Magnavox CDI450 Owner’s Manual

MAGNAvOx

I I I I I I I I II II I I III II I I

CDI450 / CDI550

I I I I II II I I I I IIII I II I I I II I I I I I II II III II I II II I II II

I II I I I I I I I II I I _ I I I I _

I I r i ii i

i i rl q rr r r rrrl I i r rrrrlrrl [[ 1lit rrr rl_ [ fir rrrr rrrrlr r

Operating Instructions

MAGNAVOX

It,El URN YOUR OWNERIN

REGISTRATION CARD WITHIN

lo DAYS.

_DO,_ MAIL

Registering your purchase is an essential
step to guarantee that you'll receive all
of the benefits you're entitled to as a
MAGNAVOX product owner. Complete
and mail your Owner's Registration
Card today to ensure your right to war-

ranty verification, owner confirmation,
model registration, plus a wide variety

of special services and savings.

KNOW THESE SAFETY

SYMBOLS.

RISK ( I I 1 )l" IRI( >)1_ L K I

( \L ill )N I L) R} I)ULI ]l II RISK OF l!l.liL IRI( SI RKK, t)_ ) NO I

REMOVE COVER (OR BACK) NO USER-SERVI( I ABLE PARTS

INSIDE. REFER SERVI(71NG TO QUAL[FIED SERVICE PERSONNEL.

in your household, please do not remove
product covering.

x NL o N I

This "bolt of lightning" indicates

uninsulated material within your

unit may cause an electrical

shock. For the safety of everyone

Congratulations On Your New

Purchase ... And Welcome To

The MAGNAVOX Family!

Dear MAGNAVOX Family Member:

Thank you for your confidence in MAGNAVOX.
You've selected one of the best-built, best-backed

products available today.

We appreciate your support, and we'll do every-
thing we can do to keep you happy with your
purchase for many years to come. After all, you're

the reason we're in business!

As a MAGNAVOX family member, you're entitled
to a world of special privileges - and our uncom-

promising commitment to your total satisfaction.
Your MAGNAVOX product is protected by one of

the most comprehensive warranties and
outstanding service networks in the industry.

What's more, your purchase qualifies you to
receive advance information on exciting new
products from MAGNAVOX, convenient access to
our home shopping network for special products
and accessories, plus factory-direct rebates and
discounts on your future MAGNAVOX purchases.

All of this is our way of saying "thanks" for

joining the MAGNAVOX family.

A he "exclamation point" calls

erature closely to prevent operating and
maintenance problems.

attention to features for which
you should read the enclosed lit-

READ OPERATING

INSTRUCTIONS CAREFULLY.

IT

The information in this manual can
help you take full advantage of your

product's many features, and ensure
years of safe, reliable operation. So

don't miss out. Read the enclosed
instructions, safety tips and warranty

in-formation today.

To start taking advantage of these great benefits,

just remember to return your MAGNAVOX

Owner's Registration Card.

Simply complete, detach and mail us your
Owner's Registration Card today. And enjoy your
new purchase with our best wishes!

Sincerely,

Donald F Johnstone __'

President and Chief Executive Officer

For Customer Use:

Enter below the Serial No. which is lo-
cated on the rear of the cabinet. Retain

this information for future reference.
Model No.: CDI450 / CDI550

Serial No.:

Safety Precautions

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR

MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

LASER SAFETY: This unit employs a laser. Only a

qualified service person should remove the cover or
attempt to service this device, due to possible eye injury.

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS
B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL

APPARATUS AS SET OUT IN THE RADIO INTERFERENCE
REGULATIONS OF THE CANADIAN DEPARTMENT OF
COMMUNICATIONS.

ATTENTION: POUR EVITER LES CHOCS t_LEC-
TRIQUE, INTRODUIRE LA LAME LA PLUS LARGE

DE LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU'AU FOND.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE.

CLASS 1

LASER PRODUCT

CET APPAREIL NUMI_RIQUE N'I_MET PAS DE BRUITS
RADIOI_LECTRIQUES D]_PASSANT LES LIMITES

APPLICABLES DANS LA RI_GLEMENT SUR LE BROUILLAGE
RADIOt_LECTRIQUES ]_DICTE PAR LE MINISTI_RE DES

COMMUNICATIONS DU CANADA.

WARNING:

This device complies with Part 15 of the FCC (U.S.A.) Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation! This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT:

This product was FCC verified under test conditions that included use of shielded cables and connectors between
system components. It is important that you use shielded cables to reduce the possibility of causing interference to

radios, television sets, and other electronic devices. If you have any problems, contact your dealer.

Any change or modifications to the equipment by the user not expressly approved by the grantee or manufacturer
could void the user's authority to operate such equipment.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.

IMPORTANT SAFETY INSTRUCTIONS

l.Read Instructions - All the satety and operating instructions should be

read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be
retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be
followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Exception: A product that is meant for uninterrupted service and that for
some specific reason, such as the possibility of the loss of an authorization

code for a CATV converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in item 5.

6. Attachments - Do not use attachments not recommended by the video
product manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this video product near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool, and the like.

8. Accessories - Do not place this video product on an unstable cart, stand,
tripod, bracket, or table. The video product may fall, causing serious injury

to a child or adult, and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer, or

sold with the video product. Any mounting of the appliance should follow
the manufacturer's instructions, and should use a mounting accessory

recommended by the manufacturer.

8A.

