Page 1
User Manual
To download the latest version of Quick Start
DC265
Visual Presenter
[Important]
Guide, multilingual user manual, software, or
driver, etc., please visit Lumens
http://www.lumens.com.tw/goto.htm
English - 0
Page 2
Contents
Copyright Information ....................................................................................... 3
Chapter 1 Precautions .................................................................................... 4
Safety Precautions ....................................................................................... 5
FCC Warning ................................................................................................ 5
EN55022 (CE Radiation) Warning ............................................................... 6
Chapter 2 Package Content ........................................................................... 8
Chapter 3 Product Overview.......................................................................... 9
3.1 Relative position of the presenter and DC265 .................................. 10
3.2 Recommend distance ........................................................................ 10
3.3 Incorrect use ...................................................................................... 11
Chapter 4 Installation and Connections ..................................................... 12
4.1 System diagram................................................................................. 12
4.2 Mounting the DC265 at desktop ........................................................ 13
4.3 Connecting devices ........................................................................... 13
4.4 Start using the DC265 ....................................................................... 16
4.5 Installing remote control holder ......................................................... 16
4.6 Installing application software ........................................................... 17
Chapter 5 DIP Switch Settings .................................................................... 18
5.1 Connecting to a projector or monitor ................................................. 18
5.2 Connecting to a TV ............................................................................ 19
Chapter 6 Control Panel/Remote Control and Setting Menu ................... 20
6.1 Functions of control panel and remote control .................................. 20
6.2 Setting Menu ..................................................................................... 22
English - 1
Page 3
Chapter 7 Descriptions of major functions .................................................... 27
7.1 I would like to switch image sources ................................................. 27
7.2 I would like to make text clearer and photos more colorful ............... 27
7.3 I would like to zoom in /out of images ............................................... 27
7.4 I would like to use the auto focus ...................................................... 27
7.5 I would like to adjust the brightness .................................................. 28
7.6 I would like to turn on/ off the lamp .................................................... 28
7.7 I would like to automatically adjust the image to have best
brightness and focusing performance ............................................... 28
7.8 I would like to capture images ........................................................... 28
7.9 I would like to view captured images ................................................. 29
7.10 I would like to delete captured images .............................................. 29
7.11 I would like to automatically delete the captured images whenever
it is turned off (Auto Erase) ................................................................ 29
7.12 I would like to record videos (Record) ............................................... 30
7.13 I would like to switch a part of the live image (PAN) ......................... 30
7.14 I would like to play the slides (Slide Show) ....................................... 31
7.15 I would like to compare images (Compare live images with
captured images) (PBP, Picture by Picture) ...................................... 31
7.16 I would like to resume the factory default setting (Factory Reset) .... 32
7.17 I would like to reduce the image noise (Projector Type) ................... 33
7.18 I would like to change the Start Logo ................................................ 33
7.19 I would like to set / change the password (Lock Down) .................... 34
7.20 Using a SD card ................................................................................ 35
7.21 Computer-related functions ............................................................... 36
Chapter 8 Connecting to Microscope ......................................................... 41
Chapter 9 Troubleshooting .......................................................................... 43
English - 2
Page 4
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies, nevertheless without any intention
of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.
English - 3
Page 5
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the visual presenter:
1. Do not place visual presenter in tilted position.
2. Do not place the visual presenter on an unstable trolley, stand or table.
3. Do not use the visual presenter near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the visual presenter. If you are not sure of
the type of power available, consult your dealer or local electricity company for
advice
6. Place the visual presenter on a place that it can be unplugged easily.
7. Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extensions leads or multi-way plug boards as this may
cause fire or electric shock.
9. Do not place the visual presenter where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
10. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the projector case. They provide ventilation
and prevent the visual presenter from overheating. Do not place the visual presenter
on a sofa, rug or other soft surface or in a built-in installation unless proper ventilation
is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the visual presenter.
13. Except as specifically instructed in this User Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous
voltages and other hazards. Refer all servicing to licensed service personnel.
