Makita EW300TR, EW400TR, EW200TR User Manual
PUMP
EW2OOTR
MODEL
EW3OOTR
EW400TR
INSTRUCTION MANUAL
I
ISSUEEMD-PU0835
I
piEGKq
FOREWORD
Thank you for purchasing a Makita trash pump.
This manual covers operation and maintenance of trash pumps.
All information in this publication is based on the latest product infor-
of
mation available at the time
Please read this manual carefully before operating.
approval for printing.
CONTENTS
Page
1.
PUMP SAFETY 1
2.
COMPONENTS
3.
PREPARATIONS
4. STARTING THE ENGINE
5.
OPERATION
6.
STOPPING THE ENGINE
7. MAINTENANCE SCHEDULE
8. "HOW-TO" MAINTENANCE 10
9.
TROUBLESHOOTlNG 12
10. PREPARATIONS
11. OIL SENSOR lNSTRUCTlONS 15
...............................................
...............................................
FOR
STARTING
.............................
......................................
..................................................
.....................................
..................................
....................................
........................................
FOR
STORAGE 14
.............................
................................
2
3
5
7
a
9
ID
PUMP
SAFETY
Please make sure you review each precaution carefully.
SURROUNDINGS
H
Operate the pump on a stable, level surface free of small rocks, loose gravel,
etc.
H
Keep pump at least 3 feet
H
Keep pump away from flammables and other hazardous materials (trash,
(1
meter) away from buildings.
rags, lubricants, explosives).
FIRE PREVENTION
m
Be sure to stop the engine prior to refueling.
H
Do
not overfill fuel tank.
H
If spillage does occur, wipe away spilt fuel thoroughly and wait until fuel has
dried before starting engine.
H
Do
not operate while smoking or near an open flame.
EXHAUST PRECAUTION
H
Never inhale exhaust gasess; they contain carbon monoxide, a colorless,
odorless, extremely dangerous gas which can cause unconsciousness
death.
H
Never operate the pump indoors
tunnel.
H
Exercise extreme care when operating near people and domestic animals.
or
in an enclosed area such as a cave or a
or
OTHER IMPORTANT POINTS
H
Keep away from rotating parts and hot parts while the pump is running.
Never permit anyone to operate the pump without proper instructions.
H
Know how to stop the pump quickly and understand operation of all the
controls.
H
Tighten the fuel tank cap securely and close the fuel cock before transit.
H
Check the engine oil and refill if necessary.
H
Carefully check fuel pipes and joints for looseness and fuel leakage.
-1-
Spark plug
\
Fuel cock
Speed control lever
Fuel tank Plug(priming) Pump strainer
two
Drain plug (at
places)
\
-2-
3.
PREPARATIONS
1.
Connect the suction hose.
Use a reinforced-wall or wire braided hose to
prevent suction collapse. Since the pump’s
self-priming time is directly proportional to
hose length, a short hose is recommended.
tion hose. Gravel or debris sucked
into the pump will cause serious
2.
Connect the discharge hose.
When using a fabric hose, always use a hose band to prevent the hose from
disconnecting under high pressure.
3.
Check the engine oil
Engine oil is a major factor affecting engine performance and service life.
Nondetergent or vegetable oils are not recommended.
Use oil classified
If the oil level is below the fill level line on the dipstick, refill with the proper oil (see
table) to edge of the oil fuller neck.
Be sure to check the oil level on a level surface with the engine stopped.
“SC”
or higher grade.
level.
FOR
STARTING
Single grade
Multlgrade
Ambient
E
I I I I
-
0
-10
0
-3-
10
20
I
30
I
40’C
Loading...