Magellan RoadMate 300 Operating Instructions
Magellan®
Reference Manual
RoadMate
™
Instructions for Operating the
Magellan RoadMate 300
***
The Magellan RoadMate 300 is a vehicle-navigation aid designed to assist you in arriving at your
selected destinations. When using the Magellan RoadMate, these safety rules must be followed
to prevent accidents that can result in injury or death to yourself or others:
• When driving, the need to view the display is minimal. Voice prompts will guide you to
your destination. The driver should enter data or program the unit only when the vehicle is
stopped. Only a vehicle passenger should enter data or program the unit while the vehicle
is moving.
• It is your responsibility to comply with all traffic laws.
• While every attempt is made to ensure that the database is accurate, roadways, points of
interest, and business and service locations may change over time. The database does not
include, analyze, process, consider, or reflect any of the following: legal restrictions (such
as vehicular type, weight, height, width, load and speed restrictions); road slope or grade;
bridge height, width, weight, or other limits; population density; neighborhood quality or
safety; availability or proximity of law enforcement, emergency rescue, medical, or other
assistance; construction work zones or hazards; road or lane closures; road, traffic, or
traffic facilities’ safety or condition; weather conditions; pavement characteristics or
conditions; special events; traffic congestion. It is your responsibility to disregard any
unsafe, hazardous, or illegal route suggestions.
IMPORTANT SAFETY WARNINGS
***
• Keep the Magellan RoadMate safe from extreme temperature conditions. For example, do
not leave it exposed to direct sunlight for an extended period of time.
• Laws in some states prohibit wearing stereo headphones while operating a motor vehicle.
Please contact your state’s Department of Motor Vehicles for information.
•Take care when mounting the unit in your vehicle, whether using the windshield mount or
other mount or accessories, that it does not obstruct the driver's view of the road, interfere
with the operation of the vehicle's safety devices such as air bags, or present a hazard to
occupants of the vehicle should the unit be dislodged while driving. You assume the risks
associated with damage to your vehicle or vehicle occupants as the result of your choices
in mounting the unit.
• Please refer to the Read Me First document supplied with your Magellan RoadMate for
installation instructions.
© 2004 Thales Navigation, Inc. All rights reserved. The Magellan Logo, Magellan, RoadMate,
Turn it on and go, TrueView, TrueFix, and QuickSpell are trademarks of Thales Navigation. No
part of this user manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, for any purpose other than the
purchaser’s personal use, without the prior written permission of Thales Navigation.
631176-01B
Table of Contents
Information ...................................................................................................................................1
About Satellite Navigation......................................................................................................................... 1
How Satellite Navigation Works ................................................................................................................. 1
Line of Sight ........................................................................................................................................ 1
Precision .............................................................................................................................................. 2
A Word on the Safe Usage of GPS Maps..................................................................................................... 3
From Source to Destination .................................................................................................................... 3
GPS Maps and Your Safety .................................................................................................................... 3
Magellan RoadMate ......................................................................................................................4
Magellan RoadMate 300........................................................................................................................... 4
Front View ............................................................................................................................................ 4
Rear View ............................................................................................................................................. 4
Left- and Right-Side Views .................................................................................................................... 5
Bottom View ........................................................................................................................................ 5
Secure Digital (SD) Cards ..............................................................................................................6
Secure Digital (SD) Cards ......................................................................................................................... 6
To Insert the SD Card: ........................................................................................................................... 6
To remove the SD card: ......................................................................................................................... 6
SD Card-Authorization Options ............................................................................................................... 7
Installation .................................................................................................................................12
Vehicle Installation ................................................................................................................................ 12
Installation with the Windshield Mount ................................................................................................. 12
Installing the External Antenna ............................................................................................................. 13
Magellan RoadMate Manager Application ................................................................................................. 15
Installation ......................................................................................................................................... 15
Maps and Data ...........................................................................................................................17
Basemaps vs. Detailed Map .................................................................................................................... 17
Data Storage and Access ........................................................................................................................ 17
Basemap Routing vs. Detailed Map Routing.............................................................................................. 19
Routing Between Regions ....................................................................................................................... 20
Basic Operation ..........................................................................................................................22
Turning the Magellan RoadMate On ......................................................................................................... 22
Inputting Text Characters........................................................................................................................ 22
Additional Characters (More)................................................................................................................... 23
Numerical Characters (123).................................................................................................................... 23
Using QuickSpell®................................................................................................................................. 23
What Is QuickSpell? ............................................................................................................................ 23
The Magellan RoadMate Manager Application........................................................................................... 25
Maps .........................................................................................................................................27
Map Screen........................................................................................................................................... 28
Toolbar .............................................................................................................................................. 28
Map Window ....................................................................................................................................... 28
Overview Window ................................................................................................................................ 28
Saved Regions List .............................................................................................................................. 29
Help Window ...................................................................................................................................... 29
Upload Information Window ................................................................................................................. 29
Working with Regions ............................................................................................................................. 29
Loading Regions from the PC ............................................................................................................... 29
Drawing Regions ................................................................................................................................. 30
Viewing a Region ................................................................................................................................ 31
Deleting Regions ................................................................................................................................. 32
Uploading Maps to Internal Memory ...................................................................................................... 33
Deleting Maps from Internal Memory .................................................................................................... 34
Uploading Maps to an SD Card ............................................................................................................. 35
User Settings ..............................................................................................................................37
Settings Screen ..................................................................................................................................... 38
