Page 1
www.makitauk.com
A
The quickest, lightest and most powerful battery technology.
Makita presents the evolut-ion of a battery and charging system with the industry dominating
Makita Li-ion technology. The expanded range offers a comprehensive, faster, lighter, more
powerful and longer lasting selection of tough professional cordless tools.
Satisfying the professional’s needs
Lithium-ion range 2009
Tough tools for professionals
Page 2
RANGE CATALOGUE
valid from January 2009
The Makita power tool range is a blend
of tried and trusted products, together with
some valuable innovations, carefully selected
for the demanding needs of professional users.
New innovations such as Makita’s ground
breaking AVT and the innovative Lithium-ion
battery technology are just a few of the
technologies that have kept Makita the
preferred choice of the professional.
MAKITA UK LTD. Michigan Drive, Tongwell, Milton Keynes. MK15 8JD.
TEL: 01908 211678 FAX: 01908 211400 www.makitauk.com
Page 3
www.makitauk.com
1
18v SDS+ Rotary hammer drills 5
18v Combis 6
18v Drill drivers 7
18v Angle drills 8
18v Impact drivers 8
18v Angle impact driver 9
18v Impact wrenches 9
18v Auto-feed screwdrivers 10
18v Stapler 11
18v Circular saws 11
18v Metal cutting saw 12
18v 115mm Angle grinder 12
18v Reciprocating saws 13
18v Jigsaw 13
18v Portable band saw 14
18v Nibbler 14
18v Vibrating poker 14
18v Chainsaw 15
18v Blower 15
18v Cordless torch 15
18v Combi kits 16
Site radio 17
14.4v SDS+ hammer drill 18
14.4v Combis 18
14.4v Drill drivers 19
14.4v Angle drills 20
14.4v Impact drivers 21
14.4v Angle impact driver 21
14.4v Auto-feed screwdriver 22
14.4v Stapler 22
14.4v Pin nailer 23
14.4v Circular saw 23
14.4v 115mm Angle grinder 23
14.4v Jigsaw 24
14.4v Chainsaw 24
14.4v Blower 24
14.4v Cordless torch 25
10.8v Drill drivers 26
10.8v Impact driver 26
7.2v In-line drill drivers 27
7.2v In-line impact driver 27
7.2v Cordless gas nailer 28
Accessories 29
Page 4
T
T
Variable speed trigger
Electronic power control
Forward/reverse rotation
2 mechanical gears
3 mechanical gears
Electronic brake
Key-less chuck
Dust collecting
SDS plus shank
Torque settings
Torque limiter
Tool-less blade change
Orbital cutting
Job light
Carry case included
16
It is recommended that safety equipment
such as eye and ear protection is used
when operating powertools.
Makita reserve the right to change specifications
at any time owing to their policy of constant
improvement.
Accessories shown are not necessarily supplied
as standard equipment.
Subject to availability. E&OE.
All machines in this catalogue
conform to CE Marking Regulations.
Makita are a member of the
European Power Tool Association.
Customer care: 01908 211678
2
A REVOLUTIONARY
BATTERY TECHNOLOGY
Makita’s Lithium-ion tools have proved
market winners and now Makita’s
expanded range offers a comprehensive,
powerful and lightweight selection of
professional tools to complete any job.
The long-lasting Lithium-ion batteries are
40% lighter than a similar Nickel Metal
Hydride (Ni-MH) battery. Lithium-ion
batteries feature a high energy density
technology that will deliver 430% more
working capacity during the lifetime
of this battery compared to traditional
Ni-Cad batteries. Lithium-ion batteries
have an extended length of time during
which they hold their charge – even after
a long period of storage the batteries will
deliver their power.
40% LIGHTER
2000+ CYCLES
430% MORE RUN TIME
22 MINUTE CHARGE TIME
ACTIVE
Optimum Charging
System
Optimum Charging
System
<CONTROLS>
Optimum Charging
Optimum Charging
Optimum Charging
System
System
System
CURRENT▼VOLTAGE▼THERMAL
▼
ACTIVE
ACTIVE
<CONTROLS>
<CONTROLS>
▼
Page 5
www.makitauk.com
3
MORE POWER LESS WEIGHT
Lithium-ion’s weight saving
means 18 volt power can
be obtained by a battery
that weighs the same as a
12 volt Ni-MH battery. Reducing weight whilst
retaining power has obvious positive effects
on operator fatigue.
EXTENDED BATTERY LIFE
Lithium-ion batteries have greater
life spans than their Ni-MH or
Ni-Cad counterparts this is due to
the increased number of charging
cycles Lithium-ion offers and the run time
between charges.
2000+ CYCLES TESTED UNDER LOAD
Makita have obtained the cycle
life figure of 2000+ by testing the
Lithium-ion 18v 3.0Ah battery
under load. 50mm tapping screws
were screwed into standard pine, replicating
actual use conditions.
OPTIMUM CHARGING
Makita can achieve the massive
2000+ cycles from their Lithium-ion
batteries because of the Optimum
Charging System. This unique
system enables the battery and
charging system to talk to each other via a
built in CPU in the charger and CPU in the
battery. These two key elements are vital in
extending the batteries working life.
Through this two way communication
between charger and battery, the charger
can recognise the battery and recall its
charging history, analyse the batteries
condition and usage and charge the
battery accordingly.
AIR FLOW AROUND THE BATTERY
For optimum efficiency battery
cells need to be kept at a cool
temperature during charging.
To enable each cell in the battery
to be cooled the unit needs to be designed
in such a way that air flow around the battery
is maximised. Unlike some other Lithium-ion
battery types the Makita battery design
allows each cell to be kept at an optimum
temperature which extends the battery life.
Unbalanced cooling will give rise to cells
who’s capacities vary and discharge at
different rates, this can result in a battery
that has a reduced run time, cycle life
and capacity.
