Magnavox 24ME403V, 29ME403V, 32ME303V, 32ME403V, 39ME313V Owner Manual
...
Owner’s Manual
Manual del Propietario
Manuel du Propriétaire
1 866 341 3738
www.magnavox.com/support
Necesita ayuda
inmediata?
1 866 341 3738
www.magnavox.com/support
1 866 341 3738
www.magnavox.com/support
39ME413V
32ME403V
29ME403V
24ME403V
50ME313V
46ME313V
40ME313V
39ME313V
32ME303V
Contents
English
2
1Notice 5
2Important 6
Positioning the TV 6
Regulatory notices 6
Environmental care 6
3Get started 7
Features 7
Supplied accessories 7
Symbols used in this Owner’s Manual 7
Stand assembly 8
Attaching the base 8
Mounting the unit on your furniture 8
Managing cables 9
Installing the remote control batteries 9
Remote control 10
Control panel 11
Terminals 11
Connecting the antenna or the cable 12
Connecting a Set-top Box, Blu-ray / DVD Recorder
via Composite connectors and Analog Audio 12
Plugging in the AC power cord 12
Selecting your connection quality 13
HDMI - Highest quality 13
Component (Y Pb Pr) - High quality 13
Composite - Basic quality 13
Connecting your devices 13
HDMI Digital connection 13
HDMI-DVI connection 13
Component Analog Video Connection 14
Composite Analog Video Connection 14
Digital Audio Output Connection 14
PC connection 15
USB Memory Stick 15
Initial setup 16
4Use your TV 17
Switching on your TV and putting it in Standby mode 17
Adjusting volume 17
Switching channels 17
Watching channels from an external device 18
Changing picture and sound settings 18
Sleep timer 18
Freeze mode 18
Switching audio mode 18
fun-Link options 19
Changing picture format 19
TV screen information 20
5 Use more of your TV 21
Displaying the Main Menu 21
Picture 22
Sound 23
Setup 23
Autoprogram 23
Channel list 24
Add channels 24
Antenna confirmation 24
Features 25
Caption settings 25
Child and ratings lock 26
Channel lock 26
Setting US Movie and TV Ratings 27
Canadian English or Canadian French Ratings 28
Change PIN 28
PC settings 28
fun-Link (HDMI CEC) 29
Device list 29
Setting your Location to Home 30
E-sticker 30
Language 30
USB 31
Picture (JPEG) 31
Video (Motion JPEG) 31
6 Upgrade your TV software 32
Checking your current software version 32
Upgrading the software 32
7 Useful tips 33
FAQ 33
Troubleshooting 34
8 Information 35
Glossary 35
Maintenance 35
9 Specifications 36
10 Warranty 37
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register online at www.magnavox.com/support to ensure:
Visit our World Wide Web Site at www.magnavox.com/support
Register online at www.magnavox.com/support today
to get the very most from your purchase.
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY
CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions –
new and old- must be supported on proper stands or installed
according to the manufacturer’s recommendations. Televisions
that are inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests, carts, etc., may fall over,
resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the
safe installation of your television.
• ALWAYS read and follow all instructions for proper use of
your television.
• NEVER allow children to climb on or play on the television or
the furniture on which the television is placed.
• NEVER place the television on furniture that can easily be used
as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be pushed,
pulled over or knocked down.
• ALWAYS route cords and cables connected to the television
so that they cannot be tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional installation if
you have any doubts about your ability to safely mount your
television.
• ALWAYS use a mount that has been recommended by the
television manufacturer and has a safety certification by an
independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and
mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are
mounting the television is appropriate. Some mounts are not
designed to be mounted to walls and ceilings with steel studs
or cinder block construction. If you are unsure, contact a
professional installer.
• Televisions can be heavy. A minimum of two people is
required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW
PLACE IN YOUR HOME
• Many new television buyers move their older CRT televisions
into a secondary room after the purchase of a flat-panel
television. Special care should be made in the placement of
older CRT televisions.
• ALWAYS place your older CRT television on furniture that is
sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser where
children may be tempted to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang
over the edge of your furniture.
CE.org/safety
3
English
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart / apparatus combination to avoid injury
from tip-over.
• The recommended Wall Mount Bracket Kit (sold separately)
allows the mounting of the TV on the wall.