9. Ventilation - Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the video product and to protect it from

overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the video product on a bed,

sofa, rug, or other similar surface. This video product should never be
placed near or over a radiator or heat register. This video product should
not be placed in a built-in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer's instructions have been
adhered to.

An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.

10. Power Sources - This video product should be Ol_'_ed only from the
type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or
local power company. For video products intended to operate front battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is equipped with a
polarized alternating-current line plug (a plug having one blade

only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.

wider than the other). This plug will fit into the power outlet in

12. Power-Cord Protection - Power-Supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.

13. Protective Attachment Plug - The appliance is equipped with an

attachment plug with overload protection. This is a safety feature.
See Instruction Manual for replacement or resetting of protective device. If

replacement of the plug is required, be sure the service technician has used a
replacement plug specified by the manufacturer that has the same overload

protection as the original plug.

information with regard to proper grounding ot the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size ol

grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode. See

Fig.A.

F1

g _.._....f_ _iii'_'

' (N EC SECTION 810 20)

_LA NTENN

"_'_ POWER SERVICE GROUNDING

NEC - NATIONAL ELECTRICAL CODE {NEC ART 250, PART H)

15. Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it front the wall outlet and disconnect the antenna or cable system.

This will prevent damage to the product due to lightning and powerline
surges.

16. Power lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.

17. Overloading - Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.

18. Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.

19. Servicing - Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.

20. Damage Requiring Service - Unplug this product front the wall outlet
and refer servicing to qualified service personnel under the following

conditions
a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the ope-
rating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified

technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance -

this indicates a need for service.

21. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufactu-

rer or which have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.

22. Safety Check - Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the

product is in proper operating condition.

23. Carts and Stands - The appliance should be used only with a cart or
stand that is recommended by the manufacturer.

DISCHARGE UNII

GROUNDING CONDUCTORS

(NEC SECTION 810-20)

MPS

ELECTRODE SYSTEM

24.Heat - Theproduct should be situated away from heat sources such as

radiators, heat registers, stoves, or other products that produce heat.

14. Outdoor Antenna Grounding - If an outside antenna or cable system is
connected to the video product, be sure the antenna or cable system is

grounded so as to provide some protection against voltage surges and
built-up static charges.

Section 810 of the National Electrical Code, ANSI/NFPA 70, provides

LIMITED WARRANTY

CD-I

• One (1) Year Free Labor • One (1) Year Free Parts Service

• This CD-I must be shipped in for warranty service.

Please keep...

...your sales receipt and other material proving proof-of-

purchase. Attach it to this owner's manual and keep it nearby.

Please also keep the original box and packing material should

you ever need to ship your CD-I player to Philips for service.

One (1) Year Coverage...

...starts from the date you bought your product. Both parts

and labor are covered at no cost to you. Any defective part

will be repaired or replaced. Any part is covered only for the
original warranty period. Once the one (1) year warranty on

the product has expired, the warranty on any replaced or
repaired part also expires. Service for your CD-I is provided by

shipping it to the Philips Factory Service Center (listed to the
right) which specializes in this type of product.

After one year, you must pay for all labor, parts,
transportation, and service charges.

Who is Protected? ... Where?

Only the person who has proof-of-purchase will receive
warranty service. This service will be provided to any product
bought and used in the U.S.A., Puerto Rico, the Virgin Islands

and Canada. If you move within these areas you must ship
your monitor to the designated Philips Factory Service Center

listed in this warranty.

Before Calling for Service...

...please check your owner's manual. A check of tile controls
discussed there may save you a service call.

How To Get Warranty Service

Due to the sophisticated nature of this product, warranty

service will be provided by the Philips Personal Information

Products Answer Center. If you feel you require warranty
service for or need to discuss a problem about your CD-I,
please contact the Philips Personal Information Products

Answer Center at [phone]. There, a technician will go
through a diagnostic check list with you and if it is determined

the unit needs to be repaired, you will be given a return
authorization number. Carefully pack the CD-I in secure

packaging for safe shipment. It is recommended that you retain
the carton and all packing materials from this unit. These
materials are specifically designed and manufactured for

shipping this product. Deliver or ship it freight prepaid and
insured to the Philips Factory Service Center listed, with

evidence of the purchase date and description of the problem.
Following warranty repair, the unit will be returned to you

freight prepaid. Be sure you include your complete return
address on the outside of the carton.

Warranty Exclusions -

Your Warranty Does Not Cover...

...replacing or repairing your product because of misuse,
accident, unauthorized repair, or other cause not within the

control of Philips Consumer Electronics Company.

...incidental or consequential damages resulting [rom the

product. Some states do not allow the exclusion of incidental
damages, so the above exclusion may not apply to you.

...labor charges for installation or set-up, adjustment ot
customer or preference controls, and installation or repair of

antenna systems outside the product.
...a product bought, used, or serviced outside the U.S.A., Puerto
Rico, the Virgin Islands, and Canada.
...problems caused by signal or cable conditions outside the

product.

How To Get Warranty Service:

It _,_arr,mty service is required, you must ship your product

with proof-of-purchase to a Philips Factory Service Center

IN THE U.S.A., PUERTO RICO, OR THE VIRGIN ISLANDS,
ALL IMPLIED WARRANTIES INCLUDING IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION

TO THE DURATION OF THIS EXPRESS WARRANTY. Some

states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.

(listed below.)

