Luma 300 Series Operation Manual

300 Series Turret

HD Analog Surveillance Camera

Installation &

Operation

Manual

2

Luma 300 Series Turret Camera

Installation

Before you start, ensure that the device is in good
condition and all the assembly parts are included.

} Make sure that all equipment is powered off

during installation.

} Ensure the wall is strong enough to hold three

times the weight of the camera and the mount.

} If the mounting surface is cement, use the

included expansion screws to install the
camera. If mounting to a wood surface, use
self-tapping wood screws (not included) to
secure the camera.

} If the product does not function properly,

please contact technical support. Do
not disassemble the camera for repair or
maintenance.

3

Luma 300 Series Turret Camera

Wiring Advisory

We recommend installing with RG-59 or RG-6
cabling with two-wire power (either regular or
siamese). This provides better performance over
distance than using traditional category cable
with baluns.

For more details on the cameras or cables, see the
product page at SnapAV.com.

4

Luma 300 Series Turret Camera

Box Contents

} Camera
} Mounting bracket
} Self-adhesive mounting template
} 3 x wall anchors with screws
} 3mm hex wrench

Other Required Equipment

Aside from the contents of this box, you will need

} Phillips screwdriver
} Power source: 12V DC