Makita Lithium-ion batteries have
balanced cooling = LONG LIFE.
Unbalanced cooling = SHORT LIFE.
Without cooling = SHORT LIFE.
2000
+
CYCLES
Enclosed cell
Hot
Cool
Hot
Cool
Out of air flow
Hot
Cool
Page 6
Customer care: 01908 211678
4
1 charge = 1 cycle.
Manufacturer data taken from published material.
CYCLES
CHARGING CYCLES PER BATTERY
CHARGING TIME PER BATTERY
Manufacturer data taken from published material.
0200015001000500
Makita 18V Li-ion 3.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor A 18V Li-ion 2.0Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
Run time figures are the manufacturers percentages calculated
against their own Ni-Cad batteries. Ni-Cad indexed at 100%
Manufacturer data taken from published material.
PERCENTAGE
RUN TIME OF BATTERY
0400300200100
Makita 18V Li-ion 3.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor A 18V Li-ion 2.0Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
Weight figures are the manufacturers percentages calculated
against their own Ni-Cad batteries.
Manufacturer data taken from published material.
PERCENTAGE
WEIGHT SAVING AGAINST OWN Ni-Cad BATTERY
040302010
Makita 18V Li-ion 3.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor A 18V Li-ion 2.0Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
2000+
1000
2000
1300
No published data
430%
400%
200%
300%
200%
40%
40%
35%
40%
25%
Makita 18V Li-ion 3.0Ah
Competitor B 18V Li-ion 2.6Ah
Competitor A 18V Li-ion 2.0Ah
Competitor C 18V Li-ion 3.0Ah
Competitor D 18V Li-ion 3.0Ah
22 min
30 min
60 min
45 min
60 min
COMPARISON CHARTS
Page 7
www.makitauk.com
5
18v SDS+ rotary hammer
BHR202RFE
BHR202Z*
Max. in steel 13mm
Max. in wood 26mm
Max. in concrete 20mm
Blows per minute 0-4,000bpm
Impact energy 1.93J
Vibration:
Rotary hammer 14.5m/s
2
Hammer only 11.0m/s
2
No load speed 0-1,100rpm
Net weight 3.2kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
Compact and light weight
3 mode hammer.
:: 3 mode operation:
rotary only, hammer only
and rotary hammer.
:: LED Job light with afterglow.
:: Rubberised ergonomic handle.
16
* Body only “Z” versions are supplied without battery, charger and case.
18v SDS+ rotary hammer
BHR241RFE
BHR241Z*
Max. in steel 13mm
Max. in wood 26mm
Max. in concrete 20mm
Blows per minute 0-4,000bpm
Impact energy 1.9J
Vibration:
Rotary hammer 12.5m/s
2
Hammer only 9.5m/s
2
No load speed 0-1,100rpm
Net weight 3.2kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
A light weight, powerful and
comfortable 3 mode hammer.
:: 3 mode operation:
rotary only, hammer only
and rotary hammer.
:: Rubberised ergonomic handle.
18v SDS+ rotary hammer
BHR240RFE
BHR240Z*
Max. in steel 13mm
Max. in wood 26mm
Max. in concrete 18mm
Blows per minute 0-4,000bpm
Impact energy 1.93J
Vibration:
Rotary hammer 14m/s
2
Hammer only 11.5m/s
2
No load speed 0-1,100rpm
Net weight 3.0kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
A light weight, powerful and
comfortable 3 mode hammer.
:: 3 mode operation:
rotary only, hammer only
and rotary hammer.
:: Rubberised ergonomic handle.
18 VOLT
18v
x2
18v
18v
x2
18v
18v
x2
18v
LIMITED
STOCK
Page 8
18v Combi drill 3 speed
BHP451RFE
BHP451RFE3
BHP451Z*
Max. in steel 13mm
Max. in wood 65mm
Max. in masonry 16mm
Max. torque 80Nm
Blows per 3: 0-25,500bpm
minute 2: 0-9,000bpm
1: 0-4,500bpm
No load speed 3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
Net weight 2.2kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Depth rod
Belt clip
Case
High operation efficiency
with high torque.
:: Three speed gear box
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
18 VOLT
16
GEAR BOX
METAL
18v Combi drill 2 speed
BHP452RFE
BHP452RFE3
BHP452Z*
Max. in steel 13mm
Max. in wood 38mm
Max. in masonry 13mm
Max. torque 50Nm
Blows per 2: 0-22,500bpm
minute 1: 0-6,000bpm
No load speed 2: 0-1,500rpm
1: 0-400rpm
Net weight 1.8kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Compact and light
weight for control
and maneuverability.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
16
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
6
18v
x2
18v
x3
18v
18v
x2
18v
x3
18v
18v Combi drill 2 speed
BHP453RFE
BHP453Z*
Max. in steel 13mm
Max. in wood 36mm
Max. in masonry 13mm
Max. torque 42Nm
Blows per 2: 0-19,500bpm
minute 1: 0-6,000bpm
No load speed 2: 0-1,300rpm
1: 0-400rpm
Net weight 1.9kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Compact and light
weight for control
and maneuverability.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
16
18v
x2
18v
808080
Page 9
18v Drill driver 3 speed
BDF451RFE
BDF451RFE3
Max. in steel 13mm
Max. in wood 65mm
Max. torque 80Nm
No load speed 3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
Net weight 2.1kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Belt clip
Case
High operation efficiency
with high torque.
:: Three speed gear box
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
16
GEAR BOX
METAL
GEAR BOX
METAL
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
7
18v Drill driver 2 speed
BDF452RFE
BDF452RFE3
BDF452Z
Max. in steel 13mm
Max. in wood 38mm
Max. torque 50Nm
No load speed 2: 0-1,500rpm
1:0-400rpm
Net weight 1.8kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Compact and light
weight for control
and maneuverability.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
:: LED job light with afterglow.
