Magnavox MDR700 User Manual

What’s in the box

POWER

SUBTITLE

AUDIO

EJECT

DVD

TV

AV

1 2

3

4 5 6

7 8 9

+10 0

FM/AM

TV/LCD SETUP

DVD SETUP

GOTO

INFO

SET

OK

CH-

CH+

VOL

+

-

TIME

REPEAT

A-B

SLOW

ZOOM

RC 518B

SEEK

16:9/4:3

MENU TITLE

+

-

LCD
ON/OFF

LCD
ON/OFF

MUTE

C

R

2

0

2

5

L

I

T

H

I

U

M

DVD Kitchen Radio with MDR700
TFT Display

Quick Start Guide

Preparation

Connect it

Mount it

Use it

This Guideshows you:

• basic installation setup

• how to install your unit

• how to play a DVD

• how you can watch TV on

the unit

For detailed operation of all the features,please also read the

User manual.

4

3

2

1

FM ANT INPUTVIDEO IN AUDIO IN

Mount it

Ask a friend to help out.An extra hand to hold the unit makes mounting easier
and quicker.

A

•

Cut the template to fit inside the cabinet.

•Align the template border marked "FRONT"

along the front edge of your cabinet.

•Use adhesive tape to fix the template.

•Drill 1/4 inch holes, as marked X on the tem-

plate.

•Remove the template when you finish drilling.

B

Using the spacers

On the spacers,there are 4 pairs of notch length
options.Depending on the thickness of you cabi­net bottom (with/ without an overhang),these
notch lengths correspond to the 4 notch height in
the space holders,and allow you to adjust to the

best height to help you mount the unit.

•Measure the height of the cabinet bottom

and/overhang.

•Tu rn the spacer counterclockwise to determine

which of the 4 heights is most suitable:Low •

• High.Align to the arrow indication.

•Insert the spacer s accordingly.

C

•

Manuallyfasten the 4screws down into

the spacer holder holes to mount your
set.Start screwing at opposite corners of
the unit for better support.

Tip

To prevent damage to your set,do not use an

electric drill to secure screws when mounting!

– If the overhang is more than 1 1/4 inch,use longer screws
(not included).

Template

A

Spacer

L (Low)

L••H (4 heights)

Arrow

B

C

Mounting
Screw

Tip

– Clean the bottom of the cabinet surface and also empty your cabinet
before mounting.
– Place the unit in a clean,safe place when drilling to avoid wood
shavings dropping into the ventilation slots.
– Use a nail to start each drill hole.
– Drill from the bottom upwards if you do not have enough room inside
the cabinet.

– Hold your drill firmly at 90owith the cabinet bottom and drill holes at
low speed.
– Clear wood shavings.

FRONT

1

SMART. VERY SMART.

User guide

DVD Kitchen Radio
with TFT Display

MDR700

Need help? Call us!

Magnavox representatives are ready to help you with
any questions about your new product. We can guide
you through Connections, First-time Setup, or any of
the Features.We want you to start enjoying your
new product right away!

CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!

1-800-705-2000

or

Visit us on the web at www.magnavox.com

a

Template

b

VIDEO (Yellow)

AUDIO-R (Red)

AUDIO-L (White)

FM AM DC

75ohm coaxial
cable

DVD Kitchen Radio with MDR700
TFT Display

Quick Start Guide

1

Preparation

2

Connect it

3

Mount it

4

Use it

This Guide shows you:

• basic installation setup

• how to install your unit

• how to play a DVD

• how you can watch TV on

the unit

DVD Kitchen Radio

with TFT Display

Remote control

with one CR2025

16 x spacers

lithium battery

Quick start guide

Mounting

User manual

template

12 x screws 12V DC adaptor AM antenna

For detailed operation of all the features, please also read the

User manual.

What else you'll need

These tools (not included) will help you mount the unit as described in part 3 Mount it, and on the
template.

