Cordless Angle Drill
Satisfy Professional's Needs
DA332D
10 mm (3/8")
/ DA333D
10 mm (3/8")
Compact Angle Head Height
& Center Height
63
[
Head height
mm
]
Fast drilling
[
Center height
23.5
*
mm
]
Up to
Drilled holes through a 30mm thick Lauan with ø9mm Auger bit.
* Comparison to Previous models.
Ergonomically designed handle with sure grip
35%
Photo: DA332D
DA332D
Keyed Drill Chuck
DA333D
Keyless Drill Chuck
Compact head height
shorter than previous models (DA332D : -3mm, DA333D : -4mm)
DA332D
Head height
63mm
DA333D
Head height
84mm
Center height
Center height
23.5mm
23.5mm
Length
LED job light with preglow
and afterglow functions
Keyless drill chuck
(DA333D only)
313mm
Large switch lever convenient
for tightening screws
Easy-to-operate
push button type F/R
change switch
On-tool chuck key storage
for fast & convenient bit changes
(DA332D only)
Comparison of work speed
Drove a ø4.1mm x 38mm wood
screw into Lauan.
DA332D/ DA333D
DA332D/ DA333D
Previous models.
Previous models.
0
slow
The test results depend to a great extent on the hardness of the material, etc.
*
Numbers in the charts above are relative values when the capacities of Previous models is indexed at 100.
100
100
135
135
Drilled holes through a 30mm
thick Lauan with ø9mm Auger bit.
DA332D/ DA333D
DA332D/ DA333D
Previous models.
140
fast
Previous models.
0
slow
100
100
135
135
Drilled holes through a 30mm
thick SPF with ø12mm Auger bit.
DA332D/ DA333D
DA332D/ DA333D
Previous models.
Previous models.
140 140
0
slow
fast
100
100
Cordless Angle Drill
DA332D
Variable Speed
Brake
Keyless Chuck
(DA333D only)
Reversing
Built-in Job Light
Carrying Case
10 mm (3/8")
Standard Equipment :
/ DA333D
Capacity
No Load Speed (RPM)
Head Height
Center Height
Vibration Level
Sound Pressure Level
Dimensions (L x W x H)
Net weight
The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTA-Procedure 01/2014,
10 mm (3/8")
DA332D
Steel: 10 mm (3/8")
Wood: 12 mm (1/2")
0 - 1,100
63 mm (2-1/2")
23.5 mm (15/16")
Drilling Into Metal: 2.5 m/s² or less
70 dB(A) or less
with BL1016/BL1021B: 313x68x86 mm
(12-3/8"x2-11/16"x3-3/8")
with BL1041B: 332x68x86 mm
(13-1/8"x2-11/16"x3-3/8")
1.2 - 1.3 kg (2.6 - 2.9 lbs.)
Bit, Belt Clip, Battery, Charger
DA333D
Steel: 10 mm (3/8")
Wood: 12 mm (1/2")
0 - 1,100
84 mm (3-5/16")
23.5 mm (15/16")
Drilling Into Metal: 3.0 m/s² or less
70 dB(A) or less
with BL1016/BL1021B: 313x68x95 mm
(12-3/8"x2-11/16"x3-3/4")
with BL1041B: 332x68x95 mm
(13-1/8"x2-11/16"x3-3/4")
1.2 - 1.4 kg (2.7 - 3.0 lbs.)
DA332 only
Chuck Key, Chuck Key Holder
120
120
fast
Charging Time
DC10SB
BL1016
12V max 1.5Ah
BL1021B
12V max 2.0Ah
BL1041B
12V max 4.0Ah
Items of standard equipment and specications may vary by country or area.
22 50
30 70
60 130
DC10WD
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN 201709
Loading...