
L
OUROE
E
6955 VALJEAN AVE, VAN NUYS, CA 91406
LEC TR ON IC S
PH: (818)994-6498 / FAX: (818)994-6458
sales@louroe.com / www.louroe.com
AOP-SP-CF/AOP-SP-CS
BI-DIRECTIONAL SPEAKERPHONE
DESCRIPTION
Model AOP-SP-CF and AOP-SP-CS are ceiling mount
speakerphones designed to interface with various modes of
audio/video transmission systems. They provide bi-directional
audio with the receiving source (DVR, PC soundcard,
network cameras with audio and video servers with audio
IP
,
etc). Both AOP-SP-CF and AOP-SP-CS contain a built-in
electret condenser microphone and a 4” speaker. Also a
control potentiometer for adjusting the sensitivity of both
transmitted and received audio.
AOP-SP-CF is for Flush mounting to ceiling
AOP-SP-CS is for Surface mounting to ceiling
APPLICATION
Model AOP-SP-CF and AOP-SP-CS have the electronics to
provide two-way/talk-listen audio with the following
transmission systems:
,
DVR’s
,
IP N e t w o r k C a m e r a s
,
PC Soundcards
,
Vi d e o S e r v e r s
,
The above systems can be used as stand alone units or
with Louroe Model AOP-XD audio transceiver interface.
The AOP-XD provides power to the AOP-SP-CF/CS,
contains level controls for 2-way communication and
provides audio filtering to enhance the quality of sound.
TECHNICAL DATA SHEET
MODEL AOP-SP-CF
2-way Speakerphone
Ceiling Mount-Flush
MODEL AOP-SP-CS
2-way Speakerphone
Ceiling Mount-Surface
FEATURES
+
Omni-directional microphone and 4" speaker
+
Controls for adjusting volume of both listen
and talkback
+
Flush or surface ceiling mount models
+
Hands-free operation for talk/listen
SPECIFICATIONS (Microphone)
Type
Audio output
Microphone element sensitivity
Frequency response
Audio Input Impedance
Electret Condenser
Line level (0 dB @ 600Ω)
unbalanced
-45 dB
40 Hz - 10 kHz
600Ω
WIRING REQUIREMENTS
3 Conductor consisting of:
+
2 Conductor shielded, 20 gauge
with 22 gauge drain
+
1 Conductor unshielded, 20 gauge
All in the same jacket
SPECIFICATIONS (Mechanical)
AOP-SP - CF/CS (grill)
AOP-SP-CF (backbox) for flush mount
Inside
Flange
Depth
AOP-SP-CS MR8 (Mounting Ring)
for surface mount
SPECIFICATIONS (Speaker)
R
U
E
T
D
C
A
I
N
F
U
N
A
M
T
H
E
12 7/8” (327mm)
9 ¾” (247mm)
12 5/16” (313mm)
4 ½” (114mm)
12 3/8” X 3”H (314mm H x 76mm)
Speaker power output
Speaker impedance
Speaker magnet
Speaker size
Current Drain
Supply Voltage
Weight,net (AOP-SP-CF) 2.5 Lbs ( 1.1 Kg)
Weight, (AOP-SP-CS) with MR-8 5 Lbs (2.3 Kg)
1.5W
8Ω
3 oz. ceramic
4” (102mm)
200mA
12Vdc
When this equipment is used as part of an audio monitoring system, the
law requires that the public be given notice of AUDIO MONITORING ON
THE PREMISES. A decal notice is included with each microphone
shipped.
Federal Law References:
Federal Regulations, US Code, Title 18. Crime and Criminal Procedure,
Sec 2510.
IMPORTANT NOTICE
AUDIO
MONITORING
On
These Premises
OUROE
L
LECTRONICS
E
aop-sp cf_cs 11/09