LORE X
Contents:
LOREX
LIVE SD 3.5
Add-on Camera
Quick Start Guide
TIP
Day/Night
Long Range
Multi-View Secure
Security Clips
Camera Power Adapter
Before you install the camera, carefully plan where and how it will be positioned,
and where you will route the cable that connects the camera to the power adaptor.
Avoid installing in a location which requires the wireless signal to pass through
cement, concrete and metal structures. This will reduce the transmission range.
Powering the Camera
1. Connect the Power Adaptor to the 5V Input on the back of
the camera.
2. Connect the power adapter to a power outlet.
OPTIONAL: You can use ‘AA’ batteries or a rechargable battery pack to power
the camera. Please refer to Appendix A in the Owner’s Manual for instructions.
Battery operation is suggested for temporary monitoring only.
3. Slide the power switch to the ON position.
Pairing the Camera
Place the camera and video monitor 12 inches apart.
1
Turn on the camera first and then the video monitor.
1
NOTE:
• Only use the included power adapter to charge the camera(s).
2 3
3
Press the Menu button on the monitor, then select
2
Pairing and press the OK button.
Select an available channel, and press the OK button.
3
NOTE: By default, the camera included with the
system is paired to channel 1.
Press the Pair button behind the camera within 30
4
seconds.
You should immediately see video from the camera on
the video monitor.
NOTE:
• To pair multiple cameras, repeat steps 2~4,
selecting a different channel in the pairing menu.
• You can add a maximum of four (4) wireless
cameras to the video monitor.
FOR MORE INFORMATION:
www.lorextechnology.com
Pair Button
4
Press the Pair button during
the pairing process with the
video monitor.
LW2401AC1 QSG_EN_R1 Page 1