Makita BTL061Z User Manual

ENGLISH

INSTRUCTION MANUAL

Cordless Angle Impact Driver

BTL060
BTL061

WARNING:

For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

1

008328

ENGLISH

SPECIFICATIONS

Model BTL060 BTL061

Capacities

No load speed (min-1) 0 - 2,000

Impacts per minute 0 - 3,000

Max. fastening torque 60 N•m

Overall length 387 mm

Net weight 1.6 kg 1.7 kg

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

Rated voltage D.C. 14.4 V D.C. 18 V

Symbols

The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.

Intended use
The tool is intended for screw driving in wood, metal and
plastic.

For Model BTL060

For European countries only
Noise

The typical A-weighted noise level determined according
to EN60745-2-2:

Vibration

The vibration total value (tri-axial vector sum)
determined according to EN60745-2-2:

･ Only for EU countries

Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.

Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)

WA

Wear ear protection

Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s

) : 9 m/s

h

Machine screw 4 mm - 8 mm

Bolt 4 mm - 12 mm

END001-1

For Model BTL061

For European countries only
Noise

The typical A-weighted noise level determined according
to EN60745-2-2:

Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)

Vibration

The vibration total value (tri-axial vector sum)
determined according to EN60745-2-2:

Work mode : impact tightening of fasteners of the
maximum capacity of the tool

ENE033-1

Vibration emission (a
Uncertainty (K) : 1.5 m/s

EC-DECLARATION OF CONFORMITY

Model; BTL060,BTL061

We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014 in accordance with Council
Directives, 2004/108/EC, 98/37/EC.

000230

Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND

) : 91 dB(A)

pA

) : 102 dB(A)

2

2

ENG102-1

ENG205-1

) : 90 dB(A)

pA

) : 101 dB(A)

WA

Wear ear protection

2

) : 11 m/s

h

2

CE2006

Tomoyasu Kato

Director

ENG102-1

ENG205-1

ENH102-6

2

GEA002-3

GENERAL SAFETY RULES

WARNING! Read all instructions. Failure to follow all

instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.

SAVE THESE INSTRUCTIONS.

Work area safety

1. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

Electrical Safety

4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.

Personal Safety

9. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while

operating power tools may result in serious
personal injury.

10. Use safety equipment. Always wear eye
protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will

reduce personal injuries.

11. Avoid accidental starting. Ensure the switch is
in the off-position before plugging in. Carrying
power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.

12. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.

13. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving
parts.

15. If devices are provided for the connection of

dust extraction and collection facilities,
ensure these are connected and properly used.

Use of these devices can reduce dust-related
hazards.

Power tool use and care

16. Do not force the power tool. Use the correct
power tool for your application. The correct

power tool will do the job better and safer at the
rate for which it was designed.

17. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.

18. Disconnect the plug from the power source

and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such

preventive safety measures reduce the risk of
starting the power tool accidentally.

19. Store idle power tools out of the reach of

children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are

dangerous in the hands of untrained users.

20. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

21. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

22. Use the power tool, accessories and tool bits

etc. in accordance with these instructions and
in the manner intended for the particular type

3

of power tool, taking into account the working
conditions and the work to be performed. Use

of the power tool for operations different from
those intended could result in a hazardous
situation.

Battery tool use and care

23. Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack

into power tools that have the switch on invites
accidents.

24. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.

25. Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.

26. When battery pack is not in use, keep it away

from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery

terminals together may cause burns or a fire.

27. Under abusive conditions, liquid may be

ejected from the battery, avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause

irritation or burns.

SERVICE

28. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power

tool is maintained.

29. Follow instruction for lubricating and

changing accessories.

30. Keep handles dry, clean and free from oil and
grease.

GEB012-2

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to impact driver safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.

1. Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will make

exposed metal parts of the tool "live" and shock
the operator.

2. Always be sure you have a firm footing.

Be sure no one is below when using the tool in
high locations.

3. Hold the tool firmly.

4. Wear ear protectors.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

IMPORTANT SAFETY
INSTRUCTIONS

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all

instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical
attention right away. It may result in loss of
your eyesight.

5. Always cover the battery terminals with the

battery cover when the battery cartridge is not
used.

6. Do not short the battery cartridge:
(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a

container with other metal objects such as
nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.
A battery short can cause a large current
flow, overheating, possible burns and

7. Do not store the tool and battery cartridge in

8. Do not incinerate the battery cartridge even if

9. Be careful not to drop or strike battery.

even a breakdown.

locations where the temperature may reach or
exceed 50 ﾟ C (122 ﾟ F).

it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

4

ENC004-1