Lumens Technology PC190 User Manual

User Manual

To download the latest version of Quick Start
Guide, multilingual user manual, software, or

driver, etc., please visit Lumens

http://www.lumens.com.tw/goto.htm

PC190

Document Camera

[Important]

English - 0

Table of contents

Copyright Information ....................................................................................... 3

Chapter 1 Safety Instructions .......................................................................... 4

Precautions .................................................................................................. 5

FCC Warning ................................................................................................ 5

EN55022 (CE Radiation) Warning ............................................................... 5

Chapter 2 Package Contents ............................................................................ 6

Chapter 3 Product Overview ............................................................................ 7

3.1 Relative position of the presenter and document ............................... 8

3.2 Recommended distance ..................................................................... 8

Chapter 4 Installation and Connections.......................................................... 9

4.1 System diagram .................................................................................. 9

4.2 Installation and setup ........................................................................ 10

4.3 Connecting to a projector or monitor ................................................ 10

4.4 Connecting to a computer and use Podium View™ software .......... 10

4.5 Connecting to a computer and projector or monitor simultaneously 11

4.6 Connecting to a computer and reading the USB Disk simultaneously11

4.7 Connecting to an Interactive Whiteboard (IWB) ............................... 12

4.8 Connecting to a TV ........................................................................... 12

4.9 Connecting to a speaker .................................................................. 13

4.10 Connecting to a Computer with RS232 ............................................ 13

4.11 Installing application software........................................................... 14

Chapter 5 Start Using ...................................................................................... 15

Chapter 6 Control Panel/Remote Control and Setting Menu ...................... 16

6.1 Functions of control panel and remote control ................................. 16

6.2 Setting Menu .................................................................................... 18

Chapter 7 Descriptions of major functions .................................................. 23

7.1 I would like to automatically adjust the image to have the best

brightness and focusing performance .............................................. 23

English - 4

7.2 I would like to switch image sources ................................................ 23

7.3 I would like to make text clearer and photos more colorful .............. 23

7.4 I would like to zoom in/out images ................................................... 24

7.5 I would like to use the auto focus ..................................................... 24

7.6 I would like to adjust the focal length................................................ 24

7.7 I would like to adjust the brightness ................................................. 24

7.8 I would like to turn on/off the lamp .................................................... 25

7.9 I would like to freeze images ............................................................ 25

7.10 I would like to capture images .......................................................... 25

7.11 I would like to record videos ............................................................. 26

7.12 I would like to view captured/recorded images ................................ 27

7.13 I would like to delete the captured/recorded images ........................ 27

7.14 I would like to automatically delete the stored images whenever it is

turned off (Auto Erase) ..................................................................... 27

7.15 I would like to enlarge a part of the image (PAN) ............................. 28

7.16 I would like to use the MASK and Spotlight function ........................ 28

7.17 I would like to play the slides (Slide Show) ...................................... 29

7.18 I would like to compare images (compare live images with stored

images (PIP)) .................................................................................... 30

7.19 I would like to reduce the image noise (Projector Type) .................. 30

7.20 I would like to resume the factory default settings (Factory Reset) . 31

7.21 I would like to use a USB disk .......................................................... 31

7.22 Computer-related functions .............................................................. 31

Chapter 8 Connecting to Microscope ........................................................... 37

Chapter 9 DIP Switch ...................................................................................... 38

9.1 Connecting to a projector or monitor ................................................ 38

9.2 Connecting to a TV ........................................................................... 39

Chapter 10 Troubleshooting........................................................................... 40

English - 5

Copyright Information

Copyrights © Lumens Digital Optics Inc. All rights reserved.

Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.

Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.

In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.

To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies, nevertheless without any intention
of infringement.

Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.

English - 3

Chapter 1 Safety Instructions

Always follow these safety instructions when setting up and using the Document
Camera:

1. Do not place Document Camera in tilted position.

2. Do not place the Document Camera on an unstable trolley, stand or table.

3. Do not use the Document Camera near water or source of heat.

4. Use attachments only as recommended.

5. Use the type of power source indicated on the Document Camera. If you are
not sure of the type of power available, consult your dealer or local electricity
company for advice.

6. Place the Document Camera on a place that it can be unplugged easily.

7. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire.

 Ensure the plug is free of dust before inserting it into a socket.
 Ensure that the plug is inserted into the socket securely.

8. Do not overload wall sockets, extensions leads or multi-way plug boards as
this may cause fire or electric shock.

9. Do not place the Document Camera where the cord can be stepped on as
this may result in fraying or damage to the lead or the plug.