Philips Factory Service

5164 Blazer Parkway

Dublin, OH 43017

[phone]

Philips Service Company

P.I.P. Information Center

[phone]

r_;_ I,']7_J]q_ ,]l__ _7 [__

How To Get Warranty Service:

To obtain warranty service, the product must be delivered

(carried-in) to a Philips Consumer Service Branch (listed

below). These warranties are given in lieu of all other

warranties. No other guarantees or warranties are expressed or
implied, including any implied warranties of merchantability

or fitness for a particular purpose. Philips shall not be liable
under any circumstances for any direct, indirect, special,

incidental or consequential damages, howsoever incurred,
even if notified of the possibility of same.

All that's required to validate your original factory warranty is
to present your bill of sale as proof of purchase.

601 Milner Avenue • Scarborough, Ontario MIB 1M8 •
[phone] 5930 C6te de Liesse • Montr4al, Qudbec

H4T 1E1 ° [phone] 3695 Grandview Hwy. •
Vancouver, B.C. V5M 2G7 ° [phone]

Please fill out and mail your warranty registration card promptly.

It willbe easierforus to notifyyou ifitshouldeverberequired,

Pleasealso keepyour salesreceiptandother proo(-o{.pur&ase

Philips Electronics Ltd.

IMPORTANT REMINDER: /

information.

EL4931EO01

These numbers are located on your unit. Keep this

manual nearby for easy reference.

SAFETY PRE(LAU'I'IONS ................................... 3

IMPORTANT SAFETY INSTRUCTIONS ........... _i

LIMITED WARRANTY ...................................... 5

CONTENTS ........................................................ 7

INTRODUCTION ............................................. 8

INSTALLATION ................................. 8, 9, 10, 11,12

SETTING UP ...................................................... 13

PLAYING DISCS .................................... 14, 15, 16

BEFORE REQUESTING SERVICE .................... 17

GLOSSARY ........................................................ 18

SPECIFICATIONS .............................................. 19

_._,L ,ill t)IL'+I_,LL[ LtJ [II[IL_LILIVL ,,tTki [_1 Lall_ t)l Lily iZi,,_L llll£_J' ,l[l\L

ploduct', a_,ulablc t<ida} (.ompa__t 1)1,< hltet,tc_tlve "_ou I1 be

sutprised how eas)' it is! Once conectl)' hooked up to your T\,
you sm]pl} 'point-and-chck' to explote the intriguing new world
of interactive Compact Disc

Your CD-I pla.vet also plays CD-DA (aucho compact discs) and
audio tracks flom both 5 - inch laser discs and CD-ROM discs

In a(ldlllOt3 it can play also one ot more of the following dis(

types Photo CI), CD-I Read)))',CI) Bridge and CD Graphics
(CD+G).

2 ON ()ll bt,lt_t,

3 Inptlt

4 Power ON'RI'AI) 15, mdtc.tmn_
5 Digital Video Camidge covel

6 l)(. I\

By simpl).' plugging m the Olmonal Digital Video Cartridge, you

can upgrade the playet to run intetactive Digital Video titles

including moxqes, music videos and high-power action games a',

well as Video CD's

A x_ide variety of option,tl accessories enhances ,ts flexibility
Contact your supphet

\_4k"are confident that you wtll find this product .,,u,prlsmgl,,
easy to use, and umquely lnnovat_\'e to operate

8 Au(ho R InghtL
9 Audio I. {left).

10 Video (CVBS).

[ll_II [-[_J_h_Ko]l!llF=]_

lI \__llt,II ]ILl[trill-
12 '1htm_+l)pad

(,AI_I l ION

NEVER MAKE OR (.II;ENGE CONNEC'I ION,b _ ! 111 1111.

POWER SWITCHED ON.

13 1)(. _,_ltl_u(

14 M:.tin'-, AC nat JelL

• Lt;III+,.,+t tilt+ ]JL _+JLItj)tit(l._) (Jl Lll_ J+tJ\\t+ "+uJ)J>l\ ltd,+lh,_ Ist I',

(6) _t th( +I'_hL_el"

• ln+-,ctt the plug of the c()td (14) u+tto :tn ..\+,,outlet.

NOTE

15 \'x l i'\

16 AN'L' OL 1
17 Ch:lntat:l .",t:l,.,.l_,

18 AUdlO"Poxvcr C+_lhlt_'
19 Video Cable.

• l'l.t,_u _11_.l_l.l+',t.+_,t_ .€III_+L 11.(I '.c_,l._(,_

• l,..+t_+,+._'I:,,tx_.zi+Vll'Om ht:,tt .,,oL£J_t.'+++,.tilcl +._ltt,t_',.i"+,t+t,h,_l+It
+' Itl a t_';tl+fitat:t,all+>',,,+ 2-+5,+_'ha(Upl+t I") Of I+I'UC ",[+J,t+++_'uAt, Jtll+,.n[h,_

ctrct_wtafelence of the I_[aycr for adequate ventilation

- lhc t+(),+,,'ct :+,LtI'_I'JlVzlUtot+n:ttl(':.tlly ;tdlU_t'-+ t() the local l'JOv,t+'t

\'olt;tgu.

- This l_OV,'cr ,,,ut-_ply IS intended to I-_e tn_ed only v¢ith this _1)-I

phtyet.

Only tu+,,ethe pr+scril3cc] Power Sut-_ply.

• For USA use type 20PS301/17

CAUTION

ONLY A QUA3LIFIED SERVICE PERSON SHOULD REMOVE
THE COVER OTHER THAN THE DIGITAL VIDEO

CARTRIDGE COVER OR ATTEMPT TO SERSqCE THIS

DEVICE.

- USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESU]LT IN HAZARDOUS RADIATION EXPOSL3RE.

- NEVER MAKE OR CHANGE CONNECTIONS WITH THE
POWER SWITCHED ON.

IP[-ol_r_oIoI,:'II_[,t,,]_ i=11;_![€'l=hnd_'Ji_:[o] [_ol_o__-]

_{}nne,+_ttt)ns h+_(}tder of picture (]u,t[ity', the_c __ii_"

Vide() (CVBS)

_ ntenn:_t ill

I)cpunding on the vet.,,ion ol your playel, st ]8advised that you

_onnect it to the TV input with the highest picture quality

NOTE

Please refer to the instructions that come with the TV set for

7. DC OUT.

8. Audio R (right)

9. Audio L (left).

10. Video (CVBS).

,,,election of the correct input.

For an}, optional cormection accessories you require, contact

your supplier

RI![@o]_l_ @_d[To]_,1i_o] r+'-'Sklk'Jk'.'Jllll'-Ir+-,1_ [_] ;"DIelR =i/

• Lt}l,l,vvt thu • , _.,_]J(,llvItllg ktJltllt, v[L,I'_ \\ItIU .t I£1.llt. IIlIl_ '_ldt.'t} ,..,tbIc

• h_tt{_t.+this {.able does not conncct tile audio, it has to be connected
,,cparately with a matchir_g cable (relcr to the accessones page on

the back of this manual)

• L.t}Ittl',_{.t tit,_ .\u{.Itt, 1',,,\,. _ ,.,tI}t,. LtHd liB.' \, i{_lc.,, 1{..\ t},"',J _al)l_

ot the RE modulator unnt t() the co]rc,,pot_dmg cotmectors o_

the player.

• Disconnect the input cable trom the antccma at the IX: :md

plug it into the ANT IN socket of the RF modulator

• Link the modulator's ANT OUT socket with the TV usmg the
RF cable.

• If you have a VCR (or antenna or cable) connected to the TV
antenna input and your RF modulator has an anterma input,

cormect the RF modulator hetween the VCR (or antenna or
cable) antenna output and the TV antenna input. You may

also use an optional external swttchbox, if demred.

- Your CD-I player sends pictures and sound to your TV on the
channel number indicated by the channel selector position at

the RF modulator. This signal is sent through the coaxial cable

• To operate the player with your TV, set your TV to the same
channel.

- You can avoid local interference by selecting a different
channel with the channel selector

Please refer to the mstrucnons that came with the TV set for the
selection of the channel

ANTI IN

o

RF CABLE

10

LUlp"_q_|_o] [_o_o)_[,.'_

• il \t,ul _i-_,+ tilt+ ,++d.,.',, tL.\ l;',J(I/)) _)utl,_,L \,,L, .t+'_, ,ill tSLLLI

tO (:onn,+'<+t the player",, aucho output (8,9) to tilt+' T\ ','+,audio
input

TV

NOTE

- The sound sent through the RF output to your TV is nitono
only.

° l_)t l Jtll ",_'UJULi, \_'_J '+,tlt _+'Jl+Z_u'+t LJJL I)IA_.I " _uudl_, ,)Uttl,Lit

(8,9) tO tilt,_+Jnpllt t){ _()LII }lII'l s+,,'>tem

i AMPLIFIER

CD IN

R_L AUDIO CABLE

CAUTION

DO NOT CONNECT THE PLAYER'S AUDIO OUTPUT TO THE
HIFI PHONO (RECORD PLAYER) INPUT.

INCLUDED POINTING I)E\ ltJ',: Ihc CI)-I _.otatt(,l[,.'l

- To operate you, CD-I player.

• A pointing device is needed.

• Plug the CD-I controller connector into the CD-I player.

• Insert the connector with the arrow at the top.

• Then you can switch on the player.

• Move the cursor in the dtrect_on you "*'ant by pressing m that
direction on the thumbpad

• Click on one of the action buttons

- The function selected by this "point-and-click" technique is

highlighted to confirm the selectton

OIq'IONAL DEVICES: Re)lien _,,_)tlt]',Jll,,:n, l't:Jc_ketl),tlt, [\l<)Ut__,

I'<)LI__III-_;+t¢I,CI)-I Controller, II_,-liem()tc kit, Sphttcr (refel to,)tell'

a_cussories page on the back of this manual).

NOTE

'1o "pomt-and-chck" on any screen shown m this lnanLual, an._
one of the t',\o action buttons of the pointing dewce can be

used.

The shape of the cursor may be different depending on the

program you are playing, but it ts always controlled in the same
way.

Pointing devices are senslttve precision mstrLiments Handle

them with care, keeping m mind the following precauttons

• Avoid dropping or knocking

• Do not klse then1 m locations subject to extreme tentpctatutes,
humidity, dust or vibration

• Never hold the pointing device by the cable

• Never pull the cable to discormect the pointmg device from
the player.

CAUTION

NEVER MAKE OR CHANGE CONNECTIONS WITH THE
POWER SWITCHED ON.

11

INTROI)t 4.1 lt)N :

player, you Call play the latest CI)-I discs, featuring interacti\ c
movies, music videos and state-of-art video games and video

CD's. Enjoy yourselfl But first ........

CAUTION - WHILE INSTALLING (OR REMOVING) YOUR CARTRIDGE:

2_ote: _l ,st_c'cial lo.4 k.,slqq_lied a /lb lZ_c __l/ li mi_c'. 1\_'_'t_H ,_{/_'/H

_(tN{" yOli Ilccd it.