16
18v Drill driver 2 speed
BDF453RFE
Max. in steel 13mm
Max. in wood 36mm
Max. torque 42Nm
No load speed 2: 0-1,300rpm
1: 0-400rpm
Net weight 1.8kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
Compact and light
weight for control
and maneuverability.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
16
18vx218v
x2
18v
x3
18v
x2
18v
x3
18v
808080
Page 10
18 VOLT
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
8
18v 4 Function combi
BTP140RFE
BTP140Z*
Max. in steel 10mm
Max. in wood 21mm
Max. in masonry 8mm
Max. torque
(impact mode) 140Nm
Blows per minute:
Impact 0-3,200bpm
Percussion 0-27,600bpm
No load speed 2: 0-2,300rpm
1: 0-700rpm
Net weight 1.8kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
4 Operation modes for
ultimate versatility: Impact
driver, screwdriver, rotary
drill and percussion drill.
:: One-touch mode selection
by operating only one lever,
operation mode can be
selected from the four.
:: LED job light with afterglow.
16
14040140
18v
x2
18v
18v Impact driver
BTD140RFE
BTD140RFE3
BTD140Z*
Machine screws M4-M8
Standard bolt M5-M14
Coarse thread 22mm-125mm
High tensile bolt M5-M12
Max. torque 145Nm
Blows per minute 0-3,200bpm
No load speed 0-2,300rpm
Net weight 1.5kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
Compact with overall length
of only 146mm.
:: Weights only 1.5kg
for easy handling.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
14545
18v Angle drill
BDA350RFE
BDA350Z*
BDA351RFE
(Key-less chuck)
BDA351Z* (Key-less chuck)
Max. in steel 10mm
Max. in wood 25mm
Max. torque 13.7Nm
No load speed 0-1,800rpm
Net weight 1.6kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Chuck key (BDA350 only)
Case
Choose between two
chuck configurations
to suit your needs.
:: Compact and light weight.
:: The keyed chuck has extra
compact head height.
:: LED job light with afterglow.
BDA350 BDA351
18v
x2
18v
18v
x2
18v
18v
x2
18v
x3
18v
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
145
Page 11
18v Impact wrench
BTW251RFE
BTW251Z*
Drive shank 1/2” square
Max. torque 230Nm
Blows per minute 0-3,200bpm
No load speed 0-2,100rpm
Net weight 1.7kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
High operation efficiency
with high torque.
:: Weights only 1.7kg
for easy handling.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
:: 1/2” square drive.
230
18v Brushless Impact driver
BTD144RFE
BTD144Z*
Machine screws M4-M8
Standard bolt M5-M14
Coarse thread 22mm-125mm
High tensile bolt M5-M12
Max. torque 160Nm
Blows per minute 3: 0-3,400bpm
2: 0-2,800bpm
1: 0-1,300bpm
No load speed 3: 0-2,600rpm
2: 0-2,000rpm
1: 0-1,300rpm
Net weight 1.5kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
Maintenance free working
and more work per battery.
:: LED Job light with afterglow
and off switch.
:: Electronic speed control.
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
9
18v
x2
18v
18v Angle impact driver
BTL061RFE
BTL061Z*
Machine screws M4-M8
Standard bolt M4-M12
Coarse thread 22mm-75mm
High tensile bolt M4-M8
Max. torque 60Nm
Blows per minute 0-3,000bpm
No load speed 0-2,000rpm
Net weight 1.7kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
Compact angled head for
easy access in tight places.
:: Convenient reverse switch.
:: High comfort grips.
:: LED Job light with afterglow.
18v
x2
18v
18v
x2
18v
160
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
160
160
606060
230
230
Page 12
18 VOLT
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
10
18v Auto-feed screwdriver
BFR550RFE
BFR550Z*
Capacities:
Diameter 4mm
Length 25-55mm
No load speed 4,000rpm
Net weight 2.3kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
0000
18v Auto-feed screwdriver
BFR750RFE
BFR750RFE3
BFR750Z*
Capacities:
Diameter 4mm
Length 45-75mm
No load speed 4,000rpm
Net weight 2.3kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
0000
18v
x2
18v
x3
18v
18v
x2
18v
18v Impact wrench
BTW450RFE
BTW450Z*
Drive shank 1/2” square
Max. torque 440Nm
Blows per minute 2,200bpm
No load speed 1,600rpm
Net weight 3.4kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
High operation efficiency
with 440Nm of torque.
:: Same 440Nm of torque in
both rotational directions.
:: large protective front bumper.
:: LED Job light with afterglow.
:: Easy to operate rocker trigger.
440
18v
x2
18v
440
440
Page 13
18v Circular saw
BSS610RFE
BSS610RFE3
BSS610Z*
Max. cut @ 90° 57mm
Max. cut @ 45° 40mm
Max. cut @ 50° 36mm
Blade diameter 165mm
Bore diameter 20mm
No load speed 3,700rpm
Net weight 3.2kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Guide rule
Hex wrench
Case
Lightweight and compact.
:: Smooth and powerful cutting
at the high rotational speed
of 3,700 rpm delivered from
enhanced motor.
:: Easy to trace cutting line with
LED job light and Built-in
blow-off nozzle.
:: Rubberised ergonomic handle.
18v Circular saw
BSS611Z*
Max. cut @ 90° 57mm
Max. cut @ 45° 40mm
Max. cut @ 50° 36mm
Blade diameter 165mm
Bore diameter 20mm
No load speed 3,700rpm
Net weight 3.1kg
Battery 3.0Ah Li-ion
Standard Equipment
Saw blade
Guide rule
Hex wrench
Lightweight and compact.
:: Large lock-off lever.