14. Unplug the visual presenter during thunderstorms or if it is not going to be used for
an extended period, do not place the visual presenter or remote control on top of
heat-emitting equipment or heated objects such as a car and etc.
English - 4
Page 6
15. Unplug the visual presenter from the wall outlet and refer serving to licensed
This symbol indicates that there
ions in this
service personnel when the following situations happen:
If the power cable or plug becomes damaged or frayed.
If liquid is spilled into it or the visual presenter has been exposed to rain or
water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow your country’s instructions on how to dispose of used
batteries.
Safety Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This visual presenter has a 3-wire AC line Plug. This is a safety feature to ensure that the
plug will fit into the power outlet. Do not try to disable this safety feature.
If the visual presenter will not be used for
outlet.
a long period of time unplug it from the power
CAUTION
Caution: To reduce the risk of electric shock. Do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates that this
equipment may contain
dangerous voltage which
could cause electric shock.
RISK OF ELECTRIC SHOCK
are important operating and
maintenance instruct
User’s Manual with this unit.
FCC Warning
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQU I PME N T.
English - 5
Page 7
Note: This equipment has been tested and found to comply with the limits for a Class A or B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) A Unshielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference to the nearby radio and television reception. It is
essential that only the supplied power cords by used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational environment. It
is not intended for residential use.
This is a Class A product. In a domestic environment it may cause radio interference, in
which case the user may be required to take adequate measures. The typical use is in a
conference room, meeting room or auditorium.
English - 6
Page 8
Revision Note
English - 7
Page 9
Chapter 2 Package Content
DC265
Quick Start Guide
Remote Control Holder
Instruction
Extender Adapter
VGA Cab le
USB Cable
C-Video Cable
Power Cord
Microscope Adapter
(Optional)
Download and Safety
Software Bag
Remote control Audio cable
Appearance may vary with
country/region.
Padded Carry Bag
English - 8
Page 10
Chapter 3 Product Overview
4. LED indicator
3. Control panel
8. Gooseneck
7. AF button
1. Lamp
2. Remote sensor
6. DIP switch
9. Built-in Microphone
5. Lens
(Bottom)
English - 9
Page 11
3.1 Relative position of the presenter and DC265
DC265
3.2 Recommend distance
* About 470 mm distance between camera and the desktop is
recommended.
Document
Presenter
English - 10
Page 12
3.3 Incorrect use
English - 11
Page 13
Chapter 4 Installation and Connections
Speaker (or an amplifier
4.1 System diagram
PC Monitor
Monitor Projector
PC
before connecting to the
speaker)
SD Card LCD TV
PC
Television
English - 12
Page 14
4.2 Mounting the DC265 at desktop
1. Please set up the DIP Switch settings first. Refer to Chapter 5 “DIP
Switch Settings” in the DC265 user manual.
2. Please refer to the Base Installation Guide for installation instructions
for all parts.
4.3 Connecting devices
4.3.1 Step 1: Plugging in the power outlet
AC Outlet
<Note> Appearance of power cord may vary with countries/regions.
4.3.2 Step 2: Connecting with components
Connecting to a projector
Connect the V G A O U T on the DC265 to the VGA IN on the projector
using the VGA cable.
Connecting to a monitor
Use VGA cable to connect VGA PASSTHROUGH connector on DC265
to the VGA IN connector on a monitor.
[Note] The VGA PASSTHROUGH connector only outputs VGA IN
signals.
English - 13
Page 15
Connecting to a TV
1. Using EXTENDER adapter and C-Video cable to connect EXTENDER
of DC265 to a C-Video of TV.
2. Adjust DIP Switch Setting
NTSC: America, Taiwan, Panama, Philippine, Canada, Chile, Japan, Korea and
Mexico
PAL: Country/region not listed above:
<Note> OSD is not available in C-Video. Functions such as [Menu] /
[Rotate] / [PAN] / [Source] / [Record] / [Capture] / [Delete] / [PBP] / [Slide
Show] are not available on control panel and the remote control.
<Note> VGA output is not supported once C-Video output is enabled.
