Magnavox 30MW5405-17 User Manual

3141 095 20371

Thank you for choosing Magnavox.

Need help fast?

USER MANUAL

Color Television

30MW5405/17

Read your Quick Use Guide and/or User Manual first for

quick tips that make your using your Magnavox product

more enjoyable. If you have read your instructions and still

need assistance you may access or our online help at

www.magnavox.com

or

call 1-800-705-2000

while with your product.

Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a
MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your pur­chase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to

ensure you receive all the

benefits

you’re entitled to.

Warranty
Verification

Registering your product
within 10 days confirms your
right to maximum protection
under the terms and condi­tions of your MAGNAVOX
warranty.

Owner
Confirmation

Your completed Warranty
Registration Card serves as
verification of ownership in
the event of product theft or
loss.

Model
Registration

Returning your Warranty
Registration Card right away
guarantees you’ll receive all
the information and special
offers which you qualify for
as the owner of your model.

Visit our World Wide Web Site at http://www.magnavox.com

For Customer Use

Enter below the Serial No. which is located
on the rear of the cabinet. Retain this infor­mation for future reference.

Model No. __________________________
Serial No. __________________________

Know these

safetysymbols

This “bolt of lightning” indicates unin-

sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.

The “exclamation point” calls atten-

tion to features for which you should
read the enclosed literature closely to pre­vent operating and maintenance problems.

WARNING: To r educe the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.

CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.

ATTENTION:Pour éviter les choc élec­triques, introduire la lame la plus large de la
fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.

t

s

Congratulations on your
purchase, and welcome to the “family!”

Dear MAGNAVOX product owner:

Thank you for your confidence in MAG­NAVOX.You’ve selected one of the best­built, best-backed products available today.
We’ll do everything in our power to keep
you happy with your purchase for many
years to come.
As a member of the MAGNAVOX “family,”
you’re entitled to protection by one of the
most comprehensive warranties and out­standing service networks in the industry.
What’s more, your purchase guarantees
you’ll receive all the information and special
offers for which you qualify, plus easy
access to accessories from our convenient
home shopping network.
Most importantly, you can count on our
uncompromising commitment to your total
satisfaction.
All of this is our way of saying welcome­and thanks for investing in a MAGNAVOX
product.

P. S. Remember, to get the most

from your MAGNAVOX prod­uct, you must return your
Warranty Registration Card
within 10 days. So please mail
it to us right now!

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance

with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and third grounding prong.
The wide blade or third prong are provided for your safety.When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from
the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the appara-
tus. When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power­supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.

15. This product may contain lead and mercury. Disposal of these materi-

als may be regulated due to environmental considerations. For dispos­al or recycling information, please contact your local authorities or
the Electronic Industries Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be serv-

iced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appli-

ance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties of
its cabinet design.

• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.

• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsus­pectingly fall from the top of the set and cause product damage
and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mount-

ed to a wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from

power lines.

20. Outdoor Antenna Grounding - If an outside antenna is

connected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an anten­na discharge unit, size of grounding connectors, location of antenna­discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure below.

21. Object and Liquid Entry - Care should be taken so that

objects do not fall and liquids are not spilled into the enclosure
through openings.comply with recommended international global safety
standards for tilt and stability properties of its cabinet design.

22. Battery Usage CAUTION - To prevent battery leakage that

may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - aligned as marked on
the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,as
close to the point of cable entry as practical.

Example of Antenna Grounding
as per NEC - National Electric Code

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

PANEL LAYOUT

PANEL INDEX

Subject Panel No.

Alternate Channel . . . . . . . . . . . . . . . . .29

Audio/Video Connections

Rear Audio/Video Input Jacks . . . . . . . .4

Headphone Jack . . . . . . . . . . . . . . . . . .8

Automatically Program TV . . . . . . . . . . .13

Basic Antenna Connection . . . . . . . . . . . .1

Basic Remote Operation . . . . . . . . . . . . .3

Basic Television Operation . . . . . . . . . . . .3

Cable/Cable Box Basic Connection . . .1-2

Care and Cleaning . . . . . . . . . . . . . . . . .31

Channel Edit . . . . . . . . . . . . . . . . . . . . .14

Closed Caption Control . . . . . . . . . . . .27

Format Control . . . . . . . . . . . . . . . . . .17

Language Control . . . . . . . . . . . . . . . . .11

Limited Warranty . . . . . . . . . . . . . . . . . .32

Picture Menu Controls . . . . . . . . . . . . .15

Remote Control Button Descriptions 9-10

Sleeptimer . . . . . . . . . . . . . . . . . . . . . . .27

Subject Panel No.

