Accessories
Nozzle assembly
127825-8
127827-4
127828-2
Flexible hose
Part No. 191E30-3
Round brush
Part No.
198878-4
198553-2
198555-8
Tool bag set
Part No. 199901-8
For floor/ carpet
Nozzle assembly
198525-7
(EU) 198528-1
198523-1
(EU) 198527-3
198526-5
(EU) 198529-9
Flexible hose
Part No.
198867-9
(EU) 198868-7
198541-9
(EU) 198545-1
198543-5
(EU) 198547-7
Crevice nozzle 415
Part No. 199439-3
For rug / carpet
Shelf brush
Part No.
198873-4
198538-8
198540-1
Nozzle assembly
Part No. Part No. Part No. Part No.
123486-2
123488-8
123539-7
Sash nozzle
Part No.
413770-6
413859-0
413809-5
Holder Set
Part No. 199971-7
40Vmax
mechanism
movie
For floor
Straight pipe set 340
Part No.
191D76-3
191D78-9
191D77-1
This movie was filmed
in Japan.
Models and specs may
vary by country.
Snow-white Makita-blue Black
Sheet Nozzle
199038-1
199041-2
199039-9
Long sash nozzle
Part No.
198919-6
198990-0
198992-6
Cyclone attachment set
with pipe lock
Part No.
191D71-3
191D73-9
Satisfy Professional's Needs
Cordless Cleaner
CL001G / CL002G
Quiet &
Powerful vacuuming
(LxWxH: 600x210x190mm)
CL001G only
Filter set
10pcs /set
Part No.
198914-6
CL002G only
Dust bag set
(cloth)
Part No.
198746-1
Charging Time
Pre-filter
Part No.
198750-0
Paper filter set
5pcs/set
Part No.
194566-1
High performance
dust bag set
Part No.
1910M4-5
CL002G only
Cordless Cleaner
Easy shake off filter B set
Part No.
199966-0
Valve stay complete
Part No.
143677-9
Filter H set
Part No.
199989-8
CL001G / CL002G
DC40RA
*1
BL4020 2.0Ah
*1
BL4025 2.5Ah
*1
BL4040 4.0Ah
BL4050F 5.0Ah
*1 Recommended battery
The weight does not include accessories but battery cartridge(s). The lightest and heaviest combination weight of the appliance and battery cartridge(s) are shown in the table.
Items of standard equipment and specifications may vary by country or area.
22
28 min
45
50
min
min
min
DC40RC
30
min
38
min
67
min
85
min
Electronic 4-Speed
Built-in Job Light
Standard Equipment :
CL001G: Floor Nozzle, Sash Nozzle, Sash Nozzle Holder, Pipe, Filter H, Easy Shake Off Filter, Hand Strap, Battery, Charger
CL002G: Floor Nozzle, Sash Nozzle, Sash Nozzle Holder, Pipe, Easy Shake Off Dust Bag, Dust Bag (country-specific), Hand Strap, Battery, Charger
Capacity
Continuous Use (min.)
Max Air Flow
Max Sealed Suction (water column)
Suction Power
Dimensions (L x W x H)
Net weight
CL001G: 730 mL
CL002G: Cloth dust bag: 500 mL / Paper dust bag: 330 mL
w/ BL4040, 1 / 2 / 3 / 4: 128 / 64 / 40 / 25
1.2 m³/min
21 kPa (2,100 mmHO)
w/ Easy Shake Off Filter: 1 / 2 / 3 / 4: 20 / 45 / 70 / 125 W
w/ BL4020 / BL4025:
CL001G: 1,066 x 113 x 152 mm (42 x 4-7/16 x 6")
CL002G: 1,066 x 114 x 152 mm (42 x 4-1/2 x 6")
CL001G: 1.7 - 2.9 kg (3.7 - 6t.4 lbs.)
CL002G: 1.8 - 3.0 kg (4.0 - 6.6 lbs.)
Guard
Part No.
413J77-0
Cyclone attachment
(optional accessory)
Cyclone attachment
(optional accessory)
photo: CL001G photo: CL002G
CL001G
Capsule type
CL002G
Paper dust bag
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN 202111
One-touch push
button switch
One-touch push
button switch
Quiet cleaning
Low noise
Achieved by redesigning the
exhaust air ow path of the
motor to reduce wind noise.
Using softer elastomer for the
part that xes fan cover, the
vibration of housing is reduced
[ Mode 1 ]
54dB(A)
[ Mode 4: 65 dB(A) ]
Noise absorbing sponge
LED job light
also functions as a battery
capacity warning lamp.
photo: CL001G
Pipe locking mechanism
Pipe is fixed with the
locking mechanism to
prevent it from
accidentally coming off.
Capsule type (CL001G)
Improved dust-resistance
When capsule is installed securely, two ribs inside capsule press the
inside frame of lter to hold the lter tight.
Rib for pressing filter
Valve against dust
HEPA filter is available
Pre-filter
Easy shake off
filter B set
HEPA filter
+or
Paper dust bag type (CL002G)
Improved dust-resistance
Moving stopper prevents front cover from closing if paper dust bag is
not installed tight.
4-mode suction power selection with mode
memory function
∙ The cleaner can memorize a previous
power mode and resume vacuuming
at the same mode as last time user
turned o for user convenience.
∙ Power mode can be selected before
the cleaner is turned on.
∙ Selected power mode is indicated by
4 green LEDs.
Suction
power
change
button
ON/OFF
button
Max sealed suction Continuous use
on a full battery charge
Mode
4 3 2 1
16 25 40 80
min min min min
Predecessor
Model
CL001G / CL002G
21kPa
+12.8
8.2 kPa
Battery: BL4025
Dust capacity
CL001G
CL002G
Redesigned Floor/ Carpet T-nozzle
Redesigned structure reduces the resistance caused
by suction, providing smooth running.
Redesigned inside air ow path reduces
the noise made inside the nozzle.
Cyclone attachment (option)
Centrifugal force separates fine dust,
allowing the main unit of the cleaner to
require about 80% less frequent dust
disposal.
Cyclone
pre-separation
system separates
dust from air.
Pipe with beveled end
Cleaning of tight places can be
done without nozzle by using the
beveled end of pipe as a nozzle.
Dust case
Easy disposal of the
fine dust collected in
dust case
Moving stopper
High performance dust bag set
High-performance dust bag that matches
the shape of the dust collection space of
the high vacuum model.
CL001G CL002G
Capsule type
Paper dust bag
730
mL
500
Cloth dust bag Paper dust bag
mL
330
mL
Loading...