Make _,urc IIl_.'player is switched off)

1NSTMJATION:

C)pc'n the di_ _ox cJ.

Plug in the Digital Video Cartridge.

DO lqOt lOtK']l the ('_ll|lidge
c,:)nrtectot'!

Push at the latches (side) to open
the l)igital Video Cartridge cover.

Reinstall lhe l)igital Vidc_ Calilklgc

1)o not plobu into the ",cntilation
holes!

Do not block the ventilation holes!

[ ]

Mount the l)igital Video Cartridge
identification badge on the Digital
Video Cartridge cover.

THE CARTRIDGE IS NOW INSTALLED AND SHOULD NOT BE
REMOVED WITHOUT CAUSE: IT CARRIES A LOT OF EXTRA
MEMORY WHICH IS VALUABLE EVEN FOR TITLES WITHOUT

DIGITAL VIDEO (FIR.L-MOTION).

Remove the illc[al pi'ole¢'liOl/ ()l 1[IC'
connector in the player with the

supplied tool. (Keep it for possible
future use). Do not touch the

connector.

REMOVAI.:

()pen tilL' {_li'_'. <tl%_'l

Reinstall the I)igila[ \idco ',:atkl i_lgc

cover.

12

Push at the latches (side) to open
the Digital Video Cartridge cover.

R,.:mo'_c the l)igital Video Cartridg,v
,.,.ilia the supplied tool.

Reinstall the metal protection, 1)o
not tOl.lCh tile conl-_ector,

BEFORE REQUESTING SERVICE!

- 1F THE PLAYER MALFUNCTIONS AFTER CARTRIDGE
INSERTION, TRY REMOVING AND REINSERTING IT.

- DO NOT AITEMPT RE.PAIRS: THIS WILL INVALIDATE THE

WARRANTY.

(*) OPTIONAL WITH CDI450

SUPPLIED WITH CDI550

• The green LEI) lights up.

• Switch on tl]e "Iad(and lliFi system it used).

• Select the CD-I input on the TV (and ltiFi system il u_ud i.

- On the "iV, the player
start-up screen will appear.
This screen has the following

system function icons toguide
and assist you:

• I'l<>> llac <)A _)11 J)tHt,,IJ (,_) {¢_ ,'_\\ rich t_b. t)kt)<_ ,,11.

• Switch Off the TV (and IliFi system, if uscd).

Options:
See: "OI)T1ONS SCI{EI{N".

1. CA)Audio

To presclect _,_,tJJl_Lvh'ntvd
settings when playing audio

CDs:

Auto shuffle

After switching the player on,
the tracks on the CD will

automatically be played in a
random order.

Auto FTS
After switching the player on, the I:I'S program of the C1) will be
played automatically.

Repeat
Select to repeat a complete audio disc or a single track when the

repeat function is activated.
Scan time

Select the time you want the beginning of each audio track to
play (5, 10 or 20 seconds) when the scan function is activated.

• When finished, point-and-click on 'Exit'.

System information:
OPEN: Indicates that the disc _o\ ¢'1is _q)<l_ t_)l Hot l_Jll3 tiosct_l).
DISC: Means that there is no disc in the player or the disc can
not be read due to damages or dirt (refer to p.17)

3. 'l'imc and Date
1o change the plascv',-, truly ,t_Jd

date settings:

Time/Date set

If the time or date shown on the

screen is wrong, select the

appropriate • and • arrows to
set hours, minutes, day, month
and year in turn, as required.

Time format

Select 24 hour or 12 hour clock.
Date format
Select d/m/y to present the date in day-month-year sequence.

Select m/d/y to present the date in month-day-year sequence.
Display time/date
Select to display the time and date on the TV screen.

• When finished, point-and-click on 'Exit'.

2. General

To change the players general
settings:

Auto play

Alter switching the player on,
playback will start automatically

when a disc is loaded.

Volume

Selecting the player clefault
volume setting

Dim Time (rain)
On all screens shown in this manual except CI) Graphics screen,
dim occurs automatically after 1-5-10 minutes if the player is not

used.

Dim greatly reduces the brightness of the displayed picture. The
normal brightness is restored by any user action with the control

device(s).

• When finished, point-and-click on 'Exit'.

4. Storage
Use to refer to the intermediate

results of CD-I titles and of
programs created for your audio

and Photo CDs.
The "Storage" screen shows tile

information held in memow:
titles, dates and percentage of

memo W used.

Clicking on "Name", "Date" or

"Size" sorts the infornmtion
accordingly.

• Use the scroll arrows to move up and down the list.

• To delete an item, click on its title and then click on "l)eletc".
If you change your mind after deleting, click on "Undo".

• When finished, point-and-click on 'Exit'.

ij

Loading:

- The disc cover unlatches.

• Open the cover gently until it is in the t)[_,.Jll_,,.-,lll_n //lO'

approx.) where it latches.

• Take the disc and place it in the player with the label up.

• Push the disc cover (1) to close.

- The LED flashes whilst the disc is starting up and lights sial)It

when the disc is ready for play.

- The TV screen changes according to the type of disc.

i0°

Unloading:

• Push on the disc cover (1) to open.

- The player start-up screen reappears on the "IV.

• Take the disc from the player.

• Push the disc cover (1) to close.

NOTE

- Unloading a CD-I disc while the C1)-I progr,im is ttmnmg, v_ill

terminate the CD-I program abruptly. 'Bookmarks' or

intermediate results, if used by the CD-I program, might not
be updated to reflect the latest situation.