Remote Batteries Installation . . . . . . . . . .3

AutoLock™ Controls

Access Code . . . . . . . . . . . . . . . . . . . .21

Block All Channels . . . . . . . . . . . . . . . .23

Block Channels . . . . . . . . . . . . . . . . . .22

Clear All Blocked Channels . . . . . . . . .23

Movie Ratings . . . . . . . . . . . . . . . . . . .24

Other Blocking Options . . . . . . . . . . .26

TV Ratings . . . . . . . . . . . . . . . . . . . . . .25

Understanding AutoLock™ . . . . . . . . .20

SmartPicture™ Control . . . . . . . . . . . .28

SmartSound™ Control . . . . . . . . . . . . .28

Sound Menu Controls . . . . . . . . . . . . . .18

Timer Menu Controls . . . . . . . . . . . .18-19

Tr oubleshooting . . . . . . . . . . . . . . . . . . .30

Tuner Mode . . . . . . . . . . . . . . . . . . . . . .12

Side 1

Side 2

MODEL
REGISTRATION
INFORMATION

SAFETY

INFO

PANEL

LIMITED

WARRANTY

(Panel 38)

1

PANEL

PANEL

PANEL

VER

CO

PANEL

PANEL

Panel Index

and

PANEL

Sequence

Panel

2

4

6

17

19

21

PANEL

3

PANEL

5

PANEL

7

PANEL

18

PA N E L

20

PANEL

22

PANEL

PANEL

8

PANEL

PANEL

PANEL

PANEL

PANEL

PANEL

10

12

23

25

27

11

PANEL

13

PANEL

24

PANEL

26

PANEL

28

9

PANEL

14

PANEL

15

PANEL

16

PANEL

29

PANEL

30

PANEL

31

BASIC ANTENNA CONNECTIONS

1

A

combination antenna receives normal

broadcast channels (VHF 2–13 and
UHF 14–69).Your connection is easy
because there is only one 75Ω (ohm)
antenna plug on the back of your TV, and
that’s where the antenna goes.

1

If your antenna has a round
cable (75 ohm) on the end, then

you're ready to connect it to the
TV.

If your antenna has a flat,
twin-lead wire (300 ohm), you

first need to attach the antenna
wires to the screws on a 300- to
75-ohm adapter.

2

Push the round end of the
adapter (or antenna) onto the 75Ω
(ohm) plug on the back of the TV.
If the round end of the antenna
wire is threaded, screw it down
finger tight.

Back of TV

Cable signal

coming from

Cable Company

Jack Panel

Back of TV

75 ⍀

1

2

75‰

L/Mono

R

S-VIDEO

VIDEO

AUDIO

AV1 inMonitor out

COMPONENT VIDEO INPUT

Y

Pb

Pr

AV2 in

BASIC CABLE TV CONNECTIONS

T

he Cable TV input into your home

may be a single (75 ohm) cable. If so,
this connection is very simple. Follow the
steps below to connect your cable signal
to your new television.

1

Connect the open end of the
round Cable Company sup­plied cable to the 75Ω input on

the TV. Screw it down finger tight.

Antenna Connection

300 to 75Ω

Adapter

Combination

VHF/UHF Antenna

(Outdoor or Indoor)

Twin Lead

Wire

Round Cable

75Ω

Back of TV

Direct Cable Connection

75Ω Round

Coaxial Cable

1

ANT 75‰

Monitor out

AV2 in

AV1 in

VIDEO

Y

L/Mono

Pb

AUDIO

S-VIDEO

R

Pr

COMPONENT VIDEO INPUT

CABLE

IN

TO
TV

VIDEO

OUT

LR

AUDIO

OUT

3 4

OUTPUT

CH

4

24

ANT 75Ω

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

5

6

CABLE BOX CONNECTIONS

2

CABLE

I

f your cable signal uses a cable box or
decoder, follow the easy steps below to com-

plete the connection.

Cable Box (w/RF In/Outputs):

This connection will be mono.