:: Removable dust nozzle.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
11
18v
x2
18v
x3
18v
18v
18v Stapler
BST221RFE
BST221Z*
Capacities:
Width 10mm
Length 10, 13, 16, 19 and 22mm
Staple gauge 0.6 x 1.2mm
Magazine capacity 98 Staples
Net weight 2.3kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Goggles
Case
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
Machined aluminium
magazine for precision
and durability.
:: Single trigger switch.
:: Depth adjustment.
:: Rubberised ergonomic handle.
18v
x2
18v
Page 14
18 VOLT
Customer care: 01908 211678
12
* Body only “Z” versions are supplied without battery, charger and case.
18v Circular saw
BSS501RFE
BSS501Z*
Max. cut @ 90° 51mm
Max. cut @ 45° 35mm
Blade diameter 136mm
Bore diameter 20mm
No load speed 3,600rpm
Net weight 2.6kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Guide rule
Hex wrench
Case
Lightweight and compact.
:: Large lock-off lever.
:: Removable dust nozzle.
:: Easy to trace cutting line
with LED job light.
:: Rubberised ergonomic handle.
18v Metal cutting saw
BCS550RFE
BCS550Z*
Max. cut @ 90° 51mm
Material thickness 3mm
Blade diameter 136mm
Bore diameter 20mm
No load speed 3,600rpm
Net weight 2.4kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
TCT saw blade
Hex wrench
Safety goggles
Case
Lightweight and compact.
:: Smooth and powerful cutting
at the high rotational speed
of 3,400 rpm delivered from
enhanced motor.
:: Easy to trace cutting line
with LED job light.
:: Rubberised ergonomic handle.
mild
steel
18v
x2
18v
18v
x2
18v
18v 115mm Angle grinder
BGA452RFE
BGA452RFE3
BGA452Z*
Wheel diameter 115mm
Bore size 22mm
No load speed 10,000rpm
Net weight 1.9kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Lock nut wrench
Side handle
Abrasive wheel
Case
Powerful angle grinder now
free from the restriction of
cables and power sockets.
:: Capable of using wheels or
discs for mains Grinders.
:: Easy-to-grip, small
circumference motor housing.
:: Anti-restart function for safety
(with warning lamp).
:: Electronic current limiter
(with warning lamp).
18v
x2
18v
x3
18v
Page 15
18v Jigsaw
BJV180RFE
BJV180Z*
Max. cut in wood 135mm
Max. cut in steel 10mm
Length of stroke 26mm
Strokes per min 0-2,600spm
Net weight 2.8kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Anti splinter device
Cover plate
Dust nozzle
Case
Lightweight and compact.
:: Smooth and powerful cutting
at the high stroke speed
of 2,600 spm.
:: Easy to trace cutting line with
LED job light.
:: Rubberised ergonomic handle.
T
T
www.makitauk.com
13
* Body only “Z” versions are supplied without battery, charger and case.
18v
x2
18v
18v Reciprocating saw
BJR181RFE
BJR181RFE3
BJR181Z*
Max. cut in wood 255mm
Max. cut in pipe 130mm
Length of stroke 28mm
Strokes per min 0-2,900spm
Net weight 3.7kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Reciprocating saw blade set
Hook
Case
Extra high cutting speed with
large variable speed trigger.
:: Tool-less blade change
and Tool-less shoe
adjustment.
:: Dust preventing air flow
protects the front head
mechanism.
:: Twin LED job light
with afterglow.
T
T
18v Reciprocating saw
BJR182Z*
Max. cut in wood 255mm
Max. cut in pipe 130mm
Length of stroke 28mm
Strokes per min 0-2,900spm
Net weight 3.5kg
Battery 3.0Ah Li-ion
Standard Equipment
Reciprocating saw blade
Extra high cutting speed
model with large variable
speed trigger.
:: Tool-less blade change
and Tool-less shoe
adjustment.
:: Dust preventing air flow
protects the front head
mechanism.
:: Twin LED job light
with afterglow.
T
T
18v
x2
18v
x3
18v
18v
Page 16
Customer care: 01908 211678
14
18v Nibbler
BJS130RFE
BJS130Z*
Cutting capacity:
Mild steel 1.3mm
Stainless steel 1.0mm
Strokes per min 2,800spm
Net weight 2.3kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Belt clip
Case
Compact and light for
easy handling and high
maneuverability.
:: 360° swivelling shear head.
:: On tool storage for hex wrench.
:: Lock off button for
safe operation.
18v Vibrating poker
BVR350RFE
Vibration 13,000vpm
Shaft diameter 25mm
Shaft length 800mm
Net weight 3.2kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Case
Bi-directional switch for
more convenient use.
:: Ergonomically designed
for maximum efficiency
and minimum fatigue
in operation.
:: Enhanced protective cover.
18v
x2
18v
18v
x2
18v Portable band saw
BPB180RFE
Max. cut in pipe:
Round pipe 120mm Dia
Square pipe 120 x 120mm
Blade speed 1.4 - 2.7m/s
Net weight 6.4kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench 4mm
Carbon steel saw blade
Case
Light weight and well
balanced tool design.
:: Electronic current limiter.
:: LED Job Light with afterglow.
:: Speed Preset Dial allows
adjustment of the blade
speed to suit material or
desired finish.
18v
x2
18 VOLT
Page 17
www.makitauk.com
15
18v Chainsaw
BUC122Z*
Cutting capacity 115mm
Chain speed 5.0m/sec
Chain pitch 1/4”
Chain gauge 25AP
Net weight 2.5kg
Battery 3.0Ah Li-ion
Standard Equipment
File
Chain oil
Chain bar cover
Low fatigue trimming
and pruning, for use on
branches, saplings and
the like.
:: Tool-less chain tensioning
and blade change.
:: Rubberised ergonomic handle.
:: Automatic oiling.
T
T
18v Blower
BUB182Z*
Max air volume 2.3m
3
/min
Max air velocity 72m/sec
Max air pressure 5.4kPa
Net weight 1.7kg
R ubberised soft grip,
ergonomically designed.
