Lowrance LMS-480M, LMS-480MDF, NMEA 2000 60-OHM TERMINATOR, 60-OHM TERMINATOR User Manual
Pub. 988-0154-061
60-Ohm Terminator
Installation Instructions
This package contains a 60-Ohm terminator for use with a Lowrance
product running an LGC-2000 GPS module.
NOTE:
The LGC-2000 will not operate unless connected to a terminated
circuit. If you are not connecting the LGC-2000 to an existing NMEA
2000 buss (as described in the LGC-2000 instruction sheet, part 9880147-981), you must attach this 60-Ohm terminator to the shorter
branch on the LGC-2000's 25-foot Y-adapter extension cable.
To unit's Network
socket
60-Ohm
terminator
To
NMEA 2000 buss
LGC-2000 Y-adapter extension cable with 60-Ohm terminator.
The LGC-2000 extension cable's Y-adapter should come packaged with
this 60-Ohm terminator already attached to it. Do not remove this
terminator unless you're connecting the module to an existing
NMEA 2000 buss. If you've purchased this terminator as a replace-
ment, attach it as shown in the image above.
NOTE:
An existing operational NMEA 2000 buss will already have terminators in place and will already be powered. If you're connecting to such a
network, you won't need the terminators or extension cable provided.
Do not add terminators to a functional NMEA 2000 buss!
Pub. 988-00154-061 © Copyright 2004
All Rights Reserved
Printed in Mexico 011604 LEI Extras, Inc.
Loading...