1

Connect the Cable Company sup­plied cable to

the signal IN(put) plug

on the back of the Cable Box.

2

Using a separate round coaxial cable,

connect one end to the OUT(put)
(TO TV) plug on the back of the
Cable Box.

3

Connect the other end of the
round coaxial cable to the 75Ω

input on the back of the television.
Screw it down finger tight.

NOTE: Set the OUTPUT CHANNEL
SWITCH on the back of the cable box to
CH 3 or 4.Tune the TV to the same chan­nel and change channels at the cable box.

Cable Box (w/Audio/Video Outputs):

This connection will supply Stereo sound.

4

Connect the Cable Company sup­plied cable to

the cable signal
IN(put) plug on the back of the
Cable Box.

5

Using an RCA type Video Cable, con­nect one end of the cable to the
Video (or ANT, your cable box may be

labeled differently) Out jack on the
cable box and the other end to the
AV1 Video Input on the TV.

6

Connect one end of the Audio Left
and Right Cable to the left and right

Audio Out L & R jacks on the
cable box. Connect the other end to

the AV1 Audio L & R Input jacks on
the TV.

NOTE: Use the Channel + or – buttons on
the TV remote control to tune to the AV1
channel for the cable box signal. Once
tuned, change channels at the cable box, not
the television.

Jack Panel Back of Cable Box

Cable Signal IN
from the Cable

Company

Round 75Ω

Coaxial Cable

Jack Panel Back of TV

Cable Signal
IN from the

Cable Company

Cable Box with A/V Outputs

Jack Panel
Back of TV

Audio Cables
L & R (Red,White)

Video Cable (Yellow)

Output Channel Switch

Cable Box (w/RF In/Outputs):

Cable Box (w/Audio/Video Outputs):

IN

1

2

TO TV

OUTPUT

CH

3 4

3

ANT 75Ω

Monitor out

AV2 in

AV1 in

VIDEO

Y

L/Mono

Pb

AUDIO

S-VIDEO

R

Pr

COMPONENT VIDEO INPUT

3

BASIC TV AND REMOTE CONTROL OPERATION

TELEVISION

Press the POWER button to

turn the TV ON.

1

Note:You can also press any but­ton on the top of the TV to turn
the TV ON.

Press the VOLUME + button
to increase the sound level, or

2

the VOLUME – button to
lower the sound level.

Press the CHANNEL UP +
or DOWN - button to select

3

TV channels.

REMOTE CONTROL

Point the remote control

toward the remote sensor win-

4

dow on the TV when operating
the TV with the remote.

BATTERY INSTALLATION

Remove the battery com­partment lid on the back of

5

the remote.

Place the batteries (2-AA) in
the remote. Be sure the (+)

6

and (-) ends of the batteries line
up correctly (inside of case is
marked.)

Reattach the battery lid.

7

POWER

1

Power Light Indicator ­Light will show while TV
is powered on.

E

W

O

P

23

6

1

45

78

A/CH

S

5
7

+

+

VOLUME

CHANNEL

–

2

Remote Sensor ­Sensor for activating remote
control commands when the
remote is used to control the
TV.

1

R

H

C

H

C

L

9

VO

L

CC

VO

0

S

U

T

A

T

IT

X

E

E

T

U

U

N

E

M

M

P

E
E
L

S

T

AR

M

D

N

S

U

O

S

E

R

F

U

R

T

U

C

S

I

P

–

3

X

O

V

GNA

MA

HELPFUL HINT

Remember, the tuned channel num­ber will always briefly appear when
the TV is first turned ON (and with
channel changes.)

You can also press the STATUS/EXIT
button (on the remote) to see what
channel the TV is ON.

6

USING THE AV1 INORAV2 IN (INPUT) JACKS

4

T

he TV’s audio/video input jacks are for

direct picture and sound connections
between the TV and a VCR (or similar
device) that has audio/video output jacks.
Both the AV1 and AV2 Input Jack connec­tions are shown on this page, but either
one can be connected alone. Follow the
easy steps below to connect your accessory
device to the AV1 and AV2 IN Jacks located
on the back of the TV.

1

Connect the VIDEO (yellow)
cable to the VIDEO AV1 IN (or

AV2 IN) jack on the back of the TV.

2

Connect the AUDIO (red and
white) cables to the AUDIO (left

and right) AV1 IN (or AV2 in) jacks
on the rear of the TV.