10. Unplug the Document Camera from the wall socket before cleaning. Use a
damp cloth for cleaning. Do not use liquid or aerosol cleaners.

11. Do not block the slots and openings in the Document Camera case. They
provide ventilation and prevent the Document Camera from overheating. Do
not place the Document Camera on a sofa, rug or other soft surface or in a
built-in installation unless proper ventilation is provided.

12. Never push objects of any kind through cabinet slots. Never allow liquid of
any kind to spill into the Document Camera.

13. Except as specifically instructed in this User Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.

14. Unplug the Document Camera during thunderstorms or if it is not going to be
used for an extended period. Do not place the Document Camera or remote
control on top of heat-emitting equipment or heated objects such as a car, etc.

15. Unplug the Document Camera from the wall outlet and refer serving to
licensed service personnel when the following situations happen:

 If the power cable or plug becomes damaged or frayed.
 If liquid is spilled into it or the Document Camera has been exposed to

rain or water.

<Note> Using an incorrect battery type in the remote control may result in

breakdown. Follow your country’s instructions on how to dispose of used

batteries.

English - 4

 Precautions

Caution: To reduce the risk of electric shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.

This symbol indicates
that this equipment may
contain dangerous
voltage which could
cause electric shock.

This symbol indicates that
there are important
operating and
maintenance instructions

in this User’s Manual with

this unit.

Note

Risk of Electric Shock

Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.

This Document Camera has a 3-wire AC line Plug. This is a safety feature to
ensure that the plug will fit into the power outlet. Do not try to disable this safety
feature.

If the Document Camera will not be used for an extended time, unplug it from the
power socket.

 FCC Warning

This Document Camera has been tested and found to comply with the limits for a
Class A or B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.

 EN55022 (CE Radiation) Warning

This product is intended for use in a commercial, industrial, or educational
environment. It is not intended for residential use.

This is a Class A product. In a domestic environment it may cause radio
interference, in which case the user may be required to take adequate measures.
The typical use is in a conference room, meeting room or auditorium.

English - 5

Chapter 2 Package Contents

PC190

Quick Start Guide

4-Step Card

(For download of other

language versions, please

visit Lumens website)

Download and Safety

Instruction

VGA Cable

USB Cable



Audio Cable

Power Cord

Remote Control

Appearance may vary

depending on

country/region

Remote Control Holder

Microscope Adapter

Accessory Pouch



Pouch

English - 6

Chapter 3 Product Overview

(Bottom)

9. LED lamp

8. Lens

10. DIP Switch

3. Lamp

7. Remote sensor

1. Gooseneck

2. AF button

6. Built-in
Microphone

4. Control panel

5. LED indicator

English - 7

3.1 Relative position of the presenter and document

3.2 Recommended distance

English - 8

Chapter 4 Installation and Connections

Computer

Projector or monitor

TV

Earphone or

speaker

Computer

USB Disk

4.1 System diagram

English - 9

4.2 Installation and setup

Monitor or

Projector

VGA Cable

Power Cord

AC Outlet

Computer

Projector

USB Cable

Power Cord

AC Outlet

VGA Cable

1. Please set up the DIP Switch Settings first. Refer to Chapter 9 DIP

Switch Settings in the PC190 User Manual.

4.3 Connecting to a projector or monitor

4.4 Connecting to a computer and use Podium View™
software

 Software can be downloaded from Lumens website.

English - 10

4.5 Connecting to a computer and projector or monitor

VGA Cable

Computer

Monitor or

Projector

VGA Cable

Power Cord

AC Outlet

Computer

USB Cable

USB Disk

Power Cord

AC Outlet

simultaneously

 Press [SOURCE] button to switch the image source.

4.6 Connecting to a computer and reading the USB Disk
simultaneously

English - 11

4.7 Connecting to an Interactive Whiteboard (IWB)

DIP Switch

Power Cord

AC Outlet

C-Video Cable

Computer

Projector

USB Cable

Power Cord

AC Outlet

VGA Cable

USB Cable

 It can be interoperated with major IWB models. The user manual can be

downloaded from Lumens website.

4.8 Connecting to a TV

 NTSC: USA, Canada, Mexico, Panama, Chile, Japan, Taiwan, Korea, and

Philippines

 PAL: Countries/regions not listed above.

<Note> You should unplug and reconnect the power cord, and then
restart the machine for DIP Switch Settings to take effect. Once
C-VIDEO is on, VGA OUT is not supported.
<Note> Only the live image can be displayed in C-Video Out mode.