Setting the User Preferences................................................................................................................... 40
Table of Contents
Saving a Settings File to Your Computer ................................................................................................ 40
Opening a Settings File from Your Computer .......................................................................................... 40
Uploading the Settings ........................................................................................................................ 40
Address Book .............................................................................................................................41
Address Book Screen.............................................................................................................................. 42
Toolbar .............................................................................................................................................. 42
Detail Map Window ............................................................................................................................. 42
Overview Map Window ......................................................................................................................... 42
Saved Addresses List ........................................................................................................................... 43
Help Window ...................................................................................................................................... 43
Upload Information Window ................................................................................................................. 43
Using the Address Book.......................................................................................................................... 43
Load an Address List from Your Computer ............................................................................................. 43
Saving Your Address List to Your Computer ............................................................................................ 44
Adding an Address on the Map ............................................................................................................. 45
Add Custom Address ........................................................................................................................... 46
Add a POI as an Address ..................................................................................................................... 47
Viewing an Address on the Map ............................................................................................................ 48
Deleting an Address from the List ......................................................................................................... 49
Uploading Addresses to your Magellan RoadMate ................................................................................... 49
Trip Planner ...............................................................................................................................50
Trip Planner Screen ............................................................................................................................... 51
Toolbar .............................................................................................................................................. 51
Detail Map Window ............................................................................................................................. 51
Trip List ............................................................................................................................................. 51
Address Book ..................................................................................................................................... 52
Help Window ...................................................................................................................................... 52
Upload Information Window ................................................................................................................. 52
Using theTrip Planner............................................................................................................................. 52
Load a Trip from Your Computer ........................................................................................................... 52
Saving a Trip File to Your Computer ...................................................................................................... 53
Adding Points on the Map .................................................................................................................... 54
Adding an Address from the Address List to an Existing Trip ................................................................... 55
Creating a New Trip From the Address Book .......................................................................................... 57
Creating a New Trip with a Custom Address ........................................................................................... 58
Renaming a Trip ................................................................................................................................. 61
Creating a New Trip with a POI ............................................................................................................. 62
Viewing a Trip ..................................................................................................................................... 64
Uploading Trips to your Magellan RoadMate .......................................................................................... 64
Track Replay ..............................................................................................................................65
Track Replay Screen............................................................................................................................... 66
Toolbar .............................................................................................................................................. 66
Track Information ............................................................................................................................... 66
Track Points ....................................................................................................................................... 67
Elevation Profile ................................................................................................................................. 67
Help Window ...................................................................................................................................... 67
Using the Track Replay........................................................................................................................... 67
Loading a Track File from the Unit ........................................................................................................ 67
Load a Track from Your Computer ......................................................................................................... 68
Save a Track to Your Computer ............................................................................................................. 69
Track Playback ................................................................................................................................... 70
Moving and Adding Track Points ........................................................................................................... 71
Deleting and Viewing Track Points ........................................................................................................ 73
Set the Date and Time of a Track Point ................................................................................................. 74
Viewing the Current Track .................................................................................................................... 75
Clearing the Current Track. .................................................................................................................. 75
Selecting Destinations ................................................................................................................77
Choosing the Route Method .................................................................................................................... 78
Table of Contents
Basemap Routing................................................................................................................................... 79
Selecting a Point on the Map ............................................................................................................... 79
Search BaseMap City .......................................................................................................................... 80
Accessing Map Files............................................................................................................................... 81
Switching Map Files ............................................................................................................................ 81
Switching SD Cards ............................................................................................................................. 82
Selecting a Destination Using “Select Address” ........................................................................................ 84
Select Address .................................................................................................................................... 84
Selecting a Destination Using “Address Book”.......................................................................................... 86
Address Book: Previous Destinations ..................................................................................................... 86
Previous Destinations – Save to your Address Book ..............................................................................87
Address Book: List Addresses ............................................................................................................... 88
List All ............................................................................................................................................ 88
List Favorites ................................................................................................................................... 90
Search Address Book ........................................................................................................................ 92
Address Book: Create New Entry ........................................................................................................... 94
Select on Map ................................................................................................................................. 94