3. DIP Switch setting will not be available until restarting the DC265
Connecting to a LCD TV/ PDP
Using the HDMI cable to connect a LCD TV/ PDP
English - 14
Page 16
Connecting to a computer
Use VGA cable to connect VGA IN connector on DC265 to the VGA
OUT connector on the computer
Using the USB Cable
Connect to USB port then install the supplied Ladibug™
program. Please refer to the DC265 User Manual
Using the EXTENDER adapter and RS232 Cable to connect
EXTENDER of DC265 to a RS232 of computer
.
Connecting to speaker
<Remark>: Or connect to an additional amplifier before connecting
to the speaker.
English - 15
Speaker
Page 17
4.4 Start using the DC265
Control Panel
Remote Control
When using the remote control, aim at the receptor on the DC265,
and press the power button.
Once DC265 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
<Note> Once the password page is shown , please key in the
password. If you forget it, please contact your distributor or the
service center.
4.5 Installing remote control holder
Insert the holder over the gooseneck of the camera and push it down.
English - 16
Page 18
4.6 Installing application software
After installing the USB driver and application software, you can use the
following functions:
Control the DC265.
Capture and record images.
Annotate the image, highlight important details and save it.
Support the full screen function.
<Note>: Please refer to Ladibug™ software user manual for installation
steps and software operation.
English - 17
Page 19
Chapter 5 DIP Switch Settings
<Note> You have to reset the unit for setting to take affect.
5.1 Connecting to a projector or monitor
5.1.1 SXGA 60Hz output (default values):
5.1.2 XGA 60 Hz output
5.1.3 Special mode
5.1.4 HDTV 720P 60Hz output
English - 18
Page 20
5.2 Connecting to a TV
5.2.1 NTSC: America, Taiwan, Panama, Philippines, Canada,
Chile, Japan, Korea and Mexico
5.2.2 PAL: Countries/regions not listed above.
<Remark> VGA output is not supported once C-Video output has
been enabled.
English - 19
Page 21
Chapter 6 Control Panel/Remote Control
Name
Function
Operation
function.
Control panel
Camera Head
brightness and focusing performance.
Control panel
internal memory.
Control panel
Control panel
the screen. Press again to defreeze.
Control panel
Lamp
Turn on / off the lamp.
Control panel
Control panel
and Setting Menu
6.1 Functions of control panel and remote control
<NOTE>: OSD is not available at C-Video mode. [Menu] / [Rotate] / [PAN] /
[Source] / [Record] / [Capture] / [Delete] / [PBP] / [Slide Show] functions are
not available on the machine panel and the remote control.
<Remark> The below functions are listed alphabetically.
AF
Auto Tune
BRT+/-
Capture
Delete
Enter
Freeze
Menu
Turn on and off the visual presenter.
Move up, down, left or right to select the needed
Automatically adjust focal length on an object.
Automatically adjust the image to have the best
Manually adjust the brightness of the image.
Capture the image to the SD card (priority) or
Delete the image stored in the SD card (priority)
or internal memory.
Enter/Activate functions.
Freeze the current image to temporarily stay on
Activate the setting menu function/exit menu.
Remote control /
Control panel
Remote control /
Remote control /
Control panel
Remote control /
Remote control /
Control panel
Remote control /
Remote control /
Remote control /
PAN
Switch a part of the live image
English - 20
Remote control /
Control panel
Page 22
PBP
recording.
(priority) or internal memory in slide mode.
3. Computer
Control panel
Record
Compare live images with captured images.
Record motion images. Press [Record] to record
images to SD card, press [Record] again to stop
Remote control
Remote control /
Control panel
Rotate
Slide Show
Source
Zoom +/-
Rotate the image by 0°/90°/180°/270°.
Show the photos or videos stored in the SD card
Switch between different sources of signals:
1. Live images (default)
2. SD card (priority) or internal memory
Increase or decrease the image size.