3

Connect the VIDEO (yellow)
cable to the VIDEO OUT jack on

the back of the VCR (either one or
two) or accessory device being used.

4

Connect the AUDIO (red and
white) cables to the AUDIO (left

and right) OUT jacks on the rear of
the VCR (either one or two) or
accessory device being used.

5

Turn the VCR (either one or
two) or accessory device and
the TV ON.

6

Press the CH + or CH- buttons
to set the TV to its AV1or AV2
channel. (Go to your lowest channel,

for example channel 1, then change
channels down to find the correct
input.)

7

With either of the VCRs (or accesso­ry devices) ON and a prerecorded
tape (CD, DVD, etc.) inserted, press
the PLAY button to view the tape
on the television.

Audio and video cables are not
supplied with the TV, but are avail­able from Magnavox or electronics
retailers.

HELPFUL HINT

Audio In
(Red and

White)

VCR Two (or accessory

device) (Equipped with

Video and Audio Output Jacks)

Video In
(Yellow)

Back of VCR

Back of TV

AV1

Connection

AV2

Connection

VCR One (or accessory

device) (Equipped with Audio

and Video Output Jacks)

5

5

ANT/CABLE

OUT

ANT/CABLE

OUT

4

VIDEO

L/Mono

AUDIO

4

S-VIDEO

OUT

S-VIDEO

OUT

1

Monitor out

R

COMPONENT VIDEO INPUT

R L

AUDIO OUT

R L

AUDIO OUT

AV1 i n

1

AV2 in

Y

Pb

Pr

VIDEO

OUT

2

S-VIDEO

2

3

7

VIDEO

OUT

3

7

USING THE S-VIDEO INPUT JACKS

5

T

he S(uper)-Video connection on the

rear of the TV can provide you with bet­ter picture detail and clarity for the play­back of accessory sources such as DBS
(digital broadcast satellite), DVD (digital
video discs), video games, and S-VHS VCR
(video cassette recorder) tapes than the
normal antenna picture connections.

NOTE: The accessory device must have
an S-VIDEO OUT(put) jack in order for
you to complete the connection on this
page.

1

Connect one end of the S­VIDEO CABLE to the S-VIDEO

jack on the back of the TV.Then
connect one end the AUDIO (red
and white) CABLES to the AV2 in
AUDIO L and R (left and right)
jacks on the rear of the TV.

2

Connect other end of the
S-VIDEO CABLE to the

S-VIDEO OUT jack on the back of
the VCR.Then connect the other
ends of the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.

3

Turn the VCR and the TV
ON.

4

Press the CH + or CH- buttons
to set the TV to its SVHS2
channel. (Go to your lowest chan-

nel, for example channel 1, then
change channels down to find the
correct source channel.)

5

Now your ready to place a prere­corded video tape in the VCR and

press the PLAY  button

.

The S-VIDEO and VIDEO AV2 in(puts) are in
parallel. The S-VIDEO input is dominant when
in use. If separate video signals are connected
to the S-VIDEO and VIDEO AV2 in(puts), the
signal from the VIDEO AV2 in(puts) will not be
usable.

HELPFUL HINT

Audio Cable

(Red and White)

VCR (Equipped with

S-Video Jacks)

S-Video Cable

Back of VCR

Back of TV

2

L R

AUDIO OUT

3

Monitor out

VIDEO

L/Mono

AUDIO

R

123

45

789

A/CH

STATUS

EXIT

SLEEP

1

AV1 in

Y

Pb

Pr

COMPONENT VIDEO INPUT

S-VIDEO

VIDEO

OUT

0

SURF

MAGNAVOX

6

CC

MENU

SMART

PICTURE SOUND

ANT/CABLE

OUT

POWER

CH

CH

VOL

VOL

MUTE

AV2 in

1

S-VIDEO

OUT

2

5

4

USING THE

CVI (COMPONENT VIDEO INPUT) JACKS

C

omponent Video inputs provide for

the highest possible color and picture

resolution in the playback of digital signal
source material, such as with DVD play­ers. The color difference signals (Pb, Pr)
and the luminance signal (Y) connected
and received separately, which allows for
improved color bandwidth information
(not possible when using composite video
or S-Video connections).

