Lynx L24DWR Installation Manual

1

INTRODUCTION

Congratulations on your purchase of a Lynx residential
refrigeration product. Lynx has taken its expertise and
experience into creating the highest quality and most
innovative residential products on the market. Lynx’s
product offering gives you the opportunity to enjoy the
functionality and user friendliness outdoors, or in just
about any room of your home. All Lynx products are
built with commercial-grade stainless steel – providing
you with the beauty and durability for a lifetime of use.

This Installation and Operation Manual will answer your
questions about the features, operation and mainte­nance of your Refrigerated Cabinet model. If you have
questions that are not addressed here, call Customer
Service at 888-289-5969.

IMPORTANT:

PLEASE READ all instructions completely before at­tempting to install or operate the unit. First, as you fol­low these Installation and Operation instructions, take
particular note of the DANGER!, CAUTION! and WARN-
ING! symbols when they appear. This information is im­portant for the safe and efficient installation, operation
and care of your Lynx unit.

DANGER:

Indicates a hazard that will result in serious injury or
death if precautions are not followed.

WARRANTY REGISTRATION CARD

The package containing this manual also includes your
warranty information. Warranty coverage begins on the
date your Lynx unit was originally purchased.

IMPORTANT NOTE: Take a moment to read through

the included warranty statement and complete Registration
as soon as possible to validate the registration date. An
alternative method of completing the Warranty Registration
can be accomplished online at www.Lynxgrills.com

If you do not return your Warranty Registration l, Lynx will
use the date of sale as the first date of warranty for your
new Refrigerated Cabinet. You can also provide proof of
purchase to Lynx customer service at 888-289-5969.
Please record the purchase date of your Lynx product and
your dealer’s name, address and telephone number.

MODELNUMBER:_______________________________

SERIAL NUMBER:______________________________

PURCHASE DATE:______________________________

DEALER NAME & ADDRESS:

WARNING:

Indicates a hazard may cause serious injury or death
if precautions are not followed.

CAUTION:

Indicates a hazard where minor injury or product
damage may occur if you do not follow instructions.

Once the unit is completely installed, we suggest you
keep this manual and purchasing documentation in a
safe place for future reference. Should problems occur:
refer to the troubleshooting section of this manual. The
information will help you quickly identify a problem and
get it remedied. In the event you require assistance,
please contact Lynx Customer Service.

PLEASE RECORD YOUR MODEL’S INFOR­MATION

Whenever you call to request information or service, you
will need to know your model number and serial number.
You can find this information on the serial and identifica­tion plate located on the inside ceiling of your unit and
on the warranty registration card.

____________________________________________

____________________________________________

____________________________________________

DEALER TELEPHONE:

_____________________________________________

P/N 33448 Rev. C 5/13

2

TABLE OF CONTENTS

INTRODUCTION…………………………………………………………………………………….……..

PLEASE RECORD YOUR MODEL’S INFORMATION…………………………………….…….……

WARRANTY REGISTRATION CARD…………………………………………………………………...

TABLE OF CONTENTS……………………………………………………………………………….…..

GENERAL PRECAUTIONS…………………………………………………………………...…….……

INSTALLATION INSTRUCTIONS……………………………………………………………………….

FIGURE 1 SPECIFICATION DRAWING………………………………………………..………………

PREPARING THE SPACE………………………………………………………………..……………...

PREPARING ELECTRICAL CONNECTIONS…………………………………………..……………..

UNPACKING AND MOVING……………………………………………………………..………………

ANTI-TIP-OVER INSTALLATION………………………………………………………………………..

INSTALLING………………………………………………………………………………..….…………..

TOE PLATE INSTALLATION……………………………………………………………….…..………..

2

2

2

3

4

4

5

6

6

6

7

8

9

FIGURE 3 TOE PLATE INSTALLATION……………………………………………..………………..

DRAWERS…………………………………………………………………….……..…..………………..

OPERATION………………………………………………………………………..…..…….…………..

INTERIOR LIGHT………………………………………………………………………...………………..

LOADING PRODUCT……………………………………………………………………………………..

TEMPERATURE CONTROLLER………………………………………………………………………..

TEMPERATURE CONTROLLER ADJUSTMENTS…………………………………..………………

CHART 1 PRODUCT TEMP SET POINTS AND RANGES……………………..…..………………

CHECKING PRODUCT TEMPERATURE……………………………………...……..………………..

MAINTENANCE……………………………………………………………………………..……………..

LIGHT BULB REPLACEMENT……………………………………………………………………………

CLEANING……………………………………………………………..…..……………………………….

CONDENSER CLEANING……………………………………………………………..…..……………..