Select Address ................................................................................................................................. 96
Dining, ATM, Gas... .......................................................................................................................... 98
Intersection ................................................................................................................................... 104
Address Book: Trip Planner ................................................................................................................ 107
Guide Me ...................................................................................................................................... 107
New .............................................................................................................................................. 108
Edit .............................................................................................................................................. 110
Delete, Rename ............................................................................................................................. 111
Selecting a Destination Using “Dining, ATM, Gas...” ............................................................................... 114
Dining, ATM, Gas...: Search POI by Name ........................................................................................... 114
Dining, ATM, Gas...: Search Nearest POI ............................................................................................. 115
Current Position ............................................................................................................................. 115
By City Center ................................................................................................................................ 116
By Airport ...................................................................................................................................... 118
Dining, ATM, Gas...: Search BaseMap City .......................................................................................... 120
Selecting a POI on the Map ............................................................................................................... 121
Selecting a Destination Using “Intersection” .......................................................................................... 122
Traveling ..................................................................................................................................124
Guidance Information Screens .............................................................................................................. 124
Map Screen ...................................................................................................................................... 125
Changing the Map Zoom Levels .......................................................................................................... 125
Maneuver List Screen ........................................................................................................................ 126
TrueView Screen ............................................................................................................................... 126
Route Changes .................................................................................................................................... 127
Detouring from the Planned Route ...................................................................................................... 127
Excluding a Maneuver in a Planned Route ........................................................................................... 127
Canceling a Planned Route ................................................................................................................ 128
Changing the Route Method ............................................................................................................... 128
Current Location .................................................................................................................................. 130
Displaying Information About Your Current Location ............................................................................. 130
Save Location ................................................................................................................................... 130
User Options .............................................................................................................................131
User Option Menu................................................................................................................................ 131
Trip Computer ..................................................................................................................................... 132
Stopping or Starting the Trip Computer ............................................................................................... 132
Saving the Current Trip Report ........................................................................................................... 132
Resetting the Trip Computer .............................................................................................................. 133
Viewing a Saved Trip Report ............................................................................................................... 133
Deleting a Trip Report ....................................................................................................................... 134
Track Recorder .................................................................................................................................... 135
Start Track Recorder ......................................................................................................................... 135
Table of Contents
Stop Track Recorder .......................................................................................................................... 135
Save Track Record ............................................................................................................................ 136
View Track ....................................................................................................................................... 137
Delete, Rename Track ....................................................................................................................... 138
Configuration....................................................................................................................................... 140
Brightness ........................................................................................................................................ 140
Volume ............................................................................................................................................ 140
Auto Power Off ................................................................................................................................. 141
Language ......................................................................................................................................... 141
User Settings....................................................................................................................................... 142
POI Selection ................................................................................................................................... 142
Map Options ..................................................................................................................................... 143
Select Map Color .............................................................................................................................. 143
Route Preferences ............................................................................................................................. 144
Split TrueView .................................................................................................................................. 144
Menu Colors ..................................................................................................................................... 145
Tone Options .................................................................................................................................... 146
Diagnostics ...................................................................................................................................... 146
Search by Street ............................................................................................................................ 147
Search BaseMap City ...................................................................................................................... 149
Simulator Mode ............................................................................................................................. 149
User - Edit Name .............................................................................................................................. 151
Password Settings ............................................................................................................................. 151
Information
Information
About Satellite Navigation
Global satellite navigation is an exciting technology, providing enhanced productivity and accuracy in a vast number
of industries. It adds a new level of enjoyment and safety to a wide range of navigation, sports, and recreational
activities.
A Global Navigation Satellite System (GNSS) is a network of satellites that transmit high-frequency radio signals
containing time and distance data that can be picked up by a receiver, allowing users to pinpoint their precise
locations anywhere around the globe.
There are two Global Navigation Satellite Systems in operation: the U.S. Global Positioning System (GPS) and the
Russian GLObal NAvigation Satellite System (GLONASS). These systems are constantly being upgraded to meet
higher standards of reliability. A third GNSS named GALILEO, after the Italian astronomer of the early 1600s, is
being developed in Europe specifically to provide a higher standard of integrity and reliability, required to ensure the
safety of lives during transport by air, land and sea, without the use of additional augmentation systems.
While the GPS and GLONASS satellite networks are being developed to achieve maximum performance, SatelliteBased Augmentation Systems (SBAS) have been established to provide improved accuracy. SBAS provides
differential signal corrections for GPS and GLONASS transmissions with the use of ground stations and
geostationary satellites in specific regions. This is GNSS-1, the first phase in establishing the required integrity for
high-precision satellite navigation.
GNSS-2 requires the launching of new satellites into orbit and a complete upgrade of the existing satellite systems.
