A. FCC Requirements for USA Page 5
B. IC Requirements for CANADA Page 7
C. Temperature Page 7
D. Electrical Power Supply Page 8
E. Battery Page 8
F. Lets protect our environment Page 8
II. HAND HELD READER Quick Start Page 9
III. HAND HELD Bluetooth Reader/Writer Page 10
1. Bluetooth Key Setup Page 10
A. Operating System Windows XP Service Pack 2 Page 10
B. Other Operating System Page 10
2. HAND HELD Reader / Writer Setup Page 11
IV. Nonatec PRO Software Page 13
1. Nonatec Pro Software Setup Page 13
A. CD Installation Page 13
B. First use of the Nonatec Pro Software Page 13
2 Version 2.0 November 2008
TABLE OF CONTENTS
2. How to Use the Nonatec PRO software? Page 15
A. General Presentation Page 15
a. The “General” Menu Page 15
b. The “Initialization” Menu Page 16
c. The “Work in Progress” Menu Page 17
d. The “History” Menu Page 18
e. The “ Universal Reading” Menu Page 20
f. The “Maintenance” Menu Page 21
g. The “?” Menu Page 21
B. More Explanations Page 22
a. To read a tag Page 22
b. To Modify a tag Page 23
c. To write a tag Page 23
d. To print a document Page 24
e. The database Page 24
IV. FAQ and SUPPORT Page 25
1. FAQ Page 25
2. Contact Page 26
3 Version 2.0 November 2008
I. HAND HELD READER
1. General description
Plug for reloading
LCD Display
Power Up Button
Antenna for reading / Writing the Nonatec transponder
4 Version 2.0 November 2008
Before the first use, completely reload the battery.
First connect the plug to the reader, then connect
I. HAND HELD READER
NEVER use the reader when the
battery is being reloaded
Beforethefirstuse,completely
the charger to the electrical power.
reloadthebattery.
2. Security
To comply with FCC and Industry Canada RF radiation exposure limits
for general population/uncontrolled exposure, this device must not be
co-located or operating in conjunction with any other antenna or transmitter.
A. FCC Requirements for USA
Hand Held Reader
WARNING TO USERS IN THE UNITED STATES
Federal Communication Commission Interference Statement
47 CFR Section 15.105 (b)
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
5 Version 2.0 November 2008
I. HAND HELD READER
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
-
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NO UNAUTHORIZED MODIFICATIONS
47 CFR Section 15.21
Caution: This equipment may not be modified, altered, or changed in
any way without signed written permission from LUTRONIC INTERNATIONAL. Unauthorized modification may void the equipment authorization from the FCC and will void the LUTRONIC INTERNATIONAL.
This device ARM READER complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
6 Version 2.0 November 2008
I. HAND HELD READER
B. IC Requirements for CANADA
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
L'utilisation de ce dispositif est autorisée seulement aux deux conditions
suivantes : (1) il ne doit pas produire de brouillage, et (2) l'utilisateur du
dispositif doit être prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
Afin de réduire le risque d'interférence aux autres utilisateurs, il faut
choisir le type d'antenne et son gain de façon à ce que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne soit pas supérieure au niveau
requis pour l'obtention d'une communication satisfaisante. Cet appareilnumérique de la classe B respecte toutes les exigences du règlement
sur le matériel brouilleur du Canada.
C. Temperature
The maximumtemperature for using this product is 40°C. (104°F)
7 Version 2.0 November 2008
I. HAND HELD READER
D. Electrical Power Supply
The Power Supply should always be plugged in a source having the
electrical features required. NEVER modify the line cord or the adaptor.
Always use the power supply included with the Nonatec Reader. Other
power supplies might not have the same characteristics; they might not
be respecting the same security and performance standards.
E. Battery
The battery could explode if it is replaced by an incorrect type of battery.
Please completely reload the battery before using the reader.
F. Lets protect our environment
This reader is composed of many components that can be easily recycled.
Make sure it is given to an authorized company for recycling.
Users are invited to read the generals sales conditions.
Recycling the Battery
The battery should be recycled by following the legislation.
It is not recommended to use the reader while being
reloaded.
8 Version 2.0 November 2008
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.