Remote control /
Control panel
Remote control
Remote control /
Control panel
Remote control /
English - 21
Page 23
6.2 Setting Menu
Use the left and right arrow
Use the left and right arrow
Use the left and right arrow
Press [Enter] to immediately
Use the left and right arrow
<Remark> Press [Menu] on the remote control or control panel to enter the
setting menu; The bold underlined values in the following table are the
defaults.
1st Level
Major
Items
2nd Level
Minor Items
3rd Level
Adjustment
values
Descriptions
Display
Focus 0~Max
Mode
Photo/Text Photo/Text/Gray
PBP Enter
Night Vision On/Off
Digital Zoom On/Off
Slide Show
Normal/Slide/
Film/Microscope
Enter
keys to adjust focal length on
an object
keys to select the image
mode.
keys to select the image
mode.
activate photo comparison
mode.
keys to select. The night
vision mode suits with darker
environment.
Use the left and right arrow
keys to turn digital zoom
on/off.
Press [Enter] to play the
photos or videos stored in the
SD card (priority) or internal
memory.
Storage
Slide Show
Effect
English - 22
1. Off
2. Shutter
3. Right
4. Down
5. Side
6. Open
Use the left and right arrow
keys to select the image
switch mode.
Page 24
1. 0.5 Sec
Use the left and right arrow
(Single/Continuous/Disable)
5. 24 hr
[continuous].
2. 1 Sec
Delay
Image Quality
Copy To SD Enter
Delete All Yes/No
Format Yes/No
3. 3 Sec
4. 5 Sec
5. 10 Sec
6. Manual
1. High
2. Medium
3. Low
Use the left and right arrow
keys to select the delay time.
Select manual mode to switch
images manually.
keys to select the image
quality for the captured
images and recorded videos.
Press [Enter] to immediately
copy the data in visual
presenter to the SD card.
Use the left and right arrow
keys to select, and then press
[Enter] to confirm the deletion
of photos.
Delete the image stored in the
SD card (priority) or internal
memory.
Use the left and right arrow
keys to select, and then press
[Enter] to format the data
stored in the SD card (priority)
or internal memory.
Capture
Setting
Capture Time
English - 23
1. Single
2. Continuous
3. Disable
1. 1 hr
2. 2 hr
3. 4 hr
4. 8 hr
Use the left and right arrow
keys to select the video
capture mode.
Use the left and right arrow
keys to set the capture time.
<Note> It only works when the
capture mode is set to
Page 25
1. 5 sec
6. 5 min
Use the left and right arrow
Regardless of outside
Use the left and right arrow
2. 10 sec
Capture
Interval
USB Transfer
AE On/Off
AWB Enter
3. 30 sec
4. 1 min
5. 2 min
1. Camera
2. Storage device
Use the left and right arrow
keys to set the capture
interval. <Note> It only works
when the capture mode is set
to [continuous].
keys to select the USB
transfer mode.
1.Camera: connecting the
DC265 to view live image;
2.Storage device: connecting
to the SD card (priority) or
internal memory.
environment, the machine will
adjust the brightness to the
optimal condition.
Use the left and right arrow
keys to select.
Regardless of outside light or
color, the machine will adjust
the color to the optimal
condition. Press [Enter] to
activate.
Projector
Type
Volume 0~Max
English - 24
DLP/LCD
Use the left and right arrow
keys to turn on/off the noise
reduction function.
keys to adjust the volume.
Page 26
1. English
2. 繁体中文
English
Use the left and right arrow
Use the left and right arrow
Traditional Chinese
Advanced
Language
Output Mode
3. Deutsch
4. Français
5. Español
6. Русский
7. Nederlands
8. Suomi
9. Polski
10. Italiano
11. Português
12. Svenska
13. Česky
1. XGA
2. SXGA
3. UXGA
4. 720P
5. 1080P
German
French
Spanish
Russian
Dutch
Finnish
Polish
Italian
Portuguese
Swedish
Czech
Use the left and right arrow
keys in the language option to
select the preferred language.
Based on different DIP switch
settings, different output
modes are provided. Refer to
Chapter 5 DIP “Switch
Settings” in the DC265 user
manual.