• For detailed information on installing the wall mount, refer to the
Wall Mount Instruction Book.
• Funai is not responsible for any damage to the product or injury
to yourself or others if you elect to install the TV Wall Mount
Bracket or mount the TV onto the Bracket on your own.
• The Wall Mount Bracket must be installed by experts.
Funai is not liable for these types of accidents or injury noted below.
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall Mount
Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their specified
length. If screws too long are used this may cause mechanical or
electrical damage inside the TV set. If screws too short are used
this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may damage
the product or cause the product to fall, leading to an injur y.
• For safety reasons use 2 people to mount the TV onto a Wall
Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket while
your TV is plugged in or Turned On. It may result in an electrical
shock injury.
When installing the unit on the wall, allow this much space.
Top: 11.8 inches (30cm)
Left and right side: 5.9 inches (15cm)
Bottom: 3.9 inches (10cm)
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC − National
Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
GROUND CLAMPS
ANTENNA DISCHARGE
UNIT (NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Wall Mount Bracket Kit
Brand: SANUS
Screw dimension
50ME313V / 46ME313V PLA50B M6 x 0.787” (20mm)
SAN25BB M4 x 0.472” (12mm)
40ME313V / 39ME313V /
39ME413V
SAN18B M4 x 0.472” (12mm)
32ME403V / 32ME303V /
29ME403V
24ME403V
MST15 M4 x 0.472” (12mm)
Model #
Important Safety Instructions
English
4
MAGNAVOX is a registered trademark of Philips North America
Corporation and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license from Philips North America.
Funai reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this Owner’s Manual is believed adequate for the
intended use of the system. If the product or its individual modules or
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitability must be obtained. Funai
warrants that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors repor ted to Funai will be adapted and published on
the Funai support website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural proper ty of the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this Owner’s Manual, any
adjustments or assembly procedures not recommended or authorized
in this Owner’s Manual shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B Digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician
for help.
Declaration of Conformity
Trade Name : MAGNAVOX
Responsible Party : FUNAI CORPORATION, Inc.
Model :
50ME313V, 46ME313V, 39ME313V, 39ME413V,
32ME303V, 32ME403V, 29ME403V, 24ME403V
Address : 19900 Van Ness Avenue, Torrance, CA
90501 U.S.A.
Telephone Number : 1 866 341 3738
Modifications
This apparatus may generate or use radio frequency energy. Changes
or modifications to this apparatus may cause harmful interference
unless the modifications are expressly approved in the Owner’s Manual.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canadian notice
This Class B Digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.
Copyright
All other registered and unregistered trademarks are the proper ty of
their respective owners.
Consumer Notice:
This TV has been set to maximize energy efficiency while delivering the
best possible picture using the factory installed home mode settings.
Changing or enabling other features in this TV (e.g. brightened
backlighting) will possibly increase energy consumption beyond the
original ENERGY STAR
®
qualified limits.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing
for children younger than two years of age.
© 2012 Funai Electric Co., Ltd. All rights reserved.
No part of this Owner’s Manual may be reproduced, copied,
transmitted, disseminated, transcribed, downloaded or stored in any
storage medium, in any form or for any purpose without the express
prior written consent of Funai. Furthermore, any unauthorized
commercial distribution of this Owner’s Manual or any revision hereto is
strictly prohibited.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
ENERGY STAR® is a joint program of the U.S.
Environmental Protection Agency and the U.S.
Department of Energy helping us all save
money and protect the environment through
energy efficient products and practices.
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
TruSurround XT
®
creates a truly immersive
surround sound experience with rich bass and
clear dialog from only two speakers.
English
5
1Notice
• Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
• Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
• Install the unit in a horizontal and stable
position.
• Do not install the unit in direct sunlight
or in a place subject to dust or strong
vibration.
• Depending on the environment, the temperature of this unit may
increase slightly. This is not a malfunction.
• Avoid a place with drastic temperature changes.
• Do not place anything directly on top or bottom of the unit.
• Depending on your external devices, noise or disturbance of the
picture and / or sound may be generated if the unit is placed too
close to them. In this case, please ensure enough space between
the external devices and the unit.
• Do not insert the AC power cord into the power socket outlet
before all the connections are made.
• Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
• Before you move the TV, disconnect attached cables to prevent
damage to connectors.
• Be sure to unplug the AC power cord from the AC outlet before
moving or carrying the unit.
Do not place the unit on the furniture that is capable of being tilted
by a child and an adult leaning, pulling, standing or climbing on it.
A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to turn the unit on and go into standby mode.
To completely turn Off the unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the unit off when trouble is found or
not in use. The AC plug shall remain readily available.
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
WARNING: To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with the
instructions. Tipping, shaking, or rocking the unit may
cause injury / death.
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit -
www.magnavox.com
Magnavox pays a lot of attention to produce environment-friendly
products in green focal areas. Your new TV contains materials which can
be recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
End of life directives
AC plug
English
6
2Important
Positioning the TV
Environmental care
Regulatory notices
3Get started
Note
AAA
AAA
Model Quantity Size
50ME313V /
46ME313V
8 M4 x 0.472”(12mm)
40ME313V /
39ME313V
3 M4 x 0.787”(20mm)
39ME413V
3 M4 x 0.393”(10mm)
4 M4 x 0.787”(20mm)
32ME303V /
32ME403V /
29ME403V /
24ME403V
3 M4 x 0.551”(14mm)
Digital TV operation
Analog/Cable TV operation
English
7
Features
• DTV / Analog TV / CATV
You can use your remote control to select channels which are broadcast in Digital
format and conventional Analog format. Also, cable subscribers can access their cable
TV channels.
• Information display
You can display the title, contents (DTV only) and other information of the current
program on the TV screen.
• Autoprogram
This unit automatically scans and memorizes channels available in your area, eliminating
difficult setup procedures.
• Child lock
This feature allows you to block children’s access to inappropriate programs.
• Closed Caption decoder
Built-in Closed Caption decoder displays text for Closed Caption supported programs.
• MTS / SAP tuner
Audio can be selected from the remote control.
• Auto Standby
If there is no Input signal and no operation for 15 minutes, the unit will go into Standby
mode automatically.
•Sleep timer
You can set the unit to go into Standby mode after a specific amount of time.
• Choices for on-screen language
Select your on-screen language: English, Spanish or French.
• Stereo sound function
• PLL frequency synthesized tuning
Provides free and easy channel selection and lets you tune directly to any channel using
the number and decimal point “•” buttons on the remote control.
• Various adjustment for picture and sound
Customizes image quality suitable for your room and sets your sound preference.
• fun-Link via HDMI link
fun-Link allows your other HDMI link devices to be controlled by the HDMI cable
connected to your TV.
• HDMI Input
• HDMI-DVI Input
If your video device has DVI Output jack, use an HDMI-DVI conversion cable to
connect the unit.
• Component Video Input
• PC Input
•AV Input
•USB terminal
The picture (JPEG) and video (Motion JPEG) files stored on a USB Memory Stick can
be played back on this unit.
• Digital Audio Output
• Headphone Audio Output
Supplied accessories
Owner’s Manual Quick Start guide
Remote Control and
batteries
(AAA, 1.5V x 2)
Screws packed with this unit.
Cable management tie*
TV base and screws
* 46ME313V / 39ME413V only.
• If you lose the screws, please purchase the above-mentioned Phillips head screws at
your local store.
• If you need to replace these accessories, please refer to the part name or No. with the
illustrations and call our toll free customer suppor t line found on the cover of this
Owner’s Manual.
When using a universal remote control to operate this unit.
• Make sure the component code on your universal remote control is set to our brand.
Refer to the instruction book accompanying your remote control for more details.
• We do not guarantee 100% interoperability with all universal remote controls.
Symbols used in this Owner’s Manual
The following is the description for the symbols used in this Owner’s
Manual. Description refers to:
• If neither symbol appears, the operation is applicable to both.
English
× 4 [50ME313V / 46ME313V]
×
3 [39ME413V: M4 x 0.393”(10mm)]
× 4 [50ME313V / 46ME313V]
×
4 [39ME413V: M4 x 0.787”(20mm)]
Note
Note
1
2
× 3
screw hole
rear of this unit
8
Stand assembly
(50ME313V / 46ME313V / 39ME413V only)
Attaching the base
You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction.
For large screen TVs, at least 2 people are required for these steps.
