 7.5 lbs.
Shipping Weight 11.9 lbs.
Master Carton Qty. 4
UPC Code 088381-05568-0
Accessories
Accessories
Model GA7011C
Warn ing: Consult owner/operator manual and adhere to all safety precautions for accessory items. Always use
recommended guards. Failure to do so may result in serious injury or death. Refer to ANSI B7.1 and owner/operator
manual for proper accessory mounting and grinding procedures and always wear ANSI Z87.1 eye protection.
Makita offers a wide variety of accessories for Angle Grinders. For a complete listing, please
refer to the Makita General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0605-7.5M MA-0392-05 For more information, call 1-800-4MAKITA
makitatools.com
Makita U.S.A., 14930 Northam St.,La Mirada, CA 90638
Loading...