:: Vacuum function.
:: Variable speed trigger.
:: 3 stage air setting dial.
18v
18v
18v Cordless torch
BML185*
BML185 Bulb Xenon
Net weight 0.36kg
Battery 3.0Ah Li-ion
not supplied
Standard Equipment
Bulb
Wrist strap
R ubberised soft grip,
ergonomically designed.
:: 4 position pivoting head with
positive stops at 0, 45, 90,
110 degrees.
:: Replacement Xenon bulb
stored in the head case.
:: With over discharge
protection circuit.
:: Falling impact strength
of 1m enough to protect
the bulb.
18v
For multi voltage lamp
(BML184) see page 25
Page 18
Customer care: 01908 211678
16
18 VOLT
18v 2pc Combi kit
LXT202
Combi drill BHP451Z
Impact driver BTD140Z
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
2 Battery cartridges
Case
18v
x2
18v 2pc Combi kit
LXT231
Combi drill BHP452Z
Jigsaw BJV180Z
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
2 Battery cartridges
Case
18v
x2
18v 4pc Combi kit
LXT425
Combi drill BHP452Z
Jigsaw BJV180Z
Angle grinder BGA452Z
Torch BML185
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
3 Battery cartridges
Case
18v
x3
Page 19
www.makitauk.com
17
18v 4pc Combi kit
LXT400
Combi drill BHP451Z
Circular saw BSS610Z
Impact driver BTD140Z
Torch BML185
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
3 Battery cartridges
Soft tool bag
18v 6pc Combi kit
LXT600
Combi drill BHP451Z
Circular saw BSS610Z
Reciprocating saw BJR181Z
Impact driver BTD140Z
Angle grinder BGA452Z
Torch BML185
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
3 Battery cartridges
Soft tool bag
* Body only “Z” versions are supplied without battery, charger and case.
18vx318v
x3
Site radio
BMR100
Frequency:
FM 87.5-108Mhz
AM 522-1629kHZ
Dimensions:
LxWxH 10 1/2" x 6 1/2" 12 1/7"
Net Weight 4.2kg
Power Supply:
AC power adaptor
DC 9.6v-24v battery
Standard Equipment
AC power adaptor
Powered by any Makita
9v-24v cluster, slide battery
or mains adaptor.
:: AUX input for an MP3 player.
:: Bumpers and metal bars
protect against rough handling.
:: Shower Proof.
18v
24v9.6v
Page 20
14.4 VOLT
14.4v Combi drill 2 speed
BHP442RFE
BHP442RFE3
BHP442Z*
Max. in steel 13mm
Max. in wood 32mm
Max. in masonry 13mm
Max. torque 44Nm
Blows per 2: 0-21,000bpm
minute 1: 0-6,000bpm
No load speed 2: 0-1,400rpm
1: 0-400rpm
Net weight 1.7kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Light weight and compact for
working in difficult areas.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
16
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
18
18v
x2
18v
x3
18v
14.4v Combi drill 3 speed
BHP441RFE
BHP441RFE3
Max. in steel 13mm
Max. in wood 50mm
Max. in masonry 14mm
Max. torque 70Nm
Blows per 3: 0-25,500bpm
minute 2: 0-9,000bpm
1: 0-4,500bpm
No load speed 3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
Net weight 2.1kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Depth rod
Belt clip
Case
High operation efficiency
with high torque.
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
GEAR BOX
METAL
16
14.4v SDS+ Hammer drill
BHR162RFE
BHR162Z*
Max. in steel 13mm
Max. in wood 24mm
Max. in concrete 16mm
Blows per minute 0-5,000bpm
Impact energy 1.2J
Vibration 12.5m/s
2
No load speed 0-1,500rpm
Net weight 2.1kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Depth rod
Case
Light weight drilling at 2.1kg.
:: Dual operation mode
"rotary only and rotary
hammer”.
:: High comfort grips.
:: Conveniently located push
button for rotation reverse.
:: LED Job light with afterglow.
:: Compact, lightweight and
effective fixings hammer.
18v
x2
18v
18v
x2
18v
x3
707070
Page 21
14.4v Drill driver 3 speed
BDF441RFE
Max. in steel 13mm
Max. in wood 50mm
Max. torque 70Nm
No load speed 3: 0-1,700rpm
2: 0-600rpm
1: 0-300rpm
Net weight 2.0kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Side handle
Belt clip
Case
High operation efficiency
with high torque.
:: Twin LED job light with afterglow.
:: Keyless heavy duty metal chuck.
14.4v Drill driver 2 speed
BDF442RFE
BDF442RFE3
Max. in steel 13mm
Max. in wood 38mm
Max. torque 44Nm
No load speed 2: 0-1,400rpm
1:0-400rpm
Net weight 1.7kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 screwdriver bits
Belt clip
Case
Light weight and compact for
working in difficult areas.
:: LED job light with afterglow.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
GEAR BOX
METAL
16 16
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
19
18v
x2
14.4v Combi drill 2 speed
BHP343RH 1.5Ah
BHP343Z*
Max. in steel 10mm
Max. in wood 25mm
Max. in masonry 10mm
Max. torque 36Nm
Blows per 2: 0-19,500bpm
minute 1: 0-6,000bpm
No load speed 2: 0-1,300rpm
1: 0-400rpm
Net weight 1.5kg
Battery 1.5Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
High operation efficiency
with high torque.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement.
16
18v
x1
18v
18v
x2
18v
x3
1.5Ah
Lithium-ion
batteries for
even more
weight saving
and 15 MIN
CHARGE
TIME
707070
Page 22
Customer care: 01908 211678
20
14.4 VOLT
14.4v 4 Function combi
BTP130RFE
BTP130Z*
Max. in steel 10mm
Max. in wood 21mm
Max. in masonry 8mm
Max. torque 135Nm
Blows per minute:
Impact 0-3,200bpm
Percussion 0-28,800bpm
No load speed 2: 0-2,400rpm
1: 0-700rpm
Net weight 1.7kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
4 Operation modes for
ultimate versatility: Impact
driver, screwdriver, rotary
drill and percussion drill.