English - 12

4.9 Connecting to a speaker

Power Cord

AC Outlet

Computer

Power Cord

AC Outlet

Earphone or

speaker

RS232 Adapter

4.10 Connecting to a Computer with RS232

 After connecting to the RS232 cable, you can use RS232 commands to

control PC190.

English - 13

4.11 Installing application software

The application software installed on the computer enables you to:

 Control the PC190.
 Capture and record images.
 Annotate the image, highlight important details and save it.
 Support the full screen function.

<Note> Please refer to Podium View™ software user manual for
installation steps and software operation.

English - 14

Chapter 5 Start Using

1. Place an object to be displayed
under the camera.

2. Turn on Power .

3. Adjust the gooseneck and lens to
the appropriate positions.

4. Press [AUTO TUNE] button
to optimize the image. You are
ready to teach/present.

 Each time the lens is moved,

locate the camera head and press
[FOCUS] to refocus the lens

 When using the remote control, aim at the remote sensor on the

PC190, and press the power button.

 Once PC190 is turned on, the LED on the control panel will flash a

few times and stay lit. Please contact your distributor if the LED is not

on.

English - 15

Chapter 6 Control Panel/Remote Control and

Name

Function Descriptions

Operation

Turn on and off the Document Camera.

Remote
control/Control
panel

,,,

Move up, down, left or right to select the
needed function.

Remote
control/Control
panel

FOCUS

AF Button.

Either sides of
the lens

AUTO TUNE

Automatically adjust the image to have the
best brightness and focusing performance.

Remote Control

BRT+/-

/

Manually adjust the brightness of the
image.

Remote Control

CAPTURE

/

Capture images to the USB disk (priority)
or internal memory.

Remote
control/Control
panel

DELETE

Delete images from the USB disk (priority)
or internal memory.

Remote Control

ENTER

/

Enter/Activate functions.

Remote
control/Control
panel

FREEZE

Freeze the current image to temporarily
stay on the screen. Press again to
defreeze.

Remote Control

MASK

Enter Mask/Spotlight mode.

Remote Control

MENU

Activate the setting menu/exits the menu.

Remote
control/Control
panel

PAN

Enable/Disable the Partial Enlarged mode.

Remote Control

Setting Menu

6.1 Functions of control panel and remote control

<Remark> The below functions are listed alphabetically

English - 16

PIP

Image comparison (compares live images
with captured image files).

Remote Control

PLAYBACK

/

Read files stored in the USB disk (priority)
or internal memory.

Remote
control/Control
panel

RECORD

Record motion images. Press [Record] to
record images to USB disk (priority) or
internal memory, and then press [Record]
again to stop recording.

Remote Control

SLIDE SHOW

Show the photos or videos stored in the
USB disk (priority) or internal memory in
Slide mode.

Remote Control

SOURCE

/

Switch between different sources of
signals:

1. Live images (default).

2. Computer.

<Remark> This button is disabled in
C-VIDEO Out mode.

Remote
control/Control
panel

ZOOM +/-

/

Increase or decrease the image size.

Remote
control/Control
panel

English - 17

6.2 Setting Menu

1st Level

Major Items

2nd Level Minor

Items

3rd Level Adjustment

Values

Function Descriptions

Display

Auto Tune

Activate

Automatically adjust the image to
have the best brightness and focusing
performance.

Lamp

1. Off

2. Arm lamp

3. Both Lamps

4. Head lamp

Use the left and right arrow keys to
switch the lamp.

<Remark> When it is set to Both
Lamps, both Arm lamp and Head
lamp are turned on.

Rotate

0° / 90° / 180° / 270°

Use the left and right arrow keys to
select the rotation angle.

Focus

0~A~Max

Use the left and right arrow keys to
adjust focal length on an object.

Brightness

0~A~Max

Use the left and right arrow keys to
adjust the brightness.

Mode

Normal/Slide/Film/Microsco

pe

Use the left and right arrow keys to
select the image mode.

Photo/Text

Photo/Text/Gray

Use the left and right arrow keys to
select the photo/text/gray mode.

Night Vision

On/Off

Use the left and right arrow keys to
select. The night vision mode suits
with darker environment.

Digital Zoom

On/Off

Use the left and right arrow keys to
turn on/off digital zoom.

Master:DHM025 Slave:DHO010

6.2.1 Version query:

1. Press [Menu] on the remote control or control panel to enter the setting
menu.

2. Press [] or [] to enter the [Advanced] menu.

6.2.2 Setting menu

<Remark> Press [Menu] on the remote control or control panel to enter the
setting menu; The bold underlined values in the following table are defaults.