This second phase is already well underway. GALILEO, scheduled to begin service in 2008, is being developed to
meet the standards of GNSS-2 for rapid and reliable, certified precision positioning.
How Satellite Navigation Works
Global navigation satellites continuously transmit time and distance information as they orbit the earth in a precise
formation. Navigation satellite receivers use this information to calculate an exact location through triangulation.
Every point on Earth is identified by two sets of numbers called coordinates. These coordinates represent the exact
point where a horizontal line, known as latitude, crosses a vertical line, known as longitude. The receiver locks on to
at least three satellites and uses the information received to determine the coordinates of the receiving device.
By comparing the time the signals were transmitted from the satellites and the time they were recorded, the receiver
calculates how far away each satellite is. The distance of the receiver from three or more satellites reveals its
position on the surface of the planet. With these distance measurements, the receiver might also calculate speed,
bearing, trip time, distance to destination, altitude, and more.
The satellite-navigation device may display its position as longitude/latitude, Universal Transverse Mercator (UTM),
Military Grid (MG), or simply as a point on an electronic map. Many Thales Navigation receivers provide
comprehensive mapping data, making satellite navigation an easy tool to enhance your recreational and industrial
activities.
Line of Sight
Satellite-navigation receivers operate by line of sight with global-positioning satellites. This means that at least three
satellites must be in “view” of a receiver in order to calculate longitude and latitude. A fourth satellite must also be
within line of sight to calculate altitude. On average, eight satellites are continuously within line of sight of every
position on Earth; the more satellites in view, the more accurate the positioning.
Though the radio signals of navigation satellites will pass through clouds, glass, plastic, and other lightweight
materials, satellite-navigation receivers will not work underground or in other enclosed spaces.
1
Information
Precision
On average, a satellite-navigation receiver is accurate to within 15 meters. Thales Navigation employs several
technologies to increase the accuracy of their professional and Magellan®-branded receivers. An accuracy of 3
meters or better is achieved using correction signals from satellite navigation-augmentation systems. In the U.S., an
accuracy of 3 meters is achieved using signal corrections from a network of ground stations and fixed-position
satellites known as WAAS (Wide-Area Augmentation System). Throughout Europe a similar system, EGNOS
(European Geostationary Navigation Overlay System), provides the same accuracy. In Asia, satellite navigationsignal correction is provided by MSAS (Multifunctional Transport Satellite-based Augmentation System). Other ways
to increase the accuracy of satellite navigation include the use of DGPS (Differential Global-Positioning System);
ground relay stations, set at known positions, transmit corrected satellite-navigation signals. Various methods and
applications of DGPS can increase satellite navigation accuracy from a few meters to within a few millimeters. Using
DGPS requires a differential-beacon receiver and antennae in addition to a satellite-navigation device. Accuracy can
also be increased using an RTK (Real-Time Kinematic) satellite-navigation system. This is a receiver capable of
transmitting a phase-corrected signal from a known position to one or more rover receivers.
A number of positioning errors can occur, limiting accuracy to within 15 to 25 meters. These errors are monitored
and compensated for in a number of ways:
Orbiting errors -- Occasionally a satellite's reported position does not match its actual trajectory. In the U.S., the
Department of Defense continuously monitors each satellite, making orbital corrections with onboard booster
rockets.
Poor geometry -- If all of the satellites within line of sight of a receiver are clustered closely together, or lined up
relative to the position of the receiver, the geometric calculations necessary for triangulating a position become
difficult and less reliable. The use of differential-correction signals from satellite-based augmentation systems or
DGPS can compensate for both orbital errors and poor geometry.
Multipath signals -- Signals may be reflected off tall buildings or other obstructions before reaching the receiver,
increasing the distance a signal travels and reducing accuracy.
Thales Navigation receivers make a number of complex mathematical calculations to effectively compensate for
other potential errors in positioning:
Atmospheric delay -- Satellite-navigation signals slow as they pass through the Earth's atmosphere. Thales
Navigation receivers calculate the average delay in nanoseconds to compensate.
Clock errors -- The clock built into a receiver is not as accurate as the atomic clock on a navigation satellite, which
is accurate to one second every million years. Each Thales Navigation receiver compensates for time differentials by
comparing the time signals of several satellites and adjusting its calculations and its clock to match.
2
Information
A Word on the Safe Usage of GPS Maps
Just like paper maps, maps on GPS devices vary greatly in terms of information included and visual presentation.
Whether topographical maps, roadmaps or marine charts, each map and the data it presents is designed for a
specific purpose. For example, marine charts will often present only a minimal representation of roadways and are
not a substitute for street maps. Topographic maps usually provide minimal detail about bodies of water, and do not
contain marine navigational markers.
Maps also vary widely in scale: the smaller the scale, the more detailed the map. Therefore, when using GPS maps
(just as with paper maps) it is important to consider what type of map you are using in your explorations and to use
common sense.