1

Connect the Component (Y,
Pb, Pr) Video OUT jacks from

the DVD player (or similar
device) to the (Y, Pb, Pr) in(put)
jacks on the TV.When using the
Component Video Inputs, it is
best not to connect a signal to
the AV1 IN Video Jack.

2

Connect the red and white
AUDIO CABLES to the Audio

(left and right) output jacks on
the rear of the accessory device
to the Audio (L and R) AV1 IN
Input Jacks on the TV.

3

Turn the TV and the DVD
(or digital accessory device)
ON.

4

Press the CH + or CH- but­tons to set the TV to its CVI
channel. (Go to your lowest

channel, for example channel 1,
then change channels down to find
the correct source channel.)

5

Insert a DVD disc into the DVD
player and press the PLAY 

button on the DVD Player.

The description for the component video connec­tors may differ depending on the DVD player or
accessory digital source equipment used (for exam­ple,Y, Pb, Pr;Y, B-Y, R-Y;Y, Cr, Cb). Although abbrevi­ations and terms may vary, the letters b and r stand
for the blue and red color component signal con­nectors, and Y indicates the luminance signal. Refer
to your DVD or digital accessory owner’s manual
for definitions and connection details.

Note: Cables are not supplied with the TV, but are
available from Magnavox or electronics retailers.

HELPFUL HINT

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

S-VIDEO

OUT

OUT

OUT

L

R

AUDIO

VIDEO

COMP VIDEO

Y

Pb

Pr

2

1

3

5

Audio

Cables

(Red and

White)

Component

Video

Cables

(Green, Blue,

Red)

Back of TV

Accessory Device

Equipped with

Component Video

Outputs.

The CVI connection will be dominate over the AV1 in Video
Input.When a Component Video Device is connected as
described, it is best not to have a video signal connected to
the AV1 in Video Input jack.

6

USING THE MONITOR OUT(PUT) JACKS

T

he Monitor (Audio/Video) out jacks are

great for recording with a VCR or used to
connect an external audio system for better
sound reproduction.

For Audio System Connection:

1

Connect one end of the R(ight)
and L(eft) AUDIO (Monitor
Out) jacks on the TV to the R and

L audio input jacks on your amplifi­er or sound system. Set the audio
system’s volume to a normal listen­ing level.

2

Turn the TV and audio system
ON. You can now adjust the sound

level coming from the audio system
with the VOLUME (+) or (–) button
on the TV or remote control.

For Second VCR
Connection/Recorder:

NOTE: Refer to panel 4 for the proper

hookup of the first VCR. Follow the
instructions on how to tune to the AV1
channel to view a pre-recorded tape.

The following steps allow you to
connect a second VCR to record the
program while you’re watching it.

3

Connect one end of the yellow
Video Cable to the Monitor out

VIDEO plug. Connect the other
end to the VIDEO IN plug on the
second VCR.

4

Connect one end of the red
and white Audio cable from the
Monitor out AUDIO L and R

plugs on the TV to the AUDIO IN
plugs on the VCR.

5

Turn the Second VCR ON,

insert a VHS tape and it’s ready to
record what’s being viewed on the
TV screen.

Jack Panel

Located on the back of the TV

Audio Cables

(Red & White)

Audio System

with Audio Inputs

AV O UT

AUDIO L(eft) and R(ight)

Jack Panel

Located on the back of the TV

Audio Cables

(Red & White)

First VCR (accessory device)

(Hookup from Panel 4)

Monitor OUT
VIDEO &AUDIO
L(eft) and R(ight)

Second VCR

Video Cable

(Yellow)

Audio and video cables are not sup­plied with the TV, but are available
from Magnavox or electronics retailers.

HELPFUL HINT

7

2

3

ANTENNA

ANTENNA

5

OUT

IN

VIDEO

OUT

IN

VIDEO

L/Mono

AUDIO

OUT

L

AUDIO

IN

Monitor out

R

COMPONENT VIDEO INPUT

Monitor out

VIDEO

L/Mono

AUDIO

R

R

AV2 in

AV1 in

Y

Pb

Pr

R

L

AUX/TV INPUT

PHONO INPUT

AV1 in

Y

Pb

Pr

COMPONENT VIDEO INPUT

4

AV2 in

1

AUDIO

S-VIDEO

S-VIDEO

ANTENNA

OUTOUT

IN

VIDEO

LR

ANTENNA

OUT

IN

IN