AOAI,_

'].'hi5 j)l,.,t_t2tltllt.' 15. tilt.' >AlllC lor (.'D BRII)L,I. di:,v:,, t.l) I l(l'.i\l)]

discs and PttOTO C1)s. It is also the sanlc for Digital Video discs
and Video CDs when a Digital Video Cartridge has been

installed.

CAUTION

- NEVER LEAVE A STILL PICTURE ON THE SCREEN FOR
ANY LENGTH OF TIME. THIS CAN CAUSE BURNING-IN OF
THE PICTURE TUBE. IN SUCH A CASE, SWITCH OFF THE
PLAYER OR REMOVE THE DISC.

- When a title consists of more than one consecutive disc, a so
called 'multi-disc' title, follow the instructions for opening and

closing the disc cover as shown on this screen.

Certain aspects of CD-I disc playhack depend on the value of
Auto play (see settings). The factor T setting is default "ON".

1.When autoplay is "ON":

After loading the disc, the CD-I program will start tip
automatically.

CAUTION

NEVER PUT MORE THAN ONE DISC AT A TIME INTO THE
CD-I PLAYER

_q \\ _1<'1_,_ut_,l_la } 1>, 't)l I :

After loading tile disc, the t;l) I sl;tll-Lij_:_,_t_ '_\ili al)l_cm_ the
TV.

To start the CD-I program, select the 'Play' icon on the screen and

click on it.

The opening screen of the CD-I

program nov, appears on the TV.

From this point, all interaction is
between you and the program.
To stop at any time, select the

STOP or EXIT function provided

by the CD-I program.

14

inch (12 cm) laser discs.

- After loading tile disc, the CI)-
Audio screen appears on the TV.

1, Play track bar: shows tile total

number of tracks (up to 30). 4 5 6 I

select any track. For discs with
You can 'point-and-click' to I _

more than 30 tracks, the right •

toandmoveleft•throughscroll arrowsthe trackarelist.Used

2.PROGRAM: allows you to program a list of special tracks,
called a Favorite Track Selection. When you select PROGRAM,
the FTS track bar and the FTS icon will appear.

3.FTS: allows you to play Favorite Track Selections. This icon
only appears if a Favorite Track Selection has been created for
the disc that is loaded in the player.

4.SCAN: allows you to listen to the beginning of every track
listed in the play track bar. You can set the scan time to 5, 10
or 20 seconds by using the 'Options' screen.

5.SHUFFLE: allows you to play the tracks in the play track bar

in a random order.

6.REPEAT: allows you to repeat either one track or the entire

disc. You can change the repeat mode in the 'Options' screen.

7. TRACK/TIME window:

- after loading, and in STOP mode, this shows the total number

of tracks and the total playing time. When you click on this
window (7), the track time of the selected track is displayed.

- in PLAYand PAUSE modes, the window shows the track number

and either the elapsed or the remaining track playing time. To
switch between elapsed and remaining time, 'point-and-click' at

the time shown in the window.

8.All the disc play control functions are shown on the screen,
and can be selected as desired by 'pointing-and-clicking' with

your pointing device. The operation of the functions is briefly
explained in the following table.

NOTE

If attto SIIUFFLE or auto FTS has been selected on the 'CD
Audio' screen, this function will be activated atttomatically.

OI'I;I_\IION

Start play

Select a track

Pause

Exit pause

Forward search

Reverse search

Stop play

Scan the disc

Exit scan

Shuffle play

Exit shuffle

Repeat

Play FTS

Exit FTS

Program FTS

Store FTS

SEIA_(Jl

play
play starts at the beginning ol track 1, _)i dll_
other preselected track number. If a track is
already playing, it is restarted.

NOTE: When play starts, adjust the sound

level as required.
track number

if the disc contains more than 30 tracks, use the
left • and right • scroll arrows to move

through the track numbers as required.

pause
interrupts the play mode.

pause or play
play restarts at exactly the same point as thai
at which pause was selected.

forward
searches forward through disc, first slowly,

then quickly.
reverse

searches backwards through disc, first slowly,
then quickly.

stop

use to stop playing.

scan
plays the beginning of each track on the disc

in turn.

scan
normal play starts from this point.

shuffle

shuffle sequence appears in track bar.

shuffle

normal play starts from this point.

repeat
repeats the entire disc (or FTSprogram), or the

track being played, as selected on the
"Options" screen.

FTS

only available when an VI'S program has
already been created for the disc in the

player.

FIrS

normal play starts from this point.

program

• Point to tracks as required on the play track

bar, and in each case click on any action buttoi-i
to record the track in the FTS track bar.

• To cancel an unwanted track, point to it in

the FTS track bar and click on any action

button.

• To cancel the entire FTS program, point to

the first track in the FTS track bar and click on
any action button repeatedly until all the

tracks disappear.
save FTS

the keyboard screen replaces the CD-Audio
screen. See 'CREATING FI"S TYI'LES', p 16.

15

(.'OIl]posea title of approx. 30 characters (depending on the
dlaracter width) for the selection using the keyboard screen.

- The title then appears on the CD-Audio screen whenever the

disc is loaded.

• At the CD-Audio screen, 'point-and-click' on the program

button, then 'point-and-dick' on the "Save FTS" button.
The CD-Audio screen will change
to the keyboard screen.

• Select each character of the
title in turn, using shift to

change between upper and
lower case characters and

space to separate words.

l)clwtc, cl_t>,__>the: J:l>t._,<qcc/_d (._l_l[,lvit_l.

