Luminex PC I User Manual
PC Installation Instructions
1
Sleeve
PC
Parts Inventory
Stand
Cover
Power Cord
VGA Cable
Mouse
Monitor
Keyboard
Not Used
2
Plug the blue VGA connector into
the back of the monitor.
Back of Monitor
VGA Connector connected
to the back of monitor.
3
Attach the monitor to the stand by lining up the top tabs with the tab
slots on the back of the monitor. Lower the monitor onto the tabs and
tilt the monitor until it locks into place.
Bracket Tabs
Front of Stand
Back of Monitor
Tab Slots
4
Power cord connected
to the monitor.
Connect the power cord to the monitor.
PC
5
Insert the PC into the sleeve.
Sleeve
Slide lock to the left
to unlock the sleeve.
Sleeve
Slide the lock to the
right to lock the PC in
the sleeve.
6
Slide the PC in the sleeve onto the
back of the stand.
Slide the sleeve onto the back of the stand.
Back
of the
Stand.
Note: For additional installation information, refer to the PC set up instructions that you received with your PC.
PC Installation Instructions continued
7
Not Used
Power
VGA Cable
connect to PC
8
VGA Cable
Connect to PC
Power
Connect monitor and power to PC
9
Keyboard
Mouse
MAGPIX
Connect:
10
Cover
11
Connect power to the stand
Power Cord
© Luminex Corporation, 2010
PN 89-30000-00-263 Rev. A
Loading...