Lynx HR-SERIES User Manual

USER MANUAL

V.16.05

HR-Series

Lynx Pro Audio S.L.

Valencia, Spain - www.lynxproaudio.com - [e-mail]

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]

HR-series

Manufacturer

CE CERTIFICACTION, EUROPEAN PRODUCT

LYNX Pro Audio S.L.
Calle 7 - Pol. Ind. Picassent
E-46220 Picassent (Valencia)

This user manual is property of Lynx Pro Audio S.L. Any reproduction of this manual, by any means is strictly prohibited.
Copyright 2016. All rights reserved.

INTRODUCTION

To facilitate the correct and reliable use of the HR cabinets we have designed this instruction manual, please
read it before proceeding to install the cabinet.

Please observe the technical data carefully and do not ignore the instructions included within this manual.

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]

HR-series

CONTENTS

1. SAFETY PRECAUTIONS 4

2. CABINET CONNECTIONS 5
Normative 5
Connectors 5
Recommendations 6

3. CABINET INSTALLATION 7
Mounting advices 7
Coverage change with the rotatable horn 7
Mode passive or bi-amp 8
Installation accessories 8
Acoustical Prediction Software: Rainbow 9

4. MODEL PER MODEL TECHNICAL DATA 10

5. CERTIFICATIONS 15

6. GUARANTEE 16

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]

HR-series

- Heavy equipment.

Apply back protection when using heavy cabinets. Avoid loading and unloading at heights.

- Hearing damage risk.

These systems can reproduce large quantities of sound pressure which can damage hearing. Take
precautions if you are going to be near them for extended amounts of time and do not get too close.

- Hanging – Flying.

Do not hang the cabinets from the handles or any other part than the designated hanging point.

When fl ying the cabinets never exceed the maximum safe working loads or ignore the instructions

included within this manual. Rigging must be always carried out by professionals.

- Delicate Material.

Please ensure no foreign object or water enters the speaker. Only clean the unit with dry cloths. Do
not use solvents.

- Fire risk.

Do not put naked fl ame, such as lighted candles, close or on top of the unit.

- Electromagnetic and interferente emissions.

Avoid placing objects which through electromagnetic waves can damage the unit, such as mobile
phones, lap tops, magnetic strip cards etc.
This system complies with normatives EN 55103-1 (1)
EN 55103-2 (2)
(1) This device may not cause harmful interferences.
(2) This device may receive interference including interferences that may cause undesired working.

-IMPORTANT NOTE.

This Equipment must be used in accordance with these instructions and by trained professional
personnel only. This equipment should not be used in places with extreme tropical climates. Don’t
expose this apparatus to extreme humidity and or temperature values.

4

1. SAFETY PRECAUTIONS

Please read the following information carefully and follow these safety precautions.

LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com [e-mail]

HR-series

2. CABINET CONECTIONS

2.1 Normative

The HR cabinets meet the following standards:
EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and

entertainment lighting control apparatus for professional use (-1 Emmision).
EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and

entertainment lighting control apparatus for professional use. (-2 Immunity)
EN 60065:2002: Audio, video and similar electronic apparatus. Safety requirements.

2.2 Connectors

The HR cabinets have a connection panel at the rear of the cabinet. This consists of 2 internally bridged Neutrik
NL4-MP connectors which apply no process to the signal.

Note: If pins +-2 are not used they will still be internally bridged.

The following table indicates which pins are used for all the models,

with passive and bi-amplifi ed modes.

5