Lock Down On/Off
Auto Erase On/Off
English - 25
keys to turn the lock down
function on and off. You can
set the password when [On] is
selected.
keys to turn the auto erase
function on and off. When
[On] is selected, the saved
images will automatically be
deleted when the system is
turned off.
Page 27
Preset Load Yes/No
Use the left and right arrow
Preset Save Yes/No
Read the value of the current
image mode.
Use the left and right arrow
keys to select, and then press
[Enter] to confirm.
Save the value of the current
image mode.
Use the left and right arrow
keys to select, and then press
[Enter] to confirm.
Factory Reset Yes/No
keys to select, and then
immediately press [Enter] to
activate the factory reset.
English - 26
Page 28
Chapter 7 Descriptions of major functions
7.1 I would like to switch image sources
Live image is the default of image source. Press [Source] on the remote
control or control panel to change:
1. Live images (default)
2. SD card (priority) or internal memory
3. Computer.
7.2 I would like to make text clearer and photos more
colorful
Photo is the default. You can change setting via the remote control or
control panel.
[Photo](default): for viewing photos or text with photos and will make
the photos more colorful.
[Te x t]: for viewing text files and will make the text clearer.
[Gray]: for viewing black and white photos and will make the
grayscale differentiation more distinct.
If you use the remote control or the control panel:
1. Press [MENU] to enter the setting menu.
2. Press [] or [] to select [Display].
3. Press [] to select [Photo/Text].
4. Press [] or [] to select [Photo/Text/Gray] (Refer to the description
above).
5. Press [MENU] to exit.
7.3 I would like to zoom in /out of images
1. Press [Zoom +] on the remote control or control panel to zoom in.
2. Press [Zoom -] on the remote control or control panel to zoom out.
7.4 I would like to use the auto focus
1. Press [AF] on the remote control.
2. Press the AF button on the camera head of main unit.
English - 27
Page 29
7.5 I would like to adjust the brightness
If you use the remote control or the control panel:
1. Press [BRT +] to make it brighter.
2. Press [BRT -] to make it darker.
7.6 I would like to turn on/ off the lamp
1. The default of lamp is turn on. Press [Lamp] on the control panel to turn
off.
7.7 I would like to automatically adjust the image to have
best brightness and focusing performance
1. Press [Auto Tune] on the control panel.
7.8 I would like to capture images
7.8.1 Setting the quality of captured images
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to the [Storage].
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [Menu] to exit.
7.8.2 Setting continuous capture
1. Press [Menu] on the remote control or control panel to enter the
setting menu
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [Capture].
4. Press [] or [] to select [continuous].
5. Press [] to find [Capture Time]. Press [] or [] to select time
settings.
6. Press [] to find [Capture Interval]. Press [] or [] to select time
settings.
7. Press [Menu] to exit.
English - 28
Page 30
7.8.3 Capturing and saving images
1. Press [Capture] on the remote control or control panel .
<Note> If the capture mode is set to [continuous], press
[Capture] to capture images continuously, press [Capture]
again to exit.
7.9 I would like to view captured images
1. Press [Source] on the remote control or control panel to display
thumbnails of all captured images.
2. Press [] or [] or [] or [] to select the thumbnail you want you view.
3. Press [Enter] for the full-screen display of the image.
4. Press [] or [] to turn to the previous/next image.
5. Press [Source] to exit.
7.10 I would like to delete captured images
1. Press [Source] on the control panel.
2. Press [] or [] or [] or [] to select the thumbnail you want you
delete.
3. Pressing [Delete] will open a [Delete File] window.
4. Press [] or [] to select [Ye s ] (The default value is No).
5. Press [Enter] to delete the selected photo.
6. Press [Source] to exit.
7.11 I would like to automatically delete the captured
images whenever it is turned off (Auto Erase)
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to access the [Advanced] menu.
3. Press [] or [] to [Auto Erase].
4. Press [] to select [On].
5. Press [Menu] to exit.
6. It will automatically delete all captured photos when it is turned off.
English - 29
Page 31
7.12 I would like to record videos (Record)
7.12.1 Setting the image quality
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage].