(50ME313V / 46ME313V / 39ME413V)
1
(40ME313V / 39ME313V / 32ME303V / 32ME403V / 29ME403V /
24ME403V)
1
2
• Make sure to use a table which can support the weight of this unit and is larger than
this unit.
• Make sure the table is in a stable location.
• When attaching the base, ensure that “FRONT” with “arrow” written on the bottom
2
of the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.
• When attaching the base, ensure that all screws are tightly fastened. If the base is not
properly attached, it could cause the unit to fall, resulting in injuries as well as damage
to the unit.
• To remove the base from this unit, unscrew the Phillips head screws in step 2.
Be careful not to drop the base when you remove it.
Mounting the unit on your furniture
(40ME313V / 39ME313V / 39ME413V / 32ME303V / 32ME403V /
29ME403V / 24ME403V)
Screw this unit on your furniture tightly using wood screw (not supplied)
in the hole at the back of the base as shown.
• Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)
• When you remove this unit make sure to unscrew the wood screw from your Wood
Stand, Furniture and other wood item.
English
Note
9
Managing cables
Route your antenna cable and all other cables through the cable
management tie at the back of the TV.
(46ME313V / 39ME413V)
The holder helps keep your cables tidy and easily manageable.
1 Attach the cable management tie as illustrated below.
2 Pass cables through the cable management tie to avoid tangles.
Installing the remote control batteries
Slide the battery cover off the back of the remote control.
1
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −
ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
• Remove the batteries if not using the remote control for an extended period of time.
(39ME313V / 32ME303V)
Keep the cables through this holder to avoid tangling them.
10
a
j
l
m
p*
2
n
k
d
f
h
e
g
b
i
o*
2
50” - 39”
a
j
l
m
n
k
d
f
h
e
g
b
i
*1c
32” - 24”
Note
English
Remote control
a (POWER)
Turns the TV On from Standby or Off to Standby.
b PIC/SOUND MODE
Optimizes Picture and Sound quality.
1
c*
FREEZE
Freezes Screen image for 5 minutes.
d 0 − 9 (NUMBER buttons)
Used to enter a Channel / Program number.
• (DOT) Use with 0-9 to select digital channels. For example, to
enter 2.1, press
PREV.CH Returns to the previously viewed Channel.
CH + / − Selects a Channel.
e SAP
Selects Audio mode (MONO/STEREO/SAP) / Audio language.
f VOL + / −
Adjusts the Volume.
g (MUTE)
Turns the Sound On and Off.
h BACK
Returns to the previous Menu operation.
i ▲▼◄► (NAVIGATION buttons) / OK
Moves the cursor, Selects the On-screen Menu items.
j SOURCE
Selects Connected devices.
k SLEEP
Sets Sleep Timer.
l PICTURE SIZE
Adjusts the Picture size on the TV screen.
m INFO
Displays Information about the current program.
n MENU
Opens the Main On-screen Menu.
2
H / G Skips Backward or Forward Chapters, Titles or Tracks
o*
on a Disc.
E / D Searches Backward or Forward through the disc.
LINK Opens fun-Link options menu. ➟ p.29
C Stops the Disc playback.
F Pauses the Disc playback.
B Begins or Restarts the Disc playback.
• You must set On in the Device (➟ p.29) and fun-Link (➟ p.19) control to
p*
operate the above functions.
2
COLOR buttons
Use these Buttons according to the directions On-screen.
*132ME303V / 32ME403V / 29ME403V / 24ME403V only
2
*
50ME313V / 46ME313V / 40ME313V / 39ME313V / 39ME413V
only
11
50ME313V / 46ME313V
40ME313V / 39ME313V / 39ME413V / 32ME303V / 32ME403V / 29ME403V / 24ME403V
* When seen from the front.
*Keys on Rear.
Control Keys are
located on the Rear
side of the TV.
i
k
l
m
n
o
p
j
English
Control panel
fgh
hg
f
a VOL ◄/►
Adjusts the Volume. In the Menu screen, moves the Cursor Left
(◄) / Right (►).