Clear erases the complete (or partially c(Tml)lctc) tit\:
Cancel returns to the C1)-Audio screen without saving the title.

OK saves the title and returns to the CD-Audio screen.

\\ {]L'II _tLl Llk{_l[<) _A) \\1_[I

graphics is played, the CI)
Graphics screen will appe:,

:mtomatically.

• To let the picture channel bar

appear/disappear, click on the
action button anywhere

outside the channel bar.

• You can select another track
number by clicking on "Track" o_ t..it_lt,l- ,hi it )\\ l l_. x[ t() it.

l)cpenciing (m the disc, other channel numbers might give } ou
other information, such as the lyrics in a different language.

• Refer to the instructions that came with the disc R)r their functions.

• To play audio only, click on the 'Audio' icon.

• '1'o start the Photo CI) program, select the 'PLAY CI) 1' icon on

the screen.

- The opening screen of the Photo CD program now appears on

the TV.

At the bottom of this screen a menu bar with icons is shown.

• Select the [53/ icon.

- The 'Options' screen wilt now appear.

• To select a _anguage, click on the box, the l]ag (71-the name of

a country.

- The previous setting will be replaced automatically.

_.;AI3 II(.)N

NI,_. I_A{ kl;:\Vl'; A S'IILL IqCTURE ON Till'. 5(._RIiI'.N I;OR ANY
LENGTH OF '_rIME. THIS CAN CAUSE BURNING-IN OF THE

PICTURE TUBE, IN SUCH A CASE SWITCH OFF THE PLAYER
OR REMOVE THE DISC (SEE DIM OPTIONS).

Photo CI) opening screen.

• Select the _t icon (lnforma|ion) and the INFORMNI'ION
screen, explaining the control buttons of the menu har in the
selected language, appears.

• From this point, all interaction is between you and the
program.

CAUTION

NEVER LEAVE A STILL PICTURE ON THE SCREEN FOR ANY

LENGTH OF TIME. THIS CAN CAUSE BURNING-IN OF THE
PICTURE TUBE. IN SUCH A CASE SWITCH OFF THE PLAYER

OR REMOVETHE DISC. (SEE DIM OPTIONS).

1(7

II it alq)cav> that the _.;1)-1 pkL_cr is laulty, lirst _l>ull this
checklist.

It may be that something simple has been overlooked.
t Jnder no cil'cumstances should you attempt to repair the SyStCI|I

yourself; this will invalidate the warranty.

No power ........................ ° Check that the ON/OFF

button (2) is set to ON.

° Check that both plugs of the pox_cr

supply are properly connected.

• Check that there is power at the AC

outlet by plugging in another appliance.

Controller does not

operate ............................ ° Reset by switching player off, then

on again.

No picture ....................... • Check that the TV is switched on.

Distorted picture ........... • Check the disc for fingerprints and

• Select the same channel or input on

the TV as that of the player or check
the video connection.

clean with a soft cloth, wiping from
centre to edge.

Interference pattern

on TV ............................... • Avoid close position of video and

audio cables to power supply.

White dots on the screen (only for RF).

.......................................... • Check the position of the power

supply and RF modulator (cables). Avoid
close position.

No start-up.
Screen does not change

.......................................... • Check if the disc door is properly

No sound ......................... • Check audio connections.

closed.

• Make sure the disc label is facing up.

• Clean the disc.

• See if the disc is defective by

trying another disc.

• If u,_irrg a HiFi amplifier, try another

sound source.

Distorted sound

from HiFi amplifier ...... • Check to ensure that audio

connections have not been made to
the amplifier Phono input.

No return to start-up
screen when disc is

removed .......................... • Check to see if the C1)-I progral_l

requires another disc to be loaded.

• Reset hy switching the player off,

then on again.

17

For your convcniel_cC, the lollowing list ot terms is provided to help you understand the CD-I Hayer and its
operation.

ACTION BUTTON - Two keys on the pointing device to
perform actions or features.

AUDIO OUT - There are two jacks located on the back of your
CD-I Player. They are used to send audio (sound) from the

Player to either the TV, Stereo Receiver, or Amplifier. You could
also hook it up to a VCR (Video Cassette Recorder) or Audio

Cassette Recorder to record sound sent out from your Player.

CD, CD-DA, or CD-AUDIO - Terms used to describe a disc
that produces only audio (sound) for your CD-I Player.

CD = Compact Disc
CD-DA = Compact Disc-Digital Audio
CD-Audio = Compact Disc Audio

DIGITAL VIDEO DISCS and VIDEO CD'S -These discs can
only be played when a Digital Video cartridge is installed.

CD GRAPHICS - a technique for generating text, still
pictures, or animated graphics that are related to the sound

portion of the Compact Disc (CD).
CD-I - Compact Disc Interactive. A type of disc with both

pictures and sound. Interacting with the disc allows you to
tailor it to your taste.

CD-I PLAYER - Compact Disc Interactive Player. A device that
allows you to play several types of discs, including CD-I, CD,

Photo-CD and CD-ROM XA (Bridge).
CD-ROM-XA (Bridge) - One of several types of discs you can

play in your CD-I Player.

CURSOR - Moving spot, controlled by your pointing device,
shaped as an arrow or something else according the program

you are playing, to guide you across the screen.

FEATURE - A task the CD-I Player can perform. For example,
the Dim feature of the Player will dim your TV screen if it is

selected.