:: One-touch mode selection
by operating only one lever,
operation mode can be
selected from the four.
:: LED job light with afterglow.
16
13535
18v
x2
18v
BDA340 BDA341
14.4v Angle drill
BDA340RFE
BDA340Z*
BDA341RFE
(Key-less chuck)
BDA341Z* (Key-less chuck)
Max. in steel 10mm
Max. in wood 25mm
No load speed 0-1,800rpm
Net weight 1.5kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Side handle
Chuck key (BDA350 only)
Case
Choose between two
chuck configurations
to suit your needs.
:: Compact and light weight.
:: The keyed chuck has extra
compact head height.
:: LED job light with afterglow.
18v
x2
18v
18v
x2
18v
14.4v Drill driver 2 speed
BDF343RH 1.5Ah
BDF343Z*
Max. in steel 10mm
Max. in wood 25mm
Max. torque 36Nm
No load speed 2: 0-1,300rpm
1: 0-400rpm
Net weight 1.4kg
Battery 1.5Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Double ended bit
Case
High operation efficiency
with high torque.
:: "Single sleeve" keyless
chuck allows for easy
one-hand bit replacement
16
18v
x1
18v
* Body only “Z” versions are supplied without battery, charger and case.
1/4”
HEX DRIVE
DIN STANDARD
1.5Ah
Lithium-ion
batteries for
even more
weight saving
and 15 MIN
CHARGE
TIME
135
Page 23
www.makitauk.com
21
14.4v Impact driver
BTD130FRFE
(blue)
BTD130FRFEW (white)
BTD130FRFER (red)
Machine screws M4-M8
Standard bolt M5-M14
Coarse thread 22mm-125mm
High tensile bolt M5-M12
Max. torque 140Nm
Blows per minute 0-3,200bpm
No load speed 0-2,400rpm
Net weight 1.4kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Belt clip
Case
Very compact with overall
length of only 146mm.
:: Weights only 1.4kg
for easy handling.
:: Phosphorescent bumper.
:: LED Job light with afterglow.
:: Available in a choice
of 3 colours.
14040140
15555
BTD130RFER BTD130RFEW BTD130RFE
18v
x2
18vx218v
x2
14.4v Brushless impact driver
BTD132RFE
BTD132ZZ*
Machine screws M4-M8
Standard bolt M5-M14
Coarse thread 22mm-125mm
High tensile bolt M5-M12
Max. torque 155Nm
Blows per minute
High 0-3,200bpm
Medium 0-2,600bpm
Low 0-1,100bpm
No load speed
High 0-2,400rpm
Medium 0-1,800rpm
Low 0-1,100rpm
Net weight 1.3kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
Very compact with overall
length of only 155mm.
:: LED Job light with afterglow
and off switch.
:: Electronic speed control
Spark and maintenance free
working due to the elimination
of carbon brushes with the
introduction of a controller
unit and sensors. This also
means more work per battery
when compared to a brush
type motor.
Control panel
:: 3 stage speed control
:: Indicator lights
:: Job light on/off
18v
x2
18v
Permanent magnet
Controller
Windings
* Body only “Z” versions are supplied without battery, charger and case.
†
Maintenance free: until the service life of ball bearings is over.
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
155
Page 24
14.4 VOLT
14.4v Stapler
BST110RFE
BST110Z*
Capacities:
Width 10mm
Length 7 and 10mm
Magazine capacity 125 staples
Net weight 1.9kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Goggles
Case
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
:: Double trigger for
enhanced safety.
:: Rubberised ergonomic handle.
14.4v Autofeed screwdriver
BFR540RFE
BFR540RFE3
BFR540Z*
Capacities:
Diameter 4mm
Length 25-55mm
No load speed 4,000rpm
Net weight 2.1kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Phillips bit
Belt clip
Case
High operation efficiency
delivered from high
rotational speed and
improved screw strip
management.
:: Improved casing.
:: Anti tilt device prevents the
screw from swaying.
:: Dust proof construction.
:: New silent clutch.
:: Foldable screw guide keeps
screw strips free from tangle.
0000
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
22
18v
x2
18v
x3
18v
18v
x2
18v
14.4v Angle impact driver
BTL060RFE
BTL060Z*
Machine screws M4-M8
Standard bolt M4-M12
Coarse thread 22mm-75mm
High tensile bolt M4-M8
Max. torque 60Nm
Blows per minute 0-3,000bpm
No load speed 0-2,000rpm
Net weight 1.6kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 Phillips bits
Belt clip
Case
Compact angled head for
easy access in tight places.
:: Convenient reverse switch.
:: High comfort grips.
:: LED Job light with afterglow.
18v
x2
18v
1/4”
HEX DRIVE
DIN STANDARD
606060
Page 25
14.4v Stapler
BST220Z*
Capacities:
Width 10mm
Length 10, 13, 16, 19 and 22mm
Staple gauge 0.6 x 1.2mm
Magazine capacity 98 staples
Net weight 2.3kg
Battery 3.0Ah Li-ion
Standard Equipment
Belt clip
Goggles
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
Machined aluminium
magazine for precision
and durability.
:: Single trigger switch.
:: Depth adjustment.
:: Rubberised ergonomic handle.
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
23
14.4v Circular saw
BSS500RFE
BSS500Z*
Max. cut @ 90° 51mm
Max. cut @ 45° 35mm
Blade diameter 136mm
Bore diameter 20mm
No load speed 3,600rpm
Net weight 2.5kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Saw blade
Guide rule
Dust nozzle
Hex wrench
Case
Lightweight and compact.
:: Large lock-off lever.