From Source to Destination
Thales Navigation, maker of Magellan GPS products, is not a cartography company. We do not create the maps that
are used on our GPS devices. We seek to acquire map data from the best public and private sources available at the
time of publication. Thales Navigation licenses* topographical maps, roadmaps, marine charts and points of interest
data from commercial and governmental cartographic sources that provide raw map data. Thales Navigation
processes and compresses the raw data into a format that makes it presentable and manageable to work on our GPS
devices. And to ensure that our map data is as robust as possible, data from multiple sources are often combined to
provide a better user experience for our customers. This processing does not alter the landforms, coordinates or
other spatial data that comes in the raw data. The accuracy of the maps is fundamentally dependent on the source
data used to create them. Map data changes frequently due to both natural and manmade causes. As a result,
governmental and commercial cartography companies must continuously review correct and improve upon their map
data. We release new versions of our maps on a regular basis to reflect these changes.
After processing the data, we test the compatibility of the map with our GPS devices to ensure that the products we
release work properly on our GPS devices. We also beta test our products to get customer feedback prior to release.
GPS Maps and Your Safety
Remember, your GPS device is an aid to navigation. It must be used with common sense and it is important that
users interpret GPS map data with a critical eye. Landscapes and roads change or may be impassable, trees and tall
buildings can obscure GPS signals and your GPS device may not always reflect the complete picture. When using
GPS, you must combine the information provided by your GPS map with your relevant local knowledge, road
signage, buoys, depth soundings and changing local conditions to generate a complete understanding of your
situation.
It is your responsibility to ensure compliance to all traffic laws, including pedestrian observance of crosswalks, and
to use good judgment while operating the Magellan GPS receiver. Safety must be your primary concern. The
Magellan GPS receiver must not be used while engaged in any activity requiring the user's full attention to the
environment. For instance, the Magellan GPS receiver should be operated only by vehicle passengers or by the
driver when the vehicle has come to a complete stop. The driver must not attempt to view the display while driving.
A climber must not attempt to view the display while negotiating treacherous terrain. Disregard any unsafe,
hazardous or illegal route suggestions.
Magellan maps do not include, analyze, process, consider or reflect any of the following: legal restrictions (such as
weight, height, width, load and speed restrictions); road slope or grade; bridge height, width, weight or other limits;
population density; neighborhood quality or safety; availability or proximity of law enforcement, emergency rescue,
medical or other assistance; construction work zones or hazards; road, sidewalk or waterway closures or conditions;
weather conditions; pavement characteristics or conditions; special events; traffic congestion; time of day.
*Thales Navigation licenses map data from governmental sources such as, but not limited to, US Geological Survey
(USGS), the National Oceanic and Atmospheric Administration (NOAA-NOS) and the Canadian Hydrographic
Service (CHS). Thales Navigation licenses map data from commercial cartography companies such as Navigation
Technologies, Navionics, DMTI and C-Map.
3
Front View
Magellan RoadMate
Magellan RoadMate
Magellan RoadMate 300
1 Power Press to turn the Magellan RoadMate on or off.
2 Zoom In While viewing the map, press to enlarge the map view
3 Zoom Out While viewing the map, press to shrink the map view
4 View Switch between Map, Maneuver List, and TrueView
5 Locate Show details of your current location and save it to your address book
6 Option Access customizable features
7 Cancel Cancel changes and selections
8 Enter
9 Navigation Key Select menu options, characters, and pan map
Confirm menu selections and text input, repeats last voice prompt during
routing while on the Map Screen
Rear View
1 Antenna Rotate up when in use to receive signals from the GPS satellite network
4
Magellan RoadMate
Left- and Right-Side Views
1 USB Connection Connect to your PC to upload map data or software updates
2 Power Connection Plug into your vehicle or at home
3 Headset Connection Plug in an earpiece for noisy areas
Bottom View
1 SD Card Slot Secured Digital (SD) Card slot (sold separately)
5
SD Cards
Secure Digital (SD) Cards
Secure Digital (SD) Cards
The Secure Digital (SD) card is a small, lightweight flash memory device that allows increased data storage for your
Magellan RoadMate. The compact size is ideal for storing large amounts of data and not taking a lot of physical space.
The SD card slot on your Magellan RoadMate employs what is called a “push-push” method of locking and releasing. In
other words, when you insert the card you must push it to lock it in, and to release it you must push it also. SD cards
come in a variety of sizes and manufacturers, please visit our web site at www.magellangps.com for a list of compatible
SD cards.
To Insert the SD Card:
Make sure the unit is off.
unit and the SD card.
1. Peel back the rubber gasket to expose the SD card slot. Do
not completely remove the rubber gasket.
The SD card can only be inserted in one direction. Do not force
the card into the slot.