English - 18

Storage

Slide Show

Activate

Show the photos or videos stored in
the USB disk (priority) or internal
memory in Slide mode.

Delay

1. 0.5 Sec

2. 1 Sec

3. 3 Sec

4. 5 Sec

5. 10 Sec

6. Manual

Use the left and right arrow keys to
select the delay time.
Select manual mode to switch images
manually.

Image Quality

1. High

2. Medium

3. Low

Use the left and right arrow keys to
select the image quality for the
captured images and recorded
videos.

Copy To USB
Disk

Yes/No

Use the left and right arrow keys to
select, and then press [ENTER] to
confirm to copy files from internal
memory to USB disk.

Delete All

Yes/No

Use the left and right arrow keys to
select, press [ENTER] to confirm the
deletion of all images from the USB
disk (priority) or internal memory.

Format

Yes/No

Use the left and right arrow keys to
select, and then press [ENTER] to
format the USB disk (priority) or
internal memory.

Setting

Capture

1. Single

2. Continuous shooting

3. Disable

Use the left and right arrow keys to
select the capture mode.
(Single/Continuous/Disable)

Capture Time

1. 1 hr

2. 2 hr

3. 4 hr

4. 8 hr

5. 24 hr

6. 48 hr

7. 72 hr

Use the left and right arrow keys to
select the capture time.

<Note> It only works when the
capture mode is set to [continuous]

Capture Interval

1. 5 Sec

2. 10 Sec

3. 30 Sec

4. 1 Min.

5. 2 Min.

6. 5 Min.

Use the left and right arrow keys to
select the capture interval.

<Note> It only works when the
capture mode is set to [continuous]

Auto Exposure

On/Off

Regardless of outside environment,
the machine will adjust the brightness
to the optimal condition. Use the left
and right arrow keys to select.

Auto White
Balance

Activate

Regardless of outside light or color,
the machine will adjust the color to the
optimal condition; Press [ENTER] to
activate.

Volume

0~A~Max

Use the left and right arrow keys to
adjust the volume.

English - 19

Projector Type

DLP/LCD

Use the left and right arrow keys to
select the projector type and reduce
image noise.

Advanced

Language

1. English

2. 繁體中文

3. Deutsch

4. Français

5. Español

6. Русский

7. Nederlands

8. Suomi

9. Polski

10. Italiano

11. Português

12. Svenska

13. ČESKY

14. 简体中文

English
Traditional Chinese
German
French
Spanish
Russian
Dutch
Finnish
Polish
Italian
Portuguese
Swedish
Czech
Simplified Chinese
Use the left and right arrow keys
in the Language option to select
the preferred language.

Lock Down

On/Off

Use the left and right arrow keys to
turn on/off the lock down function.
You can set the password when [On]
is selected.

Auto Erase

On/Off

Use the left and right arrow keys to
enable/disable Auto Erase.
When [On] is selected, the stored
images will automatically be deleted
when the system is turned off.

Preset Load

Yes/No

Read the value of the current image
mode. Use the left and right arrow
keys to select, and then confirm by
pressing [ENTER].

Preset Save

Yes/No

Read the value of the current image
mode. Use the left and right arrow keys
to select, and then confirm by pressing
[ENTER].

Factory Reset

Yes/No

Use the left and right arrow keys to
select, and then confirm by pressing
[ENTER] to restore the factory defaults.

English - 20

6.2.3 MASK Mode Setting Menu

2nd Level

Major Items

3rd Level Minor

Items

4th Level Adjustment

Values

Function Descriptions

MASK Mode

Transparency

0~4~6

Adjust the transparency of the mask
using left and right arrow keys.

Step

Large/Medium/Small

Select the step distance of the mask
using left and right arrow keys.

V Size

0~A~Max

Adjust the vertical height of the mask
using left and right arrow keys.

H Size

0~A~Max

Adjust the horizontal length of the
mask using left and right arrow keys.

Spotlight

Activate

Press [ENTER] to enter the Spotlight
mode.

2nd Level

Major Items

3rd Level Minor

Items

4th Level Adjustment

Values

Function Descriptions

Spotlight
Mode

Transparency

0~4~6

Adjust the transparency of the
border in the Spotlight mode using
left and right arrow keys.

Step

Large/Medium/Small

Select the step distance of the
spotlight zone using left and right
arrow keys.

V Size

0~A~Max

Adjust the height of the spotlight
zone using left and right arrow keys.

H Size

0~A~Max

Adjust the width of the spotlight zone
using left and right arrow keys.

Live

Activate

Press [ENTER] to return to live image.

