Makita CL070D, CL100D User Manual

Download

ENGLISH (Original instructions)

INSTRUCTION MANUAL

Cordless Cleaner

CL070D CL100D

IMPORTANT: Read Before Using.

010013

ENGLISH (Original instructions)

SPECIFICATIONS

Model CL070D CL100D

Capacity 600 mL

Continuous use Approx. 8 min. Approx. 12 min.

Overall length 966 mm

Net weight 0.81 kg 0.88 kg

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equipment. Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Ni-MH Li-ion

Intended use The tool is intended for collecting dry dust.

IMPORTANT

SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING - To reduce the risk of fire, electric shock or injury:

1. Do not expose to rain. Store indoors.

2. Do not allow to be used as a toy. Close

attention is necessary when used by or near

Rated voltage D.C. 7.2 V D.C. 10.8 V

END004-4

children.

3. Use only as described in this manual. Use only

manufacturer's recommended attachments.

4. Do not use with damaged battery. If appliance

is not working as it should, has been dropped, damaged, left outdoors, or dropped into water,

Do not dispose of electric equipment or battery pack together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment, 2006/66/EC on batteries and accumulators and waste batteries and accumulators and their implementation in accordance with national laws, electric equipment and battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

ENE017-1

return it to a service center.

5. Do not handle appliance with wet hands.

6. Do not put any object into openings. Do not

use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

7. Keep hair, loose clothing, fingers, and all parts

of body away from openings and moving parts.

8. Turn off all controls before removing the

battery.

9. Use extra care when cleaning on stairs.

10. Do not use to pick up flammable or

combustible liquids, such as gasoline, or use in areas where they may be present.

11. Use only the charger supplied by the

manufacturer to recharge.

ENA005-3

12. Do not pick up anything that is burning or

smoking, such as cigarettes, matches, or hot ashes.

13. Do not use without filters in place.

14. Do not charge the battery outdoors.

15. This appliance is not intended for use by

persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

16. Children should be supervised to ensure that

they do not play with the appliance.

SAVE THESE INSTRUCTIONS.

This appliance is intended for household use.

ENB114-2

ADDITIONAL SAFETY RULES

1. Read this instruction manual and the charger

instruction manual carefully before use.

2. Do not pick up the following materials:

− Hot materials such as lit cigarettes or

spark/metal dust generated by grinding/cutting metal

− Flammable materials such as gasoline, thinner, benzine, kerosene or paint

− Explosive materials like nitroglycerin

− Ignitible materials such as Aluminum, zinc,

magnesium, titanium, phosphorus or celluloid

− Wet dirt, water, oil or the like

− Hard pieces with sharp edges, such as

wood chips, metals, stones, glasses, nails, pins or razors

− Powder to clot such as cement or tonor

− Conductive dust such as metal or carbon

− Fine particle like concrete dust

Such action may cause fire, injury and/or property damage.

3. Stop operation immediately if you notice

anything abnormal.

4. If you drop or strike the cleaner, check it

carefully for cracks or damage before operation.

5. Do not bring close to stoves or other heat

sources.

6. Do not block the intake hole or vent holes.

SAVE THESE INSTRUCTIONS.

ENC007-4

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical attention right away. It may result in loss of your eyesight.

5. Do not short the battery cartridge: (1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a

container with other metal objects such as nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain. A battery short can cause a large current flow, overheating, possible burns and

6. Do not store the tool and battery cartridge in

7. Do not incinerate the battery cartridge even if

8. Be careful not to drop or strike battery.

9. Do not use dropped or struck battery.

even a breakdown.

locations where the temperature may reach or exceed 50 ﾟ C (122 ﾟ F).

it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power.

2. Never recharge a fully charged battery

cartridge. Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F). Let a hot battery cartridge cool down before charging it.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or checking function on the tool.

Installing or removing battery cartridge

1. Battery cartridge

2. Button

010015

• Always switch off the tool before insertion or

removal of the battery cartridge.

• To remove the battery cartridge, withdraw it from

the tool while pressing the buttons on both sides of the cartridge.

• To insert the battery cartridge, hold it so that the

battery cartridge front shape fits to that of the battery installment opening and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you.

• Do not use force when inserting the battery

cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.

Switch action

010016

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates properly and returns to the "OFF" position

when released. To start the tool, simply pull the switch trigger. Release the switch trigger to stop.

1. Switch trigger

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any work on the tool.

Disposing of Dust

CAUTION:

• Empty the cleaner before it becomes too full, or the

suction force weakens.

• Be sure to empty out the dust inside the cleaner

itself. Failure to do so may cause the filter to be clogged or the motor to be damaged.