:: Removable dust nozzle.
:: Easy to trace cutting line
with LED job light.
:: Rubberised ergonomic handle.
18v
14.4v Pin nailer
BPT350RFE
BPT350Z*
Capacities:
Diameter 0.6mm
Length 18, 25, 30 and 35mm
Nail gauge 23swg
Magazine capacity 110 nails
Net weight 2.0kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Case
Hose-less operation,
enabling efficient interior
finishing work free from
a large compressor.
:: LED job light.
:: Double trigger for
enhanced safety.
:: Depth adjustment.
:: Anti-dry-fire mechanism
locks trigger when 3 or less
nails remain in the magazine.
:: Rubberised ergonomic handle.
18v
x2
18v
18v
x2
18v
Page 26
14.4 VOLT
* Body only “Z” versions are supplied without battery, charger and case.
Customer care: 01908 211678
24
14.4v Chainsaw
BUC121Z*
Cutting capacity 115mm
Chain speed 4.8m/sec
Chain pitch 1/4”
Chain gauge 25AP
Net weight 2.4kg
Battery 3.0Ah Li-ion
Standard Equipment
File
Chain oil
Chain bar cover
Low fatigue trimming
and pruning, for use on
branches, saplings and
the like.
:: Tool-less chain tensioning
and blade change.
:: Rubberised ergonomic handle.
:: Automatic oiling.
T
T
18v
14.4v Jigsaw
BJV140RFE
BJV140Z*
Max. cut in wood 135mm
Max. cut in steel 10mm
Length of stroke 26mm
Strokes per min 0-2,600spm
Net weight 2.7kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Anti splinter device
Cover plate
Dust nozzle
Case
Lightweight and compact.
:: Smooth and powerful cutting
at the high stroke speed
of 2,600 spm.
:: Easy to trace cutting line with
LED job light.
:: Rubberised ergonomic handle.
T
T
18v
x2
18v
14.4v 115mm Angle grinder
BGA450RFE
BGA450Z*
Wheel diameter 115mm
Bore size 22mm
No load speed 10,000rpm
Net weight 1.8kg
Battery 3.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Lock nut wrench
Side handle
Abrasive wheel
Case
Powerful angle grinder now
free from the restriction of
cables and power sockets.
:: Capable of using wheels or
discs for mains Grinders.
:: Easy-to-grip, small
circumference motor housing.
:: Anti-restart function for safety
(with warning lamp).
:: Electronic current limiter
(with warning lamp).
18v
x2
18v
Page 27
* Body only “Z” versions are supplied without battery, charger and case.
www.makitauk.com
25
18v/14.4v Cordless lamp/torch
BML184*
Bulb Fluorescent
Net weight 0.4kg
Battery 3.0Ah Li-ion
not supplied
Standard Equipment
Bulb
Shoulder strap
Hook
R ubberised soft grip,
ergonomically designed.
:: Dual voltage, both 18v and
14.4v lithium-ion batteries
can be used with this lamp.
14.4v Cordless torch
BML145*
BML145 Bulb Krypton
Net weight 0.36kg
Battery 3.0Ah Li-ion
not supplied
Standard Equipment
Bulb
Wrist strap
R ubberised soft grip,
ergonomically designed.
:: 4 position pivoting head with
positive stops at 0, 45, 90,
110 degrees.
:: Replacement Xenon bulb
stored in the head case.
:: With over discharge
protection circuit.
:: Falling impact strength
of 1m enough to protect
the bulb.
18v
18v
14.4v Blower
BUB142Z*
Max air volume 2.3m
3
/min
Max air velocity 68m/sec
Max air pressure 5.4kPa
Net weight 1.6kg
R ubberised soft grip,
ergonomically designed.
:: Vacuum function.
:: Variable speed trigger.
:: 3 stage air setting dial.
18v
Page 28
Customer care: 01908 211678
26
10.8 VOLT
10.8v Drill driver
DF030WE
Max. in steel 10mm
Max. in wood 21mm
Max. torque 24Nm
Torque settings 18 plus drill mode
No load speed 2: 0-1,300rpm
1: 0-350rpm
Net weight 0.88kg
Battery 1.3Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Half size drill driver which
is light and great for
tight spaces.
:: LED job light.
:: Ideal for applications
in tight spaces.
:: Hex shank chuck for easy
one handed release.
:: Reversing switch.
18v
x2
10.8v Drill driver
DF330WE
Max. in steel 10mm
Max. in wood 21mm
Max. torque 24Nm
Torque settings 18 plus drill mode
No load speed 2: 0-1,300rpm
1: 0-350rpm
Net weight 1.0kg
Battery 1.3Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Tiny and powerful three jaw
chuck drill driver.
:: LED job light.
:: Ideal for applications
in tight spaces.
:: 3 jaw chuck, ideal for use with
your existing accessories.
:: Reversing switch.
18v
x2
10.8v Impact driver
TD090WE
Machine screws M4-M8
Standard bolt M5-M12
Coarse thread 22mm-90mm
High tensile bolt M5-M10
Max. torque 90Nm
Blows per minute 0-3,000bpm
No load speed 0-2,400rpm
Net weight 0.92kg
Battery 1.3Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Screw driver bit
Case
Small and powerful
impact driver.
:: LED job light.
:: Impact driver action delivers
90Nm torque.
:: Minimal pressure required
from the operator.
:: Reversing switch.
18v
x2
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
909090
Page 29
www.makitauk.com
27
7.2 VOLT
7.2v Screwdriver
DF011DS
Max. torque 4.5Nm
No load speed 220rpm
Net weight 0.41kg
Battery 1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 x Phillips bits
Case
Versatile drill driver for
those hard to get places.
:: LED job light.
:: Use in in-line or pistol mode.
:: Soft start trigger.
:: Reversing switch.