6.2.4 Spotlight Mode Setting Menu

English - 21

6.2.5 Annotation Tools (Annotation)

Icon

Description

/

Expand/Collapse the Annotation menu

Open/Close the Free-hand Drawing
Tool menu

Select the line width

Select pen color

Clear all

Free-hand drawing tool

Draw a line

Draw a rectangle

Draw a polygon

Draw an ellipse

Eraser
(Clear marks of free-hand drawing
tool)

After the mouse is connected, right click the mouse to open the tools.
< Note> When the setting menu is activated, the tools cannot be used.

 Icon of

Annotation

 Main Menu

 Free-hand

Drawing Tool
menu

English - 22

Chapter 7 Descriptions of major functions

7.1 I would like to automatically adjust the image to have

the best brightness and focusing performance

Remote control:

1. Press [AUTO TUNE] for the optimal brightness and focal length.

Control panel:

1. Press [MENU] to enter the setting menu.

2. Press [] or [] to select [Display].

3. Press [] to select [Auto Adjust].

4. Press [ENTER].

7.2 I would like to switch image sources

The default of image source is Live Image. Press [SOURCE] on the
remote control or [ENTER] on the control panel for PC190 to

switch among the following modes in turn:

1. Live images (default).

2. Computer.

7.3 I would like to make text clearer and photos more

colorful

7.3.1 Photo/Text mode descriptions

The default [Photo/Text] mode is in Photo (Photo mode). To change this
setting, please use the remote control or the control panel to enter the
Options of the Setting Menu.
 [Photo] (default): for viewing photos or text with photos, making photos

more colorful.

 [Text]: for viewing text files, making the text clearer.
 [Gray]: for viewing black & white photos which will make the grayscale

differentiation distinct.

7.3.2 Setting Photo/Text mode

To change the settings, please use the remote control or the control
panel:

1. Press [MENU] to enter the setting menu.

2. Press [] or [] to select [Display].
English - 23

3. Press [] to select [Photo/Text]. (Please refer to 7.3.1 Photo/Text

mode descriptions to make the best choice.)

4. Press [] or [] to select the [Photo/Text/Gray].

5. Press [MENU] to exit.

7.4 I would like to zoom in/out images

1. Press [ZOOM+] on the remote control or control panel to zoom in

images.

2. Press [ZOOM-] on the remote control or control panel to zoom out

images.

7.5 I would like to use the auto focus

1. Press the [FOCUS] AF button on the right side of the lens.

7.6 I would like to adjust the focal length

Use the remote control or control panel:

1. Press [MENU] to enter the setting menu.

2. Press [] or [] to select [Display].

3. Press [] to select [Focus].

4. Press [] or [] to adjust.

5. Press [MENU] to exit.

7.7 I would like to adjust the brightness

Remote control:

1. Press [BRT +] to make it brighter.

2. Press [BRT -] to make it darker.

Control panel:

1. Press [MENU] to enter the setting menu.

2. Press [] or [] to select [Display].

3. Press [] to the [Brightness].

4. Press [] or [] to adjust the brightness.

5. Press [MENU] to exit.

English - 24

7.8 I would like to turn on/off the lamp

The default of the lamp is OFF. When using the remote control or control
panel:

1. Press [MENU] to enter the setting menu.

2. Press [] or [] to select [Display].

3. Press [] to the [Lamp].

4. Press [] or [] to select [Off/Arm lamp/Both Lamps/Head lamp].

5. Press [MENU] to exit.

7.9 I would like to freeze images

1. Press [FREEZE] on the remote control to freeze the current image on

the screen. Press again to defreeze.

7.10 I would like to capture images

7.10.1 Capturing and saving images

1. Press [CAPTURE] on the remote control or control panel to
capture and save images.

 You cannot capture images when the capture mode is set to

[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [Capture] to start capturing continuously,
or press [Capture] again to exit.

 To change the quality of captured images, please refer to 7.10.2

Setting the quality of captured images.

 To change the settings of captured images, please refer to 7.10.3

Setting continuous capture.

7.10.2 Setting the quality of captured images

1. Press [Menu] on the remote control or control panel to enter the
setting menu.

2. Press [] or [] to the [Storage] menu.

3. Press [] to find [Image Quality].

4. Press [] or [] to select among [High/Medium/Low].

5. Press [Menu] to exit.

English - 25

7.10.3 Setting continuous capture

1. Press [MENU] on the remote control or control panel to enter
the setting menu.

2. Press [] or [] to the [Setting] menu.

3. Press [] to find [Capture].

4. Press [] or [] to select [continuous].

5. Press [] to find [Capture Time]; Press [] or [] to set capture
time.

6. Press [] to find [Capture Interval]; Press [] or [] to set interval
time.

7. Press [MENU] to exit.

7.11 I would like to record videos

7.11.1 Recording motion images

<Remark> You may not be able to capture or record images
when [Capture] mode is set to [Disable].