1. Capsule

2. Suction inlet

010022

In order to drop dust sticking on the filter in the capsule, tap the capsule 4 or 5 times with your hand.

010023

Now point suction inlet downwards, turn capsule in direction of arrow in diagram, and disconnect capsule slowly and straight.

NOTE:

• Dust may spill out when capsule is opened, so be

sure to set a garbage bag beneath capsule.

010024

1. Capsule

2. Suction inlet

1. Prefilter

2. Capsule

Remove accumulated dust from inside of capsule and off of prefilter.

1. Prefilter

2. Securing lip

NOTE:

• Make sure filter is put on straight without being

peeled back. If filter is put on incorrectly as shown in diagram, dust will get into motor housing, and cause motor failure.

1. Filter

010025

Twist prefilter in direction of arrow to unfasten securing lip from cleaner unit and then pull off prefilter.

010026

Clean out fine dust from prefilter. Next, remove filter, and lightly tap to dislodge dust.

1. Filter

2. Prefilter

Reassembly

1. Filter

010027

Put on filter until it is fully in position on the cleaner unit.

010028

Connect prefilter. At this time, make sure to twist prefilter so that securing lip is firmly locked into cleaner unit.

010029

010030

Connect capsule. Align projection on capsule with projection on handle and then firmly twist capsule in direction of arrow until it is secured.

010031

1. Prefilter

2. Securing lip

1. Capsule

2. Handle

3. Projection

010032

NOTE:

• Always remove dust ahead of time, as suction

power will be reduced if there is too much dust in

cleaner.

• Always be sure to check that both filter and prefilter

are loaded correctly prior to using cleaner. If they

are not loaded correctly, dust will get into the motor

housing, and cause motor failure.

If the following examples occur, filter and prefilter

are not loaded correctly. Reload them correctly to

rectify problem.

Problem Examples

Example 1: Only prefilter has been loaded (no filter)

010033

Example 2: Only filter has been loaded (no prefilter)

1. Prefilter

1. Filter

Example 3: Filter has been loaded in a peeled back state

1. Filter

010028

Example 4: Prefilter's securing lip is not firmly locked into groove of cleaner housing

010036

1. Groove of

cleaner housing

2. Prefilter

3. Securing lip

OPERATION

CAUTION:

• To connect attachments, such as nozzle,

twist-insert attachment in direction of arrow to ensure secure connection during use. To disconnect attachment, twist-extract also in direction of arrow. If attachment is twisted in the opposite direction, when being connected or disconnected, capsule may become loose.

1. Capsule

010034

010017

Cleaning (Suction)

Nozzle

Attach the nozzle to clean off tables, desks, furniture, etc. Nozzle slips on easily.

1. Nozzle

Corner nozzle +Extension wand (Straight pipe)

In tight quarters where the cleaner itself cannot squeeze in, or in high places hard to reach, use this arrangement.

1. Corner nozzle

2. Extension wand

3. Cleaner body

010018

Nozzle + Extension wand (Straight pipe)

The extension wand fits in between the nozzle and the cleaner itself. This arrangement is convenient for cleaning a floor while standing erect.

010019

Corner nozzle

Fit on the corner nozzle for cleaning corners and crevices of a car or furniture.

010020

1. Cleaner body

2. Extension wand

3. Nozzle

1. Corner nozzle

2. Cleaner body

010021

Cleaning without nozzle

You can pick up powder and dust without nozzle.

010061

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off before

attempting to perform inspection or maintenance.

After use

When storing the cleaner, hang it from a nail using the convenient hanger in back.

010037

Cleaning

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or

the like. Discoloration, deformation or cracks may result.

010038

From time to time wipe off the outside (cleaner body) of the cleaner using a cloth dampened in soapy water. Clean out also the suction opening, dust bag/dust pack mounting area and the dust stopper.

Symptom Area to be investigated Fixing method

Weak suction power

Is filter clogged?

Is battery exhausted?

Not working

010051

Is battery exhausted?

NOTE:

• Do not attempt to repair cleaner by yourself.

To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.

• Extension wand (Straight pipe)

• Nozzle

• Nozzle for carpet

010009

Wash the filter in soapy water when it is clogged with dust and the cleaner power becomes small. Dry it out thoroughly before use. An insufficiently dried filter may cause poor suction and shorten the service life of the motor.

Things to Check Before Asking for Repairs

Empty dust from capsule.Is capsule full of dust?

Dust down or wash filter.

Recharge battery.

• Shelf brush

• Corner nozzle

• Round brush

• Flexible hose

• Filter

• Prefilter

• Various type of Makita genuine batteries and

chargers