Lux Products PSP300 User Manual

Complete, Easy To Read

INSTALLATION AND

OPERATING INSTRUCTIONS

PSP300 SERIES

FEATURES

SMART TEMP®ELECTRONIC THERMOSTAT

LUX PRODUCTS CORPORATION

Mt. Laurel, New Jersey 08054, USA

43383-05

IMPORTANT!

Please read all instructions carefully before

beginning installation.

Save them for future reference.

W A R N I N G :

FOR USE ONLY WITH AIR CONDITIONERS AND

SPACE HEATERS THAT AUTOMATICALLY

RESTART COOLING OR HEATING OPERATION

AFTER POWER RECONNECTION

Thank you for your confidence in our product. To obtain the best results from your investment, please read these instructions and acquaint yourself with your purchase before installing your new thermostat. Then follow the installation procedures, one step at a time. This will save you time and minimize the chance of damaging the thermostat and the systems it controls. These instructions may contain information beyond that required for your particular installation. Please save for future reference.

COMPATIBILITY

Your PSP300 Programmable Outlet Thermostat is compatible with 120Volt, 15 Amp Plug, 60 Hz Window Air Conditioning Units and Portable Space Heaters only. It cannot be used with typical 24 V systems, hydronics systems, or heat pumps. Ask your dealer for other LUXPRO thermostats to control those systems.

1. ON/OFF SWITCH

2. SOFT TOUCH BUTTONS

3. LUX SPEED DIAL

●

Heating and Cooling

●

Electronic

●

Programmable

●

Plugs into normal 110 Volt 15

Amp Electrical Outlet

●

5/2 Day Programming (Weekdays and Weekends can be different)

●

Energy Star®Compliant

●

Default Energy Star Approved Program

●

Positive On/Off Switch

●

Easy to Install

●

4 Periods Per Day

●

120VAC Powered with Batteries

●

2 G13A size 1.5V Alkaline Button Cell Batteries Included (For Clock Only)

●

Temporary and Constant Temperature Override

ELECTRICAL RATINGS

●

120V/60 Hz

●

Maximum load is 15 Amps at 120 Volts

●

Power Consumption 2 W (maximum)

●

Plug and Receptacle NEMA 5-15R (normal household 15 Amp receptacle)

4. HEAT/COOL SWITCH

5. EXTERNAL TEMPERATURE SENSOR

●

Separate Programs for

Heating and Cooling

●

Armchair Programming

●

Easy Programming with LUX

Speed Dial

●

Battery Free Nonvolatile Memory For All Programs And Settings

●

ETL Approved

●

User Calibration

●

On Screen Low Battery Indicator

●

F/C Temperature Display

●

Soft Touch Buttons

●

2 Minute Short Cycle Protection

●

Adjustable Temperature differential/Cycle Rate (#1 thru #9)

●

1 Year Warranty

(Patent # 5,673,850)

WARNINGS:

BACK OF UNIT

SCREWDRIVER

EXTERNAL TEMPERATURE SENSOR

BATTERY PANEL

RIBBON

●

Read all instructions before using this ther-

INSTALLATION

mostat.

●

To reduce the risk of electric shock, this product has a grounding type plug that has a third (grounding) pin. This pin will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

●

Do not use Outdoors.

●

Do not use in a bathroom. Never locate where it may fall into a bathtub or other water container.

●

Do not insert or allow foreign objects to enter any openings as this may cause electric shock, fire, or damage to the thermostat.

●

Do not use in areas where gasoline, paint, flammable liquids are used or stored.

●

Space Heaters can be dangerous if used

TOOLS REQUIRED: LOCATION:

●

Do not locate where air circulation is poor, such as in a corner or an alcove; or behind an open door.

●

Do not install it where there are unusual heating conditions, such as: in direct sunlight; near a lamp, television, radiator, register, or fireplace; near hot water pipes in a wall; near a stove on the other side of the wall.

●

Do not locate in unusual cooling conditions, such as: on a wall separating an unheated room; or in a draft from a stairwell, door, or window .

●

Do not locate in a damp area. This can lead to corrosion that will shorten thermostat life.

●

Do not install the unit until all construction work and painting has been completed.

improperly. Be sure to follow all the Warnings and Cautions that came with the instruction manual written by the manufacturer of the Space Heater.

●

Avoid the use of an extension cord because the extension cord may overheat and cause risk of fire. However, if you have to use an extension cord, the cord should be a 3-wire, grounding type, with No. 14 AWG minimum size and rated not less than 1875 Watts.

●

Use this thermostat only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

●

Never clean this thermostat while it is

PREPARING THE UNIT

1. The PSP300 comes with (2) G13A size 1.5V Alkaline Button Cell Batteries already installed. These batteries power the clock only during normal operation. They also provide backup power to retain the thermostats programs and settings while it is not plugged into the wall. In order to "activate" them, you must remove the black ribbon from between the two batteries prior to using it. Use a small regular screwdriver to pry open the battery holder and pull out the black ribbon.

plugged in. Turn On/Off switch to Off, pull out of the wall, and then clean by using a rag only.

Small regular screwdriver

CAUTIONS:

●

Your thermostat is protected against normal static electric discharges. To minimize the risk of damaging the unit in extremely dry weather, touch a grounded metal object before touching your thermostat.

●

Be careful not to drop the unit or disturb electronic parts.

+ 4 hidden pages