1. Press [RECORD] on the remote control to start recording videos.

2. Record sounds with the built-in microphone of the control panel.

3. Press [RECORD] again to stop recording.

7.11.2 Setting the quality of captured images

1. Press [Menu] on the remote control or control panel to enter the
setting menu.

2. Press [] or [] to the [Storage] menu.

3. Press [] to find [Image Quality].

4. Press [] or [] to select among [High/Medium/Low].

5. Press [Menu] to exit.

7.11.3 Playing videos

 For playing videos, please refer to 7.12 I would like to view

captured/recorded images.

English - 26

7.12 I would like to view captured/recorded images

1. Press [PLAYBACK] on the remote control or control panel to display
thumbnails of all stored files.

2. Press [] or [] or [] or [] to select the thumbnail you want to play.

3. Press [ENTER] for full-screen play.

4. Press [] or [] to select different video and audio files.

5. Press [] or [] to adjust the volume of the video.

6. Press [MENU] to exit.

<Note> An external speaker must be connected to AUDIO OUT to play
sound.

7.13 I would like to delete the captured/recorded images

Remote control:

1. Press [PLAYBACK] to show the thumbnails of all stored files.

2. Press [] or [] or [] or [] to select the file you want to delete.

3. Pressing [DELETE] will open a [Delete File] window.

4. Press [] or [] to select [Yes].

5. Press [ENTER] to delete the selected file.

6. Press [MENU] to exit.

7.14 I would like to automatically delete the stored images
whenever it is turned off (Auto Erase)

Use the remote control or control panel:

1. Press [MENU] to enter the setting menu.

2. Press [] or [] to the [Advance] menu.

3. Press [] or [] to [Auto Erase].

4. Press [] or [] to select [On].

5. Press [MENU] to exit.

English - 27

7.15 I would like to enlarge a part of the image (PAN)

Live image

MASK mode

Spotlight mode

Use Remote control:

1. Press [PAN] to enter the Partial Enlarged mode.

2. Press [] or [] or [] or [] to move and view the partial enlarged

images.

3. Press [PAN] to exit the partial enlarged mode.

7.16 I would like to use the MASK and Spotlight function

7.16.1 I would like to use the MASK or Spotlight mode

Use Remote control:

1. Press [MASK] to enter the Mask mode, and press [] or [] or []
or [] to move the mask position.

2. Press [MASK] again to enter the Spotlight mode, and press [] or
[] or [] or [] to move the zone position.

3. Press [MASK] again to exit and return to the live image screen.

7.16.2 I would like to set the size of Mask/Spotlight function

In Mask/Spotlight mode, use the remote control:

1. Press [MENU] to enter the image OSD menu.

2. Press [] or [] to select the item to be modified
[Transparency/Step/V Size/H Size]. (For details, please refer to

6.2 Setting Menu.)

3. Press [] or [] to perform the modification.

4. Press [MENU] to exit the image OSD menu and return to the
Mask mode.

English - 28

7.17 I would like to play the slides (Slide Show)

7.17.1 Setting delay time

1. Press [MENU] on the remote control or control panel to enter
the setting menu.

2. Press [] or [] to the [Storage] menu.

3. Press [] to find [Delay].

4. Press [] or [] to select image switch mode between [0.5 Sec/1
Sec/3 Sec/5 Sec/10 Sec/Manual].

5. Press [MENU] to exit.

7.17.2 Activating/Pausing/Stopping the slide show

<Note> Upper Limit: The maximum size of single photo is 7 MB.
Remote control:

1. Press [SLIDE SHOW] to start playing.

2. Press [ENTER] to pause playing.

3. Press [ENTER] again to continue playing.

4. Press [SLIDE SHOW] again to stop playing.

Control panel:

1. Press [MENU] to enter the setting menu.

2. Press [] or [] to the [Storage] menu.

3. Press [] to find [Slide Show].

4. Press [ENTER] to play.

5. Press [ENTER] to pause playing.

6. Press [ENTER] again to continue playing.

7. To stop playing, repeat Steps 1 and 4.

English - 29

7.18 I would like to compare images (compare live images

C1

C3

C2

C4

C5

C6

C7

Stored image

Live image

with stored images (PIP))

This function will compare and contrast a live image with a stored image.