2. Insert the SD card into the slot with the metal contacts going
in first and the beveled edge to the left.
3. Push the SD card into the slot. You will feel slight resistance.
Continue to push until you hear a click.
4. Replace the rubber gasket.
“Hot-Swapping” or changing cards with the power on is not supported and may damage the
To remove the SD card:
1. Peel back the rubber gasket to expose the SD card slot. Do
not completely remove the rubber gasket.
Do not attempt to pull the card out of the slot at this point.
2. Push the SD card into the slot as before until you hear a click.
Metal Contacts
Beveled Edge
3. Remove the SD card from the slot.
4. Replace the rubber gasket.
6
SD Cards
SD Card-Authorization Options
The Magellan RoadMate requires an SD card to be “authorized”. A card is authorized by using the serial number of the
card to generate and unlock code specifically for that card. This is so you cannot use faulty or poorly manufactured
cards in the unit and risk corrupting the data on the unit.
To find the serial number of the SD card:
1. Insert the card into the Magellan RoadMate.
2. Connect the unit to the PC using the USB cable and connect the power supply.
3. Start the Magellan RoadMate Manager application.
4. Select Memory Card Setup.
5. A dialog box will appear prompting your to make sure the unit
is off and and SD card is inserted. Turn the unit on and click on
Next
.
6. The serial number of the SD Card will be displayed along with
three options for proceeding. Please make sure to write the Serial
Number down in the space provided in this manual (see
page 11). Select “I do not have an Authorization Code” and click
on next.
7
SD Cards
7. SD Cards can be authorized for free in two ways:
Via the Internet
authorization code through the web” and click on
Your default internet browser will launch and take you to
Magellan’s Product Unlock Codes page. Select “Unlocking
an SD to use with your Magellan RoadMate 300”.
. Select “I would like to request an
Next
.
Click on
Enter your E-mail address and password. If you have not
registered previously, click on “Click here to create an
account” and follow the instructions on-screen to create a
new user account for yourself.
Continue
.
8
SD Cards
Select the type of SD card you wish to authorize. Next, enter
the serial number you wrote down. Continue to enter the
required information and click on
Your Unlock Code is displayed. Make sure you write down the
Unlock Code in the space provided in this manual.
Continue
.
Select the code in your browser. Right-click on the text and
select Copy.
Right-click on the empty field and select Paste or enter the
Unlock Code. Click on
Finish
.
9
SD Cards
You are now ready to upload maps to your SD card.
By Calling Customer Service
Select “I would like to request an Authorization Code by
phone/fax”. Select
The dialog box will display the phone number to call along
with the hours of operation. When you have received the
Unlock Code, write it down in the space provided in this
manual (see page 11). Click
Next
. Follow the directions as before.
.
Next
.
Enter the Unlock Code in the blank field. Click
Finish
10
.
SD Cards
You are now ready to upload maps to your SD card.
Print this page, and use the space provided to write down your serial number and unlock code.
SD Card Serial Number: ______________________________________________________
Unlock Code: _______________________________________________________________
SD Card Serial Number: ______________________________________________________
Unlock Code: _______________________________________________________________
SD Card Serial Number: ______________________________________________________
Unlock Code: _______________________________________________________________
11
Installation
Installation
Vehicle Installation
Take care when mounting the Magellan RoadMate in your vehicle, whether using the windshield mount or another
mount, that it does not obstruct the driver’s view of the road. Make sure that the placement of the Magellan RoadMate
and cable does not interfere with the operation of vehicle safety devices, such as air bags. You assume the risks
associated with damage to your vehicle or your vehicle’s occupants as a result of how you choose to mount the Magellan
RoadMate.
Installation with the Windshield Mount
Using a Phillips screwdriver, attach the mounting plate to the back of the Magellan
RoadMate with four screws until the screws are flush with the plate.
Slide the mount assembly onto the windshield mount bracket attached to the back
of the unit.
Press the windshield mount to the glass and rotate the locking dial until it clicks
into place.
Plug the power cable into the unit.
12
Installation
Plug the cigarette lighter connector into an appropriate 12V receptacle in your car.
Rotate the antenna upward.
Installation is complete. You are ready to turn the Magellan RoadMate on and go.
Installing the External Antenna
The external antenna (not included) provides faster satellite fix times and greater signal strength. Because it is mounted
outside of the vehicle, it is not affected by reflective coatings on windows and has an unobstructed line of sight to the
satellites.
Remove the standard antenna by rotating it completely upward.
Hold the antanna at the lower portion and pull straight off the back of the unit.
13
Installation
Plug the end of the external antenna into the socket on the back of the unit.
Attach the antenna to a flat portion of the roof of your vehicle. The antenna is
magnetic.
Do not use any adhesives to attach the antenna to your vehicle.
