Makita BTW200SA, BTW200SH User Manual

Page 1
22
10
12 - 2009
BTW200SA, BTW200SH
24V IMPACT WRENCH
4
7
6
5
35
36
23
24
25
37
38
39
6
40
26
11
27
12
13
15
16
28
29
30
31
32
33
34
41
56
54
53
42
43
44
45
47
48
Page 2
Item No. Type Sub Part No. Description (* see Service changes on the bottom) QtyUnit
1 322045-1 * CLIP 1 PC. 2
2
1 323675-1 * PIN 4 (ROUND HEAD) 1 PC. 2 268098-5 * PIN 4 (FLAT HEAD) 1 PC.
4 265995-6 TAPPING SCREW 4X18 9 PC. 5 256176-3 PIN 2.5 1 PC. 6 183257-9 HOUSING SET 1 SET 7 416079-5 F/R CHANGE LEVER 1 PC. 10 651994-8 SWITCH 1 PC. 11 344898-8 SUPPORT PLATE 1 PC. 12 232198-7 LEAF SPRING 1 PC. 13 417337-2 H/L CHANGE LEVER 1 PC. 15 413086-9 PLATE 1 PC. 16
2 643983-7 TERMINAL 1 PC.
22 421757-4 BUMPER 1 PC. 23 266271-1 HEX. SOCKET HEAD BOLT M5X35 4 PC. 24 151981-2 HAMMER CASE COMPLETE 1 PC. 25 267054-2 FLAT WASHER 18 1 PC. 26
2 324253-0 * ANVIL 1 PC.
27 216011-7 STEEL BALL 5.6 2 PC. 28
2 324125-9 * HAMMER 1 PC.
29 216008-6 STEEL BALL 4 25 PC. 30 267088-5 FLAT WASHER 28 1 PC. 31 233079-8 COMPRESSION SPRING 30 1 PC. 32 227005-7 SPUR GEAR 24 2 PC. 33 324030-0 SPINDLE 1 PC. 34 256033-5 PIN 6 2 PC. 35 227004-9 INTERNAL GEAR 55 1 PC. 36 267215-4 FLAT WASHER 15 1 PC. 37 211237-6 BALL BEARING 6002LLB 1 PC. 38 417336-4 INTERNAL GEAR CASE 1 PC. 39 211061-7 BALL BEARING 6000LLB 1 PC. 40 638020-0 YOKE UNIT 1 PC. 41 519063-0 ARMATURE ASS'Y 1 PC.
41
INC. Item No. 39,42
42 211021-9 BALL BEARING 607LLB 1 PC. 43 265995-6 TAPPING SCREW 4X18 2 PC. 44 643968-3 BRUSH HOLDER 1 PC. 45 643969-1 BRUSH HOLDER 1 PC. 47
47 47
1 191976-3 CARBON BRUSH CB-432 - N/L/A 1 SET 2 194435-6 CARBON BRUSH CB-441 2PC/SET (W/O ORIGIN) 1 SET 3 195022-4 CARBON BRUSH CB-441 2PC/SET (W/ ORIGIN) 1 SET
48 643941-3 BRUSH HOLDER CAP 2 PC. 53 911006-2 PAN HEAD SCREW M3X8 1 PC. 54 689070-8 HEAT SINK 1 PC. 56 819063-3 MAKITA LABEL 1 PC.
ACCESSORIES
- See catalogue or visit www.makita.ca for optional accessory -
A01 193740-8 BATTERY BH2433 SET 2 PC.
A01 193737-7 BATTERY BH2420 SET 1 PC.
A02
A02
A03
A03 A03 A03
A04 ­A05 -
1 DC24SA DC24SA BATTERY CHARGER 1 PC. 2 DC24SC DC24SC BATTERY CHARGER 1 PC. 1 824593-1 PLASTIC CARRYING CASE 1 PC.
1 INC. 417075-6 LATCH 2 PC.
2 153634-9 PLASTIC CARRYING CASE 1 PC.
2 INC. 417075-6 LATCH 2 PC.
BIT (SEE CATALOGUE) NUT SETTERS (SOCKET) (SEE CATALOGUE)
1 PC. 1 PC.
2 MODEL BTW200SA, BTW200SH
Page 3
Item No. Type Sub Part No. Description (* see Service changes on the bottom) QtyUnit
A
A06 193689-2 A07
A07 A07 A07
194485-1 FLAT PIN 4 SET 268098-5 PIN 4 (FLAT HEAD)
INC.
322045-1 CLIP
INC.
345842-8 HOOK (Not available as an individual part)
INC.
BTTRY ADPTR BAP24 F/24V TOOLS
1 PC. 1 PC. 1 PC. 1 PC. 1 PC.
SERVICE CHANGES
1. Changes on Pin 4, Clip, Anvil Item No. Description Type 1 Type 2
1 Clip 2 PIN 4 26 Anvil
323675-1 (Round head) 268098-5 (Flat head) 322276-2 (N/L/A) 324253-0
322045-1
Above parts are completely interchangeable as a set. *For easy conversion, use Flat Pin 4 Set (194485-1) (Item No. A07).
TYPE1: TYPE2: Removing way of the socket:
Simply pull the socket off.
Installing way of the socket: Push the socket onto the anvil of the tool until it locks into place.
Removing way of the socket:
Depress the detent pin through the hole in the socket and pull the socket of f the anvil.
Installing way of the socket:
lign the hole in the side of the socket with t he det ent pin on the anvil and push it onto the anvil of the tool until it locks into place. Tap it lightly if required.
2. Changes on Hammer to secure Steel Ball on Hammer. Item No. Description Type 1 Type 2
28
HAMMER
322459-4 324125-9
3 MODEL BTW200SA, BTW200SH
Loading...