Pipette Shaker
Unpacking and Setup
Carefully unpack the pipette shaker, saving packing materials in the unlikely event you need to return the rocker.
Immediately call LW Scientific if you detect any damage. If you need to return the item, please use the original
packaging.
Setup
Place Pipette Shaker on a flat, stable surface. Ensure the controls are set in the “OFF” position. Plug into the
appropriate electrical outlet.
MKT-7.5.3-L-035 | Rev 0
P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30046
Controls
•Three position Power Switch: Used to turn the Pipette Shaker on and off. Postitions are ON, OFF, and TIMER.
ON setting runs continuously.
•Red Power light: Signals the unit is on.
Operation
1. Place samples on the top of the holder
2. Turn on the Power switch to ON or TIMER position
Specifications
Speed: 2500 RPM
Power: 110V / 60Hz (220V available)
Height: 158.75mm (6.25 in)
Width: 133.35mm (5.25 in)
Weight: 1.9Kg (4.2 lbs.)
Notes for Safe Use:
•Do not operate unit in or near water or other liquids.
•Unplug unit before cleaning or repairing.
•Do not use if electrical cord is damaged.
•Replace cord if damaged.
P. 770.270.1394 F. 770.270.2389 865 Marathon Parkway Lawrenceville GA 30046
Loading...