Electric drill

Ta pe measure

Scissors

FM antenna AV cable

Preparation

1

a Find a mounting location near a wall outlet.

b Use the mounting template to test the design and

thickness of your kitchen cabinet bottom.

c Decide whether you want to connect the unit with

other AV signal sources. ( See B below)

For best performance, install the unit as far as
possible from sources of noise and interference
(e.g. fridges, microwaves, fluorescent lamps)

2

To r educe the risk of fire,

do not place any heating or
cooking apparatus beneath
this unit.

W

Sellotape

Screwdriver

Safety goggles

Printed in China JS/JW-0502

Connect it

2

A

Connect the following supplied acces­sories to the respective jacks on the rear
of the unit:

• 12V DC power adaptor

• For radio reception, connect the

AM and FM antennas.

B

Other connections (cables not included)

• For TV reception on the unit, con-

nect a VHF/UHF cable.

• For use with other AV signal

sources, connect the composite cable and match
the colors of the cinches (Audio L/R, Video

in) on the unit.

Mount it

POWER

SUBTITLE

AUDIO

EJECT

DVD

TV

AV

1 2

3

4

5

6

7 8 9

+10 0

FM/AM

TV/LCD SETUP

DVD SETUP

GOTO

INFO

OK

CH+

16:9/4:3

POWER

SUBTITLE

AUDIO

EJECT

DVD

TV

AV

1 2

3

4

5

6

7 8 9

+10 0

FM/AM

TV/LCD SETUP

DVD SETUP

GOTO

INFO

SET

OK

CH-

CH+

TIME

SEEK

16:9/4:3

+

-

LCD
ON/OFF

LCD
ON/OFF

MUTE

AM

270 maximum

115

Template

A

B

C

Mounting
Screw

3

A

•

Cut the template to fit inside the cabinet.

• Align the template border marked "FRONT" along

the front edge of your cabinet.

• Use adhesive tape to fix the template.

• Drill 1/4 inch holes, as marked on the template.

• Remove the template when you finish drilling.

Ask a friend to help out.An extra hand to hold the unit makes mounting easier and
quicker.

B

Using the spacers

A total of 16 spacers are supplied. Depending on the
thickness of your cabinet bottom (with or without an
overhang), you can select 4 spacers of the best length to
mount the set.

• Measure the height of the cabinet bottom and/or

overhang.

• Select 4 spacers of the optimum length.

• Inser t the spacers accordingly.

C

• Manually fasten 4 long screws (selected according to

actual situation) down into the spacer holder holes to
mount your set. Start screwing at opposite corners of

the unit for better support.

Tip

– Clean the bottom of the cabinet surface and also empty your cabinet

before mounting.

– Place the unit in a clean, safe place when drilling to avoid wood shav-

ings dropping into the ventilation slots.
– Use a nail to start each drill hole.
– Drill from the bottom upwards if you do not have enough room inside

the cabinet.

– Hold your drill firmly at 90owith the cabinet bottom and drill holes at

low speed.
– Clear wood shavings.

Use it

4

A

Power supply

• Connect the power plug to the wall outlet.

• Press POWER to switch on.

B

Using the LCD screen

For full details, please read and follow the instructions inside the User manual.

Tip

To prevent damage to your set, do not use an

electric drill to secure screws when mounting!

D

How to watch TV on the unit

• Ensure normal TV antenna and power cord connection.

• Switch on the system.

• Press TV on the remote control or SOURCE on the

front panel to switch to the TV mode.

• Enter TV SETUP.

• Press 3 / 4 to select Fine Tuning or Auto Memory to

store channels.

• After exiting TV SETUP, press 3 / 4 on the remote

control to select the desired channel, or use the
Numeric Keypad (0-9) for input and then press OK
for confirmation if necessary.

• Pull out the LCD screen under the unit and swivel round as shown.

• To store away, swivel and tuck. Push back until you hear a click.

Tip

– Swivel with care to avoid breakage. Screen rotates a

0

maximum 270

C

How to play a DVD /CD

• Select DVD source.

• Inser t a DVD/CD.

• Press PLAY/PAUSE

only.

2;

to start disc playback.

Insert DVD/CD

E

Improve radio reception

FM: place the antenna as far as possible from the AC adaptor
to avoid interference.

AM: always mount the antenna vertically.