ICON - a display on one of the CD-I shell screens. The icon
shows where to place the arrow. Press on one of the

ACTION buttons to begin that feature. Example: "PLAY CD-I

• " on the CD-I screen. Place the arrow on top of the "•" and

click on one of the ACTION buttons and the CD-I starts
playing.

MODE - The operating condition or status of the CD-I Player.
This is determined by the function currently engaged and/or
the setting selected. For example, "Play mode".

PAUSE - Temporarily stopping play of a CD-Audio. When in
the Play mode, press the PAUSE button to put the CD-I Player

in the Pause mode.

PHOTO-CD - A type of compact disc on which photographs
have been stored.

PLAY -The act of the Player taking the picture and/or sound
from a disc and sending it to your TV and/or Stereo Receiver or

Amplifier. You must press the PLAY button or select the PLAY
icon before the Player will start reading a disc.

RF COAXIAL CABLE - Black, insulated, round cable used to
connect the RF-modulator to the TV antenna input.

RF MODULATOR - Converts the audio and video output
signal of the CD-I player to a RF-signal which can be fed into

your TV's antenna input.
SCREENS - Word used when discussing with your TV. For

example, "TV screen" refers to the area on the TV for viewing
pictures.Word also used when discussing CD-I Player display
screens. For example, the "CD-I Player Start-Up screen." These

screens allow you to select functions you want the Player to
perform.

STOP - Ending play of a disc. When in the Play mode, press
the STOP button to end play of a CD-Audio.

THUMBPAD - The part of the pointing device used to guide
the arrow across the screen. Place the arrow on top of the icon

of a feature you want to perform.
TRACKS - Disc sections varying in length. There can be many

tracks on one disc, with each track a distinct unit. Tracks are
important in using the Scan and Shuffle features.

VIDEO OUT - There is one jack on the back of your CD-I
Player that can be used to send pictures (video) to your TV. You

could also hook it to a VCR (Video Cassette Recorder) to record
pictures sent out from the Player.

VOLUME - The amount of sound you hear.

POINTING DEVICE - By pressing the buttons, signals are

sent to the CD-I player to perform desired actions. For example
PLAY.

18

System

Cl)-h_teraLt]_ c

Usable discs
CD-I
CD-DA
PHOTO-CD
CD-I READY
CD BRIDGE
CD+GRAPHI(_'S

Power requirement

120 V AC / 60 Hz.

Power consumption
28 W with, 21 W without Digital Vid_'o L artridg_' (22J .1¢._)93o).

Operating temperature

41°F(5°C) to 95°F(35°C)

Relative humidity

5% to 95% (no condensation)

Weight

Witla Digital Video Cartridge: 1,460 Kg, 0,661 lbs.
Without Digital Video Cartridge: 1,210 Kg, 0,548 lbs.

Dimensions (w x h x d)
Cover closed:

299 mmx 67 mmx 190 mm
11,75" x 2,64" x 7,5"

Cover open:

299 mm x 183 mitt x 190 mm
11,75" x 7,32" x 7,5"

Input

input (1 ports) 8-pin mini-DIN
suitable for connection of max. 2 devices (when _plittcr

is used), e.g. 2 pointing devices

pin signal 1/O

1

2

3
4
5
6
7
8

rxdl l
rxd2 I
txdl O

rtsl O
ground

ctsl 1
rts2 O

+5V (150 mA max.) O

Note: Pointing device speed of 1200 baud is supported.

Designs and specifications are subject to change without notice.

Output

video (NTSC) 1 Vpp (75 Ohm load, sync neg) RCA jack socket.

audio 2 Vrms

2 channel individual RCA jack sockets

Audio-Power Cable:

RF Power + 5V, max. 50 mA

Audio Audio(mono); 1.55 Vrms

l_)

lr,.][_ [_i:i [..--,][.,.',][,] I:1 I1_ [-,.-,]

SUPPLIED ACCESSORIES

These accessones are provtded to help you use or set-up
your CD-I Player.

Power supply
22ER9156/17

RF Modulator* Audto L-R Cable CD-I Mouse Roller Controller CD-I Trackball
22ER9071/17 SBA2135A01 22ER9011 22ER9012 22ER9013

OPTIONAL ACCESSORIES

Maximize your pleasure w_th state-of-the-art accessories
designed specifically for your CD-I Player.

The optional accessories shown here may be purchased from
your supplier.

!! !!,,

Antenna Cable* CD-I Controller D_g_talWdeo

(RF coaxial cable) 22ER9019 Cartndge**
SBV1130A01 22ER9956

IR set (Receiver + 300 ohm - 75 ohm Video (CVBS)
Rern Control) Transformer Cable

22ER9054 00SBVl 113A01 SBV1127A01

Connection kit
22ER9155/17

I/O Port Sphtter Touchpad

22ER9208 22ER9017

Audto Stereo
Sphtter

22ER9209

type no. of product

CD1450

Date of purchase
day mof,th year 19

" available on some player versions oIIly
** supplied w_th CDI550

The products and services described herein are nor r_ec_ss,irLly d¢&llat)iu th rilL C I IL, I Ill I%S

@1994 PHILIPS INTERACTIVE MEDIA SYSTEMS

Dealer 5 nalhe addleSS alqd SlgllatU[e

DuL to COI]LIE,UOUS ,oIOdUCi il]lplovecleT-its tiLlS CJOOUmLf]t LS SLIbJCC; to ¢ I_alILJL WI[IIOLI[ hub, (

PrJnted Jn Belgium 3104 125 21041

IB7108E001