7.2v Drill driver
DF010DSE
Max. in steel 5mm
Max. in wood 6mm
Max. torque 5.6Nm
Torque settings 21 plus drill mode
No load speed 2: 650rpm
1: 200rpm
Net weight 0.55kg
Battery 1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
2 x Phillips bits
Case
Versatile drill driver for
those hard to get places.
:: LED job light
with on/off switch.
:: Use in in-line or pistol mode.
:: Soft start trigger.
:: Reversing switch.
18vx218v
x2
7.2v Impact driver
TD020DSE
Machine screws M3-M8
Standard bolt M3-M8
Coarse thread 22mm-45mm
High tensile bolt M3-M6
Max. torque 20Nm
Blows per minute 3,000bpm
No load speed 2,300rpm
Net weight 0.53kg
Battery 1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Holster
6 impact driver bit set
Magnetic bit holder
Clear screw guide inc. Pozi 2 bit
Soft case
Versatile impact driver for
those hard to get places.
:: LED job light
with on/off switch.
:: Use in in-line or pistol mode.
:: Impact driver action delivers
20Nm torque.
:: Minimal pressure required
from the operator.
:: Reversing switch.
18v
x2
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
1/4”
HEX DRIVE
DIN STANDARD
202020
Page 30
Customer care: 01908 211678
28
7.2 VOLT
The new first fix cordless gas
nailer designed for the demands
of the professional.
Suitable for timber frames, roofing
joists and a host of other applications
Makita now have a better solution
with this portable machine.
7.2v Cordless gas nailer
GN900SE
Nail type Clipped head
Max length 50-90mm
Gauge 2.9-3.3mm
Magazine capacity 44
Magazine angle 34º
Shots per battery 4,000
Shots per fuel cell 1,200
Net weight 3.5kg
Battery 1.0Ah Li-ion
Standard Equipment
Fast charger
Battery cartridges
Hex wrench
Case
No leads, no hoses,
just fast versatile power.
:: 30 minute charge time,
4 times quicker than the
leading competitor.
:: The only gas nailer with
Lithium-ion battery technology.
:: Shock absorbing battery fitting
to protect the terminals.
:: LED low battery and error
detection system.
18v
x2
30 minute
charge time
The only gas nailer with
Lithium-ion battery technology
Page 31
www.makitauk.com
29
ACCESSORIES
*To charge stick, Ni-Cad and Ni-MH type batteries the 193947-6 adaptor will be required.
Batteries
194204-5 18V 3.0 Ah Li-ion battery cartridge 18V Li-ion machines
194065-3 14.4V 3.0 Ah Li-ion battery cartridge 14.4V Li-ion machines
194558-0 14.4V 1.5 Ah Li-ion battery cartridge 14.4V Li-ion machines
194550-6 10.8V 1.3 Ah Li-ion battery cartridge 10.8V Li-ion machines
194355-4 7.2V 1.0 Ah Li-ion battery cartridge 7.2V Li-ion machines
Chargers
DC18RA 240V Li-ion quick charger, 22 minute charge time 18V and 14.4V Li-ion batteries*
DC18RA/1 110V Li-ion quick charger, 22 minute charge time 18V and 14.4V Li-ion batteries*
DC18SE Automotive charger 12-24V input, 22 minute charge time 18V and 14.4V Li-ion batteries*
DC10WA 240V Li-ion 10.8V charger, 50 minute charge time 10.8V Li-ion batteries
DC07SA 240V Li-ion 7.2V charger, 30 minute charge time 7.2V Li-ion batteries
PART NUMBER DESCRIPTION TOOL MODEL NUMBER
Batteries and chargers
Impact drivers
194281-7 Adjustable locator set with Ph2 BTD140, BTD142, BTD130,
use to control the depth of the screw head BTD132, BTP140, BTP130
194250-8 Keyless chuck sutable for impact drivers BTD140, BTD142, BTD130,
with ¼” hex fitting BTD132, BTP140, BTP130
Autofeed screwdrivers
194500-1 Extention handles BFR540, BFR550, BFR750
Chain saws
158476-6 Replacement guide bar BUC121,BUC122
P-19928 Replacement chain BUC121,BUC122
194524-7 Pruning extention BUC121
194523-9 Pruning extention BUC122
Torch/lamp
A-30542 Replacament bulb set BML185
A-83973 Replacament bulb set BML145
B-07303 Replacament bulb set BML184
SM00000050 Replacament florescent tube BML184
Battery
194649-7 Battery protector 18V and 14.4V
Li-ion batteries
BL1830 and BL1430
PART NUMBER DESCRIPTION TOOL MODEL NUMBER
Accessories
made for the best
MAKITA ACCESSORIES
Page 32
Satisfying the professional’s needs
98N300 0109
Makita UK
Michigan Drive, Tongwell, Milton Keynes, Buckinghamshire MK15 8JD
T: 01908 211678 F: 01908 211400
www.makitauk.com
Dealer stamp
Every Makita Tool is thoroughly inspected
and tested before leaving the factory and is
guaranteed to be free of defects from
workmanship and materials for the period of
ONE YEAR from the date of original
purchase. Should any trouble develop during
this one year period, return the COMPLETE tool, freight
prepaid, to EITHER an Authorised Makita Service Agent OR
to Makita (UK) Ltd. If inspection shows the trouble is caused
by defective workmanship or material, Makita will repair
WITHOUT CHARGE.
This guarantee does not apply where:
• Repairs have been made or attempted by others.
• Repairs are required because of normal wear and tear.
• The tool has been abused, misused or improperly
maintained.
• Alterations have been made to the tool.
• This guarantee does not affect your statutory rights.
WARNING: COUNTERFEIT TOOLS
Many fake Makita Tools are being offered for sale.
Don’t fall for the short term saving, they are low quality,
without warranty, and have a minimal professional life.
Buy only genuine Makita Tools through a reputable dealer.
Loading...