Lynx L15WINE User Manual
Model L15WINE
P/N 35312 02/15
Page 2
Lynx Grills Inc.
L15WINE
APPLIANCE SAFETY
Your safety and the safety of others are very important to us.
We have provided many important safety messages in this manual and on your appliance. Always read and
obey all safety messages.
Serious injury can result if you do not follow these instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and
tell you what can happen if the instructions are not followed.
WARNING: Important safety instructions
Read this manual carefully and completely before using your refrigerator to reduce the risk of:
1. Fire
2. Electric shock
3. Personal injury or property damage
4. Unapproved installation or service
This product is designed for indoor or outdoor installation. Improper installation, adjustment, alteration, service or maintenance can cause personal or property damage. Read this manual thoroughly before installation, use or service.
IMPORTANT: When using electrical appliances, basic safety precautions should always be followed including
the following:
1. Read all instructions before using the refrigerator
2. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appli-
ance. To protect against electrical shock, do not immerse cord, plugs, or base in water or other liquids.
3. Plug into a grounded 3-prong receptacle.
4. Never use an extension cord
5. Never remove the grounding prong or use a 3/2 plug adapter
6. Avoid using an outlet controlled by a wall switch
7. Unplug the unit when not in use and before cleaning.
8. Do not operate any appliance with damaged cord or plug, or after the appliance malfunctions or has been
damaged in any manner. Contact Lynx Customer Care Department for service information or additional
details.
9. UL listed for indoor and outdoor use.
10. Make sure the appliance is turned off before plugging in or removing the plug from the power receptacle.
11. Do not repair or replace any part of this refrigerator. All servicing should be done by an authorized service
agency. Contact Lynx Customer Care Department for service information.
12. Save these instructions for future reference.
CAUTION: UNPLUG the refrigerator before beginning any work. Make sure you READ and UNDERSTAND these
instructions BEFORE installation. If you have any questions or concerns prior to, or during service, please call Customer
Care/Tech. Support at 888-289-5969, Mon.– Fri. 6AM to 4:30PM, and Saturdays from 8AM to 1PM Pacific Time.
Page 3
Lynx Grills Inc.
L15WINE
Proper Disposal of Your Old Appliance:
Old refrigerators can represent a suffocation hazard to children!
1. Remove the doors from your old refrigerator .
2. Leave shelves in place.
3. If an old refrigerator contains refrigerants, it must be recycled by a licensed service or disposal company.
INSTALLATION INSTRUCTIONS
UNPACKING
Excessive Weight Hazard! * Use two or more people to move and install your appliance.
Failure to do so can result in back or other injury.
ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS BEFORE TURNING ON, TO ALLOW THE
COMPRESSOR LUBRICANT TO DRAIN.
1. Remove Packaging Materials
2. Remove tape and glue residue from surfaces before turning on the appliance. Rub a small amount of liquid
dish soap over the adhesive with your fingers. Rinse with warm water and dry.
3. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or
glue. These products can damage the surface of your appliance.
4. When Moving Your Appliance:
Your appliance is heavy. When moving the appliance for cleaning or service, be sure to protect the floor.
Always pull the appliance straight out when moving it. Do not wiggle or “walk” the appliance when trying to
move it, because floor damage can occur.
5. Clean Before Using
After you remove all of the packaging materials, clean the inside of your appliance before using it. See the
cleaning instructions in “Appliance Care.”
6.If necessary level the refrigerator as needed for best operation.
Keep flammable materials and vapors, such as gasoline, away from appliances. Failure to do so can
result in death, explosion, or fire.
LOCATION REQUIREMENTS
IMPORTANT: Do not install the appliance near an oven, radiator, or other heat source, nor in a location
where the temperature will fall below 45°F (5°C). Do not place in direct sunlight.
Check the strength of the floor before installing your appliance. It should hold the weight of the fully loaded
appliance. Allow at least 1” (2.5 cm) of airspace at the top and on both sides of the appliance and 1” (2.5 cm)
between the back of the appliance and the wall. If the appliance is going to be placed against a wall, leave
extra space on the hinge side so the door can open wider than its width.
BE SURE THAT YOU DO NOT BLOCK THE AIRFLOW UNDER THE APPLIANCE .
Page 4
Lynx Grills Inc.
L15WINE
INSTALLATION INSTRUCTIONS
L15WINE DIMENSIONS, AND CUTOUT DIMENSIONS
Page 5
Lynx Grills Inc.
L15WINE
INSTALLATION INSTRUCTIONS
CHOOSING THE RIGHT PLACE
Place the appliance in a dry and regularly ventilated place. It is recommended that this appliance always be operated in an
ambient temperature of at least 60°F and under 85°F. The appliance may be exposed to lower or higher temperatures but
only for a short period of time and the temperature should never be lower than 45°F. Never place the appliance near heat
emitting devices (e.g. cooker, radiator, water heater or similar devices) and do not expose it to direct sunlight.
RECOMMENDED GROUNDING METHOD
A 115 Volt, 60 Hz. AC only 15- or 20- amp fused or circuit breaker protected, grounded electrical supply is required. It is
recommended that a separate circuit serving only your appliance be provided. Use outlets that cannot be turned off by a
switch or pull chain. Connect this appliance to a 3 prong power supply socket outlet (which has a ground terminal). If you only
have a two prong outlet have it replaced by a qualified technician with an outlet that meets the local codes. Required nominal
voltage and frequency are indicated on the rating plate. The connection to the power supply and grounding has to be made
according to current standards and regulations. The appliance resists temporary voltage tolerance from -15 to 10%.
IMPORTANT
Electrical Shock Hazard. Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use a 2/3 adapter. Do
not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
Installation requires an outdoor rated 120 VAC 15A GFI (Ground Fault Interrupter) electrical outlet adjacent to the refrigerator. The GFI outlet features an internal breaker that reduces shock hazard. This type of outlet should be installed
by a qualified electrician either inside the enclosure or near the location of the refrigerator installation.
Rating/Electrical Plate Location
The refrigerator rating plate is located on the inside, on the front right-hand side of the top panel. This plate has the
model and serial number, and the following electrical ratings:
115 Volts, 2.3 Full Load Amps, 60Hz, 1 Phase. The refrigerator is UL listed for outdoor use.
ENERGY SAVING TIPS
The more airflow you can provide around an appliance, the less energy it will use.
Keep doors or drawers open a minimum of time, and shut securely.
LEVELING YOUR REFRIGERATOR
1. Locate the two front leveling legs mounted into the underside of the appliance.
2. Adjust the front legs just enough to lift the cabinet up off of the floor.
3. Place a leveling tool on top of the appliance first side to side, then front to back. Turn leg counterclockwise to raise a corner. Turn
leg clockwise to lower a corner.
4. Once you have achieved side to side level, increase the front to rear adjustment to be slightly higher at the front. This will ensure
the door closes automatically once it is released. Increase the front to rear adjustment until the door self-closes.
5. After appliance is fully loaded, recheck with level as in Step 3.
Loading...