3. Press [] to [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [Menu] to exit.
7.12.2 Recording motion images
1. Press [Record] on the remote control or control panel to start
recording videos.
2. Press [Record] again to stop recording.
3. Record sounds with the built-in microphone of the control panel.
7.12.3 Playing videos
1. Press [Source] on the remote control or control panel to display
thumbnails of all video recorded.
2. Press [] or [] or [] or [] to select the thumbnail you want you
view.
3. Press [Enter] for full-screen play.
4. Press [] or [] to turn to the previous/next video.
5. Press [Source] to exit.
[Note] Only the MOV files recorded can be played and live sound
output is not available; additional amplifier can be connected to
the PHONE port.
7.13 I would like to switch a part of the live image (PAN)
If you use the remote control or the control panel:
1. Press [PAN] to enter the image pan mode
2. Press [] or [] or [] or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.
English - 30
Page 32
7.14 I would like to play the slides (Slide Show)
7.14.1 Setting the slide show effect
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] to find the [Slide Show Effect].
4. Press [] or [] to select image switch mode between [Off /
Shutter / Right / Down / Side / Open].
5. Press [Menu] to exit.
7.14.2 Setting delay time
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] to find the [Delay].
4. Press [] or [] to select image switch mode between [0.5 Sec /
1 Sec / 3 Sec / 5 Sec / 10 Sec / Manual].
5. Press [Menu] to exit.
7.14.3 Activating/Stopping the slide show
<Notes>Images over 8 MB, cannot be played. Whilst playing, the
[Rotate]
Remote control:
Control panel:
function can be activated to rotate the images.
1. Press [Slide Show] to start playing.
2. Press [Slide Show] again to stop playing.
1. Press [Menu] to enter the setting menu.
2. Press [] or [] to access the [Storage] menu.
3. Press [] to find [Slide Show]
4. Press [Enter] to play.
5. To stop playing, repeat steps 1 to 4.
7.15 I would like to compare images (Compare live images
with captured images) (PBP, Picture by Picture)
This function will compare and contrast a live image with a captured image.
English - 31
Page 33
C2 C1
C3 C4
C6 C5 C7
Captured Image
Live Image
Remote control:
1. Press [PBP] to enter the PBP (Picture by Picture) photo selection
screen.
2. Press [] or [] or [] or [] to select the files to be compared.
3. Press [Enter] to activate the image comparison.
4. Press [] or [] to move the images (captured images only)
leftward/rightward.
5. Press [Menu] again to return to image thumbnails.
6. Press [Source] to exit.
Control panel:
1. Press [Menu] to enter the setting menu.
2. Press [] or [] to access the [Display] menu.
3. Press [] to find [PBP]
4. Press [Enter] to enter the PBP (Picture by Picture) photo selection
screen.
5. Press [] or [] or [] or [] to select the files to be compared.
6. Press [Enter] to activate the image comparison.
7. Press [] or [] to move the images (captured images only)
leftward/rightward.
8. Press [Menu] again to return to image thumbnails.
9. Press [Source] to exit.
7.16 I would like to resume the factory default setting
(Factory Reset)
1. Press[Menu]on the remote control or control panel to enter the
setting menu
English - 32
Page 34
2. Press [] or [] to access the [Advanced] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [ Ye s ].
5. Press [Enter] to activate.
7.17 I would like to reduce the image noise (Projector
Type)
This function enables visual presenter to automatically clear image noise.
The noise is especially obvious when Visual presenter is connected to a
DLP projector. You can use this function to improve the image quality.
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting].
3. Press [] to [Projector Type].
4. Press [] or [] to select [DLP/LCD].
5. Press [Menu] to exit.
7.18 I would like to change the Start Logo
<Remark> The Start Logo file (.jpg) should be less than 5MB.
1. Press [DELETE] + [] on the control panel to enter Service Menu.
2. Press [] or [] to select [Logo].
3. Press [] to [Image], and press [ENTER] to read the stored files.
4. Press [], [], [] or [] to select a file, and press [ENTER] to apply
the change.