Remote control:

1. Press [PIP] to enter the photo selection screen.

2. Press [] or [] or [] or [] to select the file to be compared.

3. Press [ENTER] to activate image comparison.

4. Press [] or [] or [] or [] to move the live image.

5. Press [PLAYBACK] to return to image thumbnails and compare it with
other images.

6. Press [MENU] to exit.

7.19 I would like to reduce the image noise (Projector
Type)

1. This function enables Document Camera to automatically clear image

noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to improve
the image quality.

2. If there is special noise when VGA out is connected, please set DLP

option to improve the image quality.

English - 30

2.1 Press [MENU] on the remote control or control panel to enter

Copy To USB Disk

Yes

No

the setting menu.

2.2 Press [] or [] to the [Setting] menu.

2.3 Press [] to enter [Projector Type].

2.4 Press [] or [] to select [LCD/DLP].

2.5 Press [MENU] to exit.

7.20 I would like to resume the factory default settings
(Factory Reset)

7.20.1 Using OSD menu

1. Press [MENU] on the remote control or control panel to enter
the setting menu.

2. Press [] or [] to select [Advance] menu.

3. Press [] to select [Factory Reset].

4. Press [] or [] to select [Yes].

5. Press [ENTER] to activate.

7.20.2 Use Compound Key

1. Use the control panel, and press [ENTER] + [MENU]
simultaneously to restore the initial value.

<Note> Before using the compound keys, please remove all
VGA-IN devices.

7.21 I would like to use a USB disk

1. Insert the USB disk and a [Copy To USB Disk] dialog box will appear,
and you are asked whether to copy files from PC190 to the USB disk.

 Press [] or [] on the remote control or control panel

to select.

7.22 Computer-related functions

Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to Chapter 4 Installation and

Connections in this User Manual.

English - 31

7.22.1 I would like to insert a photo in MS-Paint

1. Click [File/From Scanner or Camera] in MS-Paint as shown in the
bottom left figure.

2. Click [Get Picture] will capture the photos of live images and insert
the files in use shown as top right figure.

<Remark> Support Windows XP Operation System only.

7.22.2 I would like to insert a photo in MS-Word

<Remark> For Windows Office 2003 or later versions, please
use the function with OneNote.

1. Click [Insert/Image/From Scanner or Camera] in MS-Word.

2. Select [Lumens Document] and click [Custom Insert].

<Remark> For Windows XP, please set by system name (USB
video device)

English - 32

Lumens Document

3. Click [Get Picture]. It will capture the photo of live image.

7.22.3 I would like to change the setting of the PC190 and then
capture a photo in MS-Word

<Remark> For Windows Office 2003 or later versions, please
use the function with OneNote.

1. Click [Insert/Image/From Scanner or Camera] in MS-Word.

2. Select [Lumens Document] and click [Custom Insert].

<Remark> For Windows XP, please set by system name (USB
video device)

English - 33

Lumens Document

3. A window showing a live image (see below) will be displayed.

4. Press [Setting]: To control the PC190 via the Camera Settings

interface. The operating procedure is the same with the remote
control and control panel of the PC190. Refer to Chapter 6 Control

Panel/Remote Control and Setting Menu.

5. Press [Capture] to capture images in MS-Word.

6. Press [Cancel] to exit.

7.22.4 I would like to set the PC190 as a webcam for Skype

The PC190 can be used as a webcam for teleconferencing software
such as Skype or MSN. With Skype as an example, operating
instructions are provided below:

1. Open Skype and enter [Tools] > [Options].

2. Select [Video Settings] > [webcam] > [Lumens Document] and

check Start my video automatically when I am in a call, as shown
below.

<Remark> For Windows XP, please set by system name (USB
video device)

English - 34







Lumens Document

3. Start calling your contact. When both sides are connected, Skype

will display the video screen.

English - 35

7.22.5 I would like to set the PC190 as a PC Camera

Lumens

Document

<Remark> For Windows XP, please set by system name (USB
video device)

Open [My Computer] and click [Lumens Document] to open a live
image.

7.22.6 I would like to connect an Interactive Whiteboard

To connect an Interactive Whiteboard, go to Lumens website to
download the reference guide for a specific brand

(http://www.lumens.com.tw/goto.htm).

English - 36

Chapter 8 Connecting to Microscope

If the eyepiece is Ø 33 mm or Ø 34
mm, only one Lumens
microscope adapter is needed.

If the eyepiece is Ø 28 mm or Ø 31 mm,
you need two microscope adapters.
(1. The Lumens microscope adapter.