VOL ◄ : Volume Down
VOL ► : Volume Up
b CH ▲/▼
Selects a Channel. In the Menu screen, moves the Cursor Up (▲) /
Down (▼).
c MENU
Opens the Main On-screen Menu.
d SOURCE
Selects Connected devices.
e (POWER)
edcba
Turns the TV On and Off.
f Remote Control Sensor
Receives IR signal from Remote control.
g Power On / Standby Indicator
(On : no light, Standby : red)
h Ambient Light Sensor
Alters the brightness of the TV screen automatically by detecting
your room lighting level. Do not block this Light Sensor window to
allow proper operation. (Only - 50ME313V / 46ME313V /
40ME313V / 39ME313V / 39ME413V)
edcba
Te r m i n a l s
i Digital Audio Output jack
Digital Audio (S/PDIF) Output to home theaters and other Digital
Audio systems.
j Component (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks
for VIDEO
Composite Video Input (VIDEO) jack is a shared jack with
Component Video Input (Y) jack.
k Analog Audio (L/R) Input jacks
Connect Analog Audio signals from;
– HDMI-DVI / Analog Audio (L/R) jacks signal
– Component Video / Analog Audio (L/R) jacks signal
– Composite Video / Analog Audio (L/R) jacks signal
– PC Connection / Analog Audio (L/R) jacks signal with Stereo mini
3.5mm plug Audio cable on PC
l HDMI Input jack(s)
Digital audio and video Input from high definition Digital devices
such as DVD / Blu-ray disc players, cable / satellite set-top boxes
PC’s.
m PC Input jack
VGA cable connection for PC.
n USB terminal
Data Input from USB Memory Stick only.
Do not connect any device to this terminal such as; Digital camera,
keyboard, mouse, etc.
o 75 ohm Cable / Antenna connection
Signal Input from an antenna or cable / satellite set-top boxes.
p Headphone Audio Output jack
Headphone 3.5mm stereo jack for personal listening.
12
INININ
OUT
cable
RF cable
antenna
IN
INININ
OUT
antenna
RF cable
set-top box
RF cable
IN
INININ
OUT
RF cable
set-top box
HDMI cable
IN
OUTOUTOUT
IN
ININ
IN
ININ
OUT
OUTOUT
Component (Y/Pb/Pr) video cables
Audio (L/R) cables
set-top box
RF cable
Note
Caution
Note
INININ
OUT
OUT
OUTOUT
OUT
OUTOUT
IN
ININ
IN
OUT
IN
set-top box
Blu-ray disc/DVD recorder
RF cable
Audio (L/R) + Video cables
Audio (L/R) +
Video cables
RF cable
cable
English
Connecting the antenna or the cable
Be sure your antenna or other device is connected properly before
plugging in the AC power cord.
If you connect to an antenna through RF cable
Any DTV programs that are broadcasted in your area can be received
for free through an antenna connection.
If you connect a set-top box through RF cable
If the TV is connected to a cable / satellite set-top box via a coaxial
connection, set the TV to channel 3, 4 or the channel specified by the
service provider.
Connecting a Set-top Box, Blu-ray / DVD Recorder via
Composite connectors and Analog Audio
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
• If you have any question about the DTV’s antenna, visit www.antennaweb.org for
further information.
• Depending on your antenna system, you may need different types of combiners
(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on
these devices is 2,000MHz or 2GHz.
• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable
from the antenna Input jack before moving the unit.
• If you did use an antenna to receive Analog TV, it should also work for DTV reception.
Outdoor or attic antennas will be more effective than a set-top box or inside antenna.
• To Turn On your reception source easily between antenna and cable, install an
antenna selector.
• If you are not receiving a signal from your cable service, contact the Cable provider.
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
If connecting a Set-top Box through an HDMI cable
If the TV is connected to a Cable or Satellite Set-top Box via an HDMI
cable, make sure you select the correct Source by using SOURCE.
If you connect a set-top box through Component Video Input
If the TV is connected to a cable / satellite set-top box via Component
Video Input, make sure you select the correct Component Video Source
by using SOURCE.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet
after all the necessary connections are made.
• Do not connect the AC power cord to a power supply outside the indicated voltage
of this unit (AC 120V).
• Connecting the AC power cord to a power supply outside of this range may result in
fire, smoke, unit failure or electrical shock.
• Each time you plug in the AC power cord, no operations will be performed for a few
seconds. This is not a malfunction.
Loading...