5. Press [] to [Loge Select], and press [] or [] to select
[Customer Logo].
English - 33
Page 35
6. Press [] to [Logo Show time], and press [] or [] to modify the show
＊ ＊
time.
7. Press [MENU] to exit.
7.19 I would like to set / change the password (Lock Down)
7.19.1 Setting the password
1. Press [Menu] on the control panel to enter the setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] to [Lock Down].
4. Press [] or [] to select [On].
5. The screen will be displayed, as shown below.
6. Key in the password
Press the keys on the control panel. All keys can be used as
part of the password except the [Power] and [Enter] keys. The
maximum number of characters is 2. For example, you can
press [Source] + [Menu] as the password.
<Remark>The screen will show * while you enter the
password. Ensure that you remember the order in which
the keys are entered.
7. After completing the password, press [Enter].
8. The confirmation screen will be displayed, as shown below.
Enter the password again.
9. After you enter the password, press [Enter].
If the password is entered correctly, setup is completed. If the
password is incorrect, an error message is displayed and please
follows the screen instructions.
Key in Password
Confirm password
English - 34
Page 36
7.19.2 Changing the password
1. Press [Menu] on the control panel to enter the setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] to [Lock Down]
4. Press [] or [] to select [Off] and deactivate the password
setting function.
5. Press [] or [] to select [On] and reactivate the password
setting function. Refer to Steps 5-8 in DC265 User Manual
Chapter 7 Descriptions of major functions 7.18.1 Setting
the password for operational steps.
7.20 Using a SD card
7.20.1 Deactivate the write protect function (SD Lock)
If the write protect function of the SD card is activated, you will not be able
to use the Capture function, although you can still read the files in it.
Adjust the Lock of the SD card to deactivate the write protect function.
7.20.2 Inserting a SD card
7.20.2.1 The screen will display [Copy to SD card] and ask if you
would like to copy the files saved in the DC265 to a SD card.
Press [] or [] on the control panel to select.
English - 35
Copy to SD Card
YES
NO
Page 37
7.20.2.2 The screen will display as follow, once you insert an
Format SD Card
unformatted SD card.
Press [] or [] on the control panel to select.
<Note> The data previously saved on the SD card will be
erased when it is formatting.
YES
7.20.3 Ejecting a SD card
<Note> Turn the power off before ejecting the SD card to
avoid damaging the SD card.
7.21 Computer-related functions
Ensure that the USB cable is connected and the drivers are installed
before using the computer-related functions. Refer to DC265 User Manual
Chapter 4 Installation and Connections 4.3 Connecting Devices and
4.6 Installing application software.
NO
7.21.1 I would like to insert a photo in MS-Paint
1. Click File> From Scanner or Camera in MS-Paint shown as the
bottom left figure.
English - 36
Page 38
2. Click [Get Picture] will capture the photos of live images and insert
the files in use shown as top right figure.
7.21.2 I would like to insert a photo in MS-Word
<Remark>: For Windows Office 2003 or later versions, please use the
function with OneNote.
1. Click Insert > Image > From Scanner or Camera in MS-Word.
2. Select [Visual Presenter V2] and click [Custom Insert].
3. Click [Get Picture]. It will capture the photo of live image.
English - 37
Page 39
7.21.3 I would like to change the setting of DC265 then capture
a photo in MS-Word
<Remark>: For Windows Office 2003 or later versions, please use the
function with OneNote.
1. Click Insert > Image > From Scanner or Camera in MS-Word.
2. Select [Visual Presenter V2 TWAIN] and click [Custom Insert].
3. A window showing a live image (see below) will be displayed.
English - 38
Page 40
4. Press [Setting] to control the DC265 via the Camera Settings
interface. The operating procedure is the same with the remote
control and control panel of the DC265. Refer to DC265 User
Manual Chapter 6 Control Panel / Remote Control and Setting
Menu.