9

10

11

11

11

11

12

14

13

15

15

15

15

TROUBLESHOOTING………………………………………………..……………….…………………..

WARRANTY……………………………………………………..…………………………. ……………..

16

19

3

GENERAL PRECAUTIONS

DANGER:

Risk of child entrapment, before you throw away your
old refrigerator, take off the doors and leave shelves
in place so that children may not easily
climb inside.

DANGER:

Altering, cutting of the power cord, or removal of the
power cord, removal of power plug, or direct wiring
can cause serious injury, fire and/or loss of property
and/or life and will void the warranty.

WARNING:

Never attempt to repair or perform maintenance on

the unit until the electricity has been disconnect­ed.

The anti-tip kit must be installed on this unit before it

is used. Never use the drawers, shelves or doors
as steps or to support more than they were de­signed to support.

CAUTION:

Do not lift unit by drawer or door handles.

Failure to clean the condenser every three months

can cause the unit to malfunction. This could
void the warranty.

CAUTION:

Use only genuine Lynx replacement parts. Imitation
parts can damage the unit, and may void the warranty.

INSTALLATION INSTRUCTIONS:

General:

All electrical instructions assume that outlet is located
4 to 10 inches from the floor

 Floor must be level in area of installation. Leg lev-

elers are used for fine-tune adjustment only and
should not be used to compensate for floor differences
exceeding ½-inch.

 When moving unit into position, take care to pro-

tect floor surface with cardboard, rugs, etc.

 Never attempt to move unit without the aid of at

least one other person.

Always secure door shut prior to moving the unit

Finished Opening Requirements:

 Height: 34-3/8” minimum

35-1/2” maximum

 Depth: 24”

Never install the unit behind closed doors. Be sure

front louvered toe plate is free of obstruction.
Obstructing free airflow can cause unit to mal­function, and may void the warranty.

 Width: 24”

4

Figure 1 Dimensions

5

PREPARING THE SPACE

Make sure that the opening where the unit is to be in­stalled is properly prepared. Refer to Figure 1 to en­sure the space dimensions and electrical service are
correct for the models to be installed.

CAUTION:

If unit is being installed under a counter top it is recom­mended that the counter top be supported by structure
other than the refrigerated cabinet to prevent damage
to the counter top.

IMPORTANT NOTE: Allow 24” clearance in front of
the unit for drawer pull-out.

IMPORTANT NOTE: Make sure the floor under the
unit is level with the surrounding finished floor. Protect
a finished floor with plywood, cardboard or some other
suitable material before moving the unit into place.
Failure to do this may result in damage to the floor.

PREPARING ELECTRICAL CONNECTIONS

A 115 volt, 60Hz, 15 amp circuit with GFI protection
and electrical supply are required. A separate circuit is
required for each Lynx unit installed.

Follow the National Electrical Code and local codes
and ordinances when installing the receptacle.

All Lynx units come equipped with a NEMA 5-15P 90°
plug with a minimum of 5-feet of cord extending be­yond the rear of the cabinet. The electrical outlet must
be flush with or recessed into the back wall.

IMPORTANT NOTE: Never use an extension cord to
extend the power cord to the electrical receptacle.

DANGER:
ELECTROCUTION HAZARD!!

Electrical grounding required. This appliance is
equipped with a three prong (grounding) polarized plug
for your protection against possible shock hazards.

 Never remove the round grounding prong from the

plug.

Where a two-prong wall receptacle is encountered or a
longer power cord is required, contact a qualified electri­cian to have it replaced in accordance with applicable
electrical codes.

DANGER:

Failure to comply with the above electrical guidelines
may result in possible injury/death/fire or loss of property.

UNPACKING AND MOVING

CAUTION:

Do not cut cardboard sleeve covering the unit. Cutting
may result in damage to the exterior of the cabinet.

 Uncrate the unit outside on a flat level surface. Re-

move the cardboard sleeve by removing the banding
holding the sleeve to the shipping base. Carefully lift
the cardboard sleeve up over the top of the unit.

 Carefully lift unit off base and onto a hand truck or

dolly (this should be done with a minimum of two
people; larger units may require additional helpers).
Make sure unit is balanced on transporting device.
Secure unit to transporting device using soft, flexible
strapping. Protect unit surfaces with cloth material
where strapping contacts unit.

 Before moving unit, secure door to unit with tape to

the door closed.

 Carefully move unit to installation site and place in

front of opening.

WARNING:

A minimum of two people should lift the unit of the base
to prevent possible personal injury.

 Never use a two-prong grounding adapter.

 Never use extension cord to connect power to the

unit.

6