
Not included
in the package
Use the mast bracket (n) to fix the antenna on the boatOption 2. mount ot included in the package(Fig.2)
POWER SUPPLY CONNECTION
Power
insert
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Fig. 4
Not included
in the package
TV
DC 12V
+ -
Powered from
DC battery
Power
insert
Connect the “F” male connector of the coaxial cable to the “F” female connector of the antenna, and wear the rubber
boot to the end of the connected “F” connector. (Fig.3)
Fig.3
F-type connector
linking bolt
Coaxial-cable
Water-proof kit
COAX TV CABLE CONNECTION
O
360 OMNI DIRECTION TV SIGNAL reception
Operation Instruction:
Note: For the best reception, please check the following conditions
1. Keep the antenna away from the sources of interference: keep the antenna away from
those big power consumption devices, such as air conditioner, elevator, hair dryer and
microwave oven...etc.
2. Install the antenna as high as possible: in digital terrestrial reception, if there are some
interceptions between antenna and transmission tower, it will cause the signal loss
temporarily. So if the antenna is installed as high as possible, those interceptions will be
reduced.
Fig. 5
Not included
in the package
Fig.2
Option 1: Power from AC/DC power adapter.(Fig.4)
1.Connect the cable from Antenna to power insert input.
2.Connect the output connector of the power to
insert
DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V DC jack
/24V
on the power supply unit, and plug the adapter into the
power socket.
Option 2: Power from DC battery.
1.Connect the cable from Antenna to power input.
2.Connect the output connector of the power o DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V DC jack on the power .
(Fig.5)
insert
insert t
/24V insert
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan
before watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a
channel. Now you can enjoy the TV program after you finish running a channel scan.