5. Press [Setting] to capture images in MS-Word.
6. Press [Cancel] to exit.
7.21.4 I would like to set the DC265 as a PC Camera
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [USB Transfer].
4. Press [] or [] to select [Camera].
5. A window will be displayed, showing the [Visual Presenter V2], as
shown below
6. Click the [Visual Presenter V2].
7.21.5 I would like to set the DC265 as a Removable Disc
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
English - 39
Page 41
3. Press [] to find [USB Transfer].
4. Press [] or [] to select [Storage device].
5. Press [Menu] to exit.
6. A Removable Disc will be displayed.
<Remark> The Removable Disc will select SD card if a SD card has
been inserted, but if a SD card has not been inserted, the Removable
Disc is internal memory.
<Note> Doing this will disable the Capture function. Suggest you
return it to
the steps below.
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [USB Transfer].
4. Press [] or [] to select [Camera].
5. Press [Menu] to exit.
[Camera] mode after using this function. Please follow
English - 40
Page 42
Chapter 8 Connecting to Microscope
1. Mount the microscope adaptor onto the microscope.
<Note> Please choose an appropriate microscope adapter. Microscope
adapter accessories are applicable to eyepieces of Ø28mm, Ø31mm,
Ø33mm, and Ø34mm.
2. The lens of DC265 connects with the microscope adaptor.
For eyepieces of about Ø33mm
and Ø34mm, only one
microscope adapter is needed
(please choose the one with
maximum diameter).
For eyepieces of about Ø28mm or
Ø31mm, please choose the
microscope adapter with maximum
diameter along with another
appropriate microscope adapter.
3. Select the [Microscope] Mode
3.1. If you use the remote control or the control panel
3.1.1. Press [MENU] to enter the setting menu.
3.1.2. Press [] or [] to select [Display].
3.1.3. Press [] to select [Mode].
3.1.4. Press [] or [] to select [Microscope].
4. If the image is not clear.
4.1. Please adjust the focus of microscope.
4.2. Press the AF button on the camera head of main unit to activate the
auto focus.
English - 41
Page 43
5. Digital Zoom
5.1. Press [MENU] to enter the setting menu.
5.2. Press [] or [] to the [Setting].
5.3. Press [] to select [Digital Zoom].
5.4. Press [] or [] to select [On].
5.5. Press [Zoom +]/[Zoom -] on the remote control and control panel
<Note> In microscope mode all functions are available except for the
[Zoom +] / [Zoom -] / [PAN] functions on the remote control and control
panel. Please reset to normal mode after using the microscope,
otherwise, you are unable to use zoom in/out function.
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to select [Display].
3. Press [] to select [Mode].
4. Press [] or [] to select [Normal].
English - 42
Page 44
Chapter 9 Troubleshooting
No.
Issues
Solutions
power
No image output
Settings3 for related settings.
press [AF].
The image is
projector.
turning on
Visual Presenter
simultaneously
Visual Presenter V1, Ladibug™ and other
This chapter describes problems you may encounter while using DC265. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center.
1
2
4
5
Boot without
from the DC265
Unable to focus
incomplete
Forget the
password for
Make sure you have plugged in the power cord.
1. Check the power.
2. Check the connection, Refer to
Manual Chapter 4 Installation and
Connections 4.3 Connecting Devices
3. Check the [Source], refer to
Chapter 7 Descriptions of major functions 7.1
I would like to switch image sources
4. Check the settings for the source of the
projector. For the appropriate input selection of
the projector, refer to the projectors user manual
5. Check if DIP Switch is properly set. Refer
DC265 User Manual Chapter 5 DIP Switch
to
Probably the document is too close. Press [zoom -]
on the remote control or control panel. Or pull
away the distance between document and lens, then
Check the Auto Image setting of your
projector. Please refer to the user manual of the
Please contact your distributor or the service center.
DC265 User
DC265 User Manual
6
V1, Ladibug™ or
other application
cannot be
executed
English - 43
applications cannot be executed simultaneously.
Only one application can be executed at a
time. Please close the currently running applications
and then execute the application to be used.
Loading...