Route the antenna cable so it does not interfere with the operation of the vehicle.
14
Installation
Magellan RoadMate Manager Application
The Magellan RoadMate Manager is used to configure your personal settings, select and store detailed map regions,
and upload everything to your Magellan RoadMate.
This Application will guide you step by step through the installation process. Simply insert the CD into your computer’s
CD drive and the process will begin automatically. Follow the on-screen instructions to install the Magellan RoadMate
Manager Applications.
Installation
Insert CD #1 into you computer’s CD drive. The installation process will begin
automatically. If it does not start, go to your Windows Start menu and select Run, click
on the “Browse” button, select your CD drive, and select the setup.exe file. Start the
installation process by choosing a default language.
The Welcome Screen will appear. Click
Read the End User License Agreement. If you agree to the terms, Click on
Choose between a Full or Typical installation. The full installation requires about 1.4
gigabytes of disk space and will run faster. The Typical installation requires about 700
megabytes of disk space and requires the data CD (CD #2) to be in the computer’s CD
drive to run. Click
Next
.
Next
to continue.
Yes
.
Choose the destination for your software. This will tell the installation where to place the
files on your hard drive. Typically, it will create a Magellan directory under the Program
Files directory on your C drive. Click
Next
.
15
Installation
Choose a program folder. This tells the installation under which group of programs to
place the program icon. Typically, it will create a Magellan group and store the program
icon there. Click
The installation will begin.
The Installer will prompt you to insert CD #2 to continue the installation. Insert CD #2
and click OK.
Next
.
When the installation has completed, click
The installation has finished and you can launch the Magellan RoadMate
Manager Application. Double click on the Magellan RoadMate
Manager icon .
Finish
to exit the installer.
16
Maps and Data
Maps and Data
Basemaps vs. Detailed Map
A basemap contains major map features such as highways and city centers.
The basemap that is built into the Magellan RoadMate has basic detail
sufficient for generally orienting oneself to a broad geographic area. The
basemap is used when routing between detailed regions, or to a point on the
map (this will be explained later).
Detailed maps include all roads and highways, points of interest (POIs),
geographic features, railroads, and street addresses.
Data Storage and Access
Before we get into detail about how to upload maps to the Magellan RoadMate, it is important to understand how the
RoadMate stores and accesses the data. The unit stores the basemap and other files in it’s internal memory. After these
files, it still has about 80 megabytes left over to store customized detailed map files. Additionally, the Magellan
RoadMate can use SD (Secure Digital) cards to increase the capacity for storing map data. The Magellan RoadMate
RoadMate Manager (MRMM) software is used to transfer the data via the USB cable to the unit’s internal memory or the
SD card.
Detailed
Region 1
Detailed
Region 2
Detailed
Region 3
Internal Memory
SD Card
Map File
17
Maps and Data
You can save up to three detailed regions per map file and any number of map files to your unit or SD Card, up to the
unit’s available built-in memory or the size of the SD Card. For example, if you have 80 megabytes of built-in memory
available you can create one 80-megabyte region and save it to one map file, or you can save two 40 megabyte regions
to one map file, or you can save four 20-megabyte regions to two map files. You are however, limited to region sizes of
not more than 240 megabytes. For best results, when uploading map files to the internal memory of your Magellan
RoadMate or to an optional Secure Digital (SD) card, it is recommended that you limit the size of your map file to no
more than 80 MB. While you can upload any number of map files to your Magellan RoadMate (depending on available
memory), we also recommend, for faster performance, saving the maximum of three regions in one map file rather than
one region in each of three separate map files. To give you an idea of file sizes, a map file containing three regions
consisting of Boston/Providence, New York City/Philadelphia, and Baltimore/Washington D.C. is about 80 MB; a map file
of one region containing Los Angeles/Southern California and Las Vegas is also about 80 MB; and a map file of one
region containing all of Florida is under 70 MB. If you are uploading to an SD card of 256 MB or more, you can create
regions up to 240 MB. However, maps of this size may take up to 6 hours or more for compilation and upload to the SD
card.
Detailed
Region 1
(80 MB)
Map File
Detailed
Region 1
(40 MB)
Detailed
Region 2
(40 MB)
Map File
Detailed
Region 1
(20 MB)
Detailed
Region 2
(20 MB)
= 80 MB
= 80 MB
80 MB
Available
Detailed
Region 3
(20 MB)
= 80 MB
Detailed
Region 4
(20 MB)
Map File 1
This works the same for an SD Card. You can have data on the unit and on an SD Card at the same time, with the ability
to access both. As you can see, the combinations are almost limitless.
The Magellan RoadMate 300 cannot route between map files, only between detailed regions contained within the same
map file. Also, the Magellan RoadMate can have only one map file active at a time, so it is important to have a plan in
mind when creating your regions and map files.
