Louroe Electronics AP-1TB Specsheet

AUDIO BASE STATIONS

®

AP-1TB

TECHNICAL DATA SHEET

DESCRIPTION

The AP-1TB is a single zone audio monitoring base station designed
for two-way listen/talkback. As part of a complete system audio can be
monitored by manually pressing the zone activation switch. It has
input-output to a DVR/VCR for recording and playback. Contains a 4”
speaker for monitoring live audio and playback from a DVR/VCR. A 24
Vdc power supply is included. For two-way listen/talkback, all Louroe
Speaker/Microphones (TLI, TLO, TLM, TLMC, or TLSP) are
compatible.

APPLICATION

When part of a Louroe Audio System, the AP-1TB Base Station can
be used in situations such as:

Sleep Disorder Labs
Therapy Labs
Classrooms
Heart Catheter Labs
Convenience Stores

Observations Rooms
Warehouses
Fast Food Restaurants
Anywhere CCTV Cameras Are
Installed

FEATURES

Built-in 4" speaker for monitoring
audio

Buil-in amplifier for playback from
DVR/VCR

Provides two-wy listen/talkback
using Louroe Speaker/Microphone

Built-in microophone for talkback to
remote monitoring

AP-1TB

3.5 mm headphone jack for private
monitoring

Can be desktop or wall mounted
using teardrop cutouts on bottom
of chassis

Desktop model. Kit available for
19" rack mounting. Request
RM01935-AP-1Tb

WIRING REQUIREMENTS

4 Conductor consisting of: 2 Conductor shielded cable, 20 gauge
with a 22 gauge drain (microphone connection), 2 Conductior
unshielded, 18 gauge (speaker connection).

IMPORTANT NOTICE

When this equipment is used as part of an audio
monitoring system, the law requires that the
public be given notice of AUDIO MONITORING
ON THE PREMISES. A decal notice is included
with each microphone shipped.

FEDERAL LAW REFERENCES:

Federal Regulations, US Code, Title 18. Crime

and Criminal Procedure, Sec 2510.

MANUFACTURED

IN THE

AUDIO

MONITORING

On

These Premises

®

SPECIFICATIONS

Input sensitivity (from remote mic)
Input sensivity (talk-back microphone)
Monitoring power output
Talkback power output (max)
Audio output impedance
Audio input impedance
Audio frequency response
Headphone impedance
Dimensions
Weight

0.78Vrms

-45dB

1.5W @8Ω

5W into 70V line

600Ω
10kΩ

100 Hz to 10 kHz

8 to 600Ω

8"W x 10"D x 2¼”H

5.5 lbs (2.5kg)

WARRANTY

LOUROE ELECTRONICS® warrants that at the time of shipment products manufactured
by LOUROE ELECTRONICS to be free of defects in material and workmanship. Should a
defect appear within one year (12 months) from date of shipment, LOUROE
ELECTRONICS will, at its sole discretion, repair or replace the defective equipment. This
equipment shall not be accepted for repair or return without prior notification by LOUROE
ELECTRONICS .

This warranty does not extend to any Louroe product that has been subjected to improper
or incorrect installation, misuse, accident, or in violation of installation instructions provided
by LOUROE ELECTRONICS.

Returned shipments to LOUROE ELECTRONICS shall be at customer’s expense.
LOUROE ELECTRONICS will return the equipment prepaid via best way.

LOUROE ELECTRONICS 6955 VALJEAN AVENUE | VAN NUYS, CA 91406 | TEL [phone] FAX [phone]

®

www.louroe.com | e-mail: [e-mail] / [e-mail]

audiobasestations/twowaytalklisten/ap1tb_louroe