2. The microscope adapter suitable
for the eyepiece size Ø 28 mm or Ø 31
mm.)

1 Mount the microscope adapter onto the microscope

<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø 28 mm, Ø 31 mm, Ø 33
mm, and Ø 34 mm.

2 The lens of PC190 connects with the microscope adapter

3 Select the [Microscope] mode

3.1. When using the control panel or remote control

3.1.1. Press [MENU] to enter the setting menu.

3.1.2. Press [] or [] to the [Display].

3.1.3. Press [] to select [Mode].

3.1.4. Press [] or [] to the [Microscope].

4 If the image is not clear

4.1. Please adjust the focus of microscope.

4.2. Please press the [FOCUS] button on either side of the PC190 lens to
activate the auto focus.

5 Digital Zoom

5.1. Press [MENU] to enter the setting menu.

5.2. Press [] or [] to the [Display].

5.3. Press [] to select [Digital Zoom].

5.4. Press [] or [] to the [On].

English - 37

Chapter 9 DIP Switch

<Note> You should unplug and reconnect the power cord, and then restart
the PC190 for all DIP Switch Settings to take effect.

9.1 Connecting to a projector or monitor

9.1.1 XGA output (default values):

9.1.2 SXGA output

9.1.3 WXGA output

English - 38

9.2 Connecting to a TV

9.2.1 NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile, Japan,

Korea, and Mexico

9.2.2 PAL: Countries/regions not listed above

<Remark> Once C-VIDEO is on, VGA OUT is not supported.

English - 39

Chapter 10 Troubleshooting

No.

Problems

Solutions

1

Boot without
power signal

Make sure you have plugged in the power cord.

2

There is no image
output from PC190

1. Check the power.

2. Check all cable connections. Refer to Chapter 4

Installation and Connections in this manual.

3. Check the [Source], refer to 7.2 I would like to

switch image sources of Chapter 7
Descriptions of major functions.

4. Check the settings for the source of the projector.
For the appropriate input selection of the
projector, refer to the projectors user manual.

5. Check if DIP Switch is properly set. Refer to

Chapter 9 DIP Switch Settings for related

settings.

3

Unable to focus

Probably the document is too close. Press [ZOOM -]
on the remote control or control panel. Or pull
away the lens from the document to increase the
distance, and then press the [FOCUS] button on the
right side of the lens.

4

The image is
incomplete

Check the Auto Image setting of your projector.
Please refer to the user manual of the projector or
check for the DIP SWITCH settings.

5

Lumens
Document,
Podium View™
and other
applications
cannot be used
simultaneously

Lumens Document, Podium View™ and other

applications cannot be executed simultaneously.
Only one application can be executed at a time.
Please close the currently running applications and
then execute the application to be used.

6

When the unit is
turned on, the
auxiliary floodlight
do not light.

Please make sure the arm lamp is set to “OFF”. For
the switch-on or -off of arm lamp, please refer to 7.8 I

would like to turn on/off the lamp (LAMP) of
Chapter 7 Descriptions of major functions.

7

PC190 fails to
store images or

1. Check to see if the stored data have reached the
maximum size of the USB device (priority) or

This chapter describes problems you may encounter while using PC190. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center..

English - 40

react.

internal memory.

2. Please make sure if the Capture function is set to
Continuous mode or the time for capture is set to
be long. For the related setting, refer to 7.10 I

would like to capture images of Chapter 7
Descriptions of major functions.

8

The images
outputted from
PC190 are too
bright, dark or
vague.

Press [AUTO TUNE] to automatically adjust to the
optimal brightness and focal length.

9

Unable to record
images

1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or internal
memory.

2. Please confirm the rotation angle. You may not
able to record when the image is rotated by
90°/270°.

10

The operating
steps in the manual
are not applicable
to the machine.

Due to functional upgrade, machine operation
sometimes differs from the instructions in the
manual. Please check if your machine’s Firmware is
the latest version.
1 Please visit Lumens website to check whether the

latest version is available for download.
http://www.lumens.com.tw

2 To verify Firmware version, please refer to 6.2.1

Version query of Chapter 6 Control
Panel/Remote Control and Setting Menu

3 If you still do not know whether it is the latest

version, please consult your distributor.

http://www.lumens.com.tw/tw/support-cf.asp

11

How to release the
locked machine

1. Press [Menu] on Remote Control or Control
Panel to enter the setting menu.

2. Press [] or [] to enter the [Advanced] menu.

3. Press [] to [Lock Down].

4 Press [] or [] to choose [Off], and cancel the

function of setting power-on password.

English - 41