Before we talk about creating regions, let’s see how the Magellan RoadMate handles routing.
Map File 2
18
Maps and Data
Basemap Routing vs. Detailed Map Routing
The Magellan RoadMate comes with a built-in basemap. The basemap
contains highways and city centers. The basemap does not contain street
address information, points of interest, or other map data (such as waterways,
railroads, or parks). The Magellan RoadMate can route via the basemap to a
city center or point selected on the screen using the available road data. Where
there is no data, a thin, straight line from point to point will be used with a flag
indicating the start and finish of normal street routing. You will be routed from
your current position via a straight line to the nearest major road or freeway onramp, along the freeway to the off-ramp closest to your destination, and then
via straight line to your destination.
With the detailed map, you are routed using turn-by-turn guidance on all city
streets and highways. Also, you have access to detailed map data and points of
interest. As you can see, with the detailed map the route becomes more direct
using the surface streets.
With this information in mind, let’s see how the Magellan RoadMate routes
between regions.
Destination
Destination Selected fr
detailed map database
Current Position
Current Position
19
Maps and Data
Routing Between Regions
Detailed regions can occupy any space on the map. They can be side by side (non-overlapping), or they can have space
between them. Regardless of how the maps are arranged or what size they are, the Magellan RoadMate treats the
detailed maps as an “overlay” on the basemap. Think of the basemap as a frame to a puzzle. The detailed map regions
represent the individual pieces to the overall puzzle and fill in information where the basemap is lacking.
JAMES AVE.
MARILYN LN.
210
210
210
210
JASON CT.
605
605
FOURTH ST.
THIRD ST.
10
605
10
BASEMAP
10
605
10
BASEMAP WITH DETAILED REGION
20
Maps and Data
Say that you want to drive from Los Angeles to San Francisco. First, you need to know how much space you have
available (which the Magellan RoadMate Manager software will show you). You can draw one region that has both Los
Angeles and San Francisco contained within it, but it may be too large to store in the unit or on an SD Card. Consider
creating two regions: one for Los Angeles and one for San Francisco. So, what you would end up with would be detailed
information for Los Angeles, detailed information for San Francisco, and the space in between is the basemap. Starting
in Los Angeles you would have all of the detailed information to get you on the freeway and start you toward San
Francisco. Once you leave your detailed region of Los Angeles, the basemap takes over and routes you all the way to
your San Francisco region, where the detailed region assumes routing. While in the basemap, you are routed on the
freeways and major highways.
101
5
580
101
SAN FRANCISCO
5
101
5
101
LOS ANGELES
BASEMAP
21
Basic Operation
Basic Operation
Turning the Magellan RoadMate On
Press the Power button. The Power button is located on the left side of the unit (See
“Magellan RoadMate 300” on page 4 for button locations).
If power is properly connected, a logo screen is displayed.
Next, you will need to select the language you wish to use for your Magellan
RoadMate. This screen appears only if you start the unit right out of the box. If you
have connected the Magellan RoadMate 300 to your PC and launched the Magellan
RoadMate Manager application, the unused language files have been removed from the
unit.
The Warning screen will appear. At the bottom of the screen, select your preferred
user. The Magellan RoadMate can be personalized for three different users.
Inputting Text Characters
Whenever you need to input names, street addresses,
etc., the Magellan RoadMate will display a key pad.
Touch the screen or use the navigation key to input text.
Alphabetic Characters
Numerical Character Menu
Cancel
Space Bar
Backspace
Additional Characters Menu
Accept Entry
22
Basic Operation
Additional Characters (More)
When you are entering information, you may need to add punctuation or other special
characters. When available, select More to bring up the additional characters.
Numerical Characters (123)
You may also need to add numbers to your text. When available, select 123 to bring up
the numeric keypad.
Using QuickSpell
®
What Is QuickSpell?
The Magellan RoadMate uses QuickSpell technology to provide you with the fastest method possible to enter characters.
QuickSpell eliminates the possibility of a misspelled word or looking for a city or street that is not loaded. As you begin
entering characters, the QuickSpell feature of the Magellan RoadMate dims out those characters that are not available,
thereby speeding up the process of entering data.
Example:
Suppose that you need to input the name of a city, in this case, San Francisco.
Select “S”.
Select “A”.
23
Basic Operation
Select “N”.
Select the space bar.
When you feel that enough characters have been entered so that the list of cities is
short enough to find “San Francisco”, select OK.
Scroll up or down the list and select “San Francisco, CA”.
If the list is still too long, press the Cancel button to return to the keyboard and
continue entering characters. The list of items found in the database is limited to 100
items. When over 100 items have been found, “Matches: > 100” will be displayed in
the bottom right corner of the display; you may need to press the Cancel button and
enter additional characters.
24
Loading...