Lorex LW2220 Quick Start Manual
WIRELESS DIGITAL SECURITY CAMERA
LW2220 SERIES
QUICK START GUIDE
A. Installing the Camera
Mount camera stand to the wall.
1
2
Screw the
antenna to the
back of the
camera.
Screw the camera onto
the head of the stand(1).
3
Adjust the angle of the
camera until the desired
view is set. Tighten the
thumbscrew to secure the
camera position (2).
1 2
Connect one end of the camera
4
power adapter to the camera
and the other end to an
electrical outlet.
Getting Started
This wireless digital security
camera system comes with the
following components:
• Digital wireless color camera
with sunshade
• Camera stand
• Wireless receiver
• Antenna’s for camera and
receiver
• Power adaptors for camera and
receiver
• RCA/BNC adapter
• Mounting hardware
• Double sided tape for receiver
• Instruction manual
NOTE: Before you install a camera, carefully plan where and how it
will be positioned, and where you will route the cable that connects the
camera to the power adaptor. Before starting permanent installation,
verify its performance by observing the image on a monitor when the
camera is positioned where it will be permanently installed.
B. Installing the receiver
Attach the included
1
antenna to the receiver
by screwing it on.
OPTIONAL
Take the double
sided tape supplied
2
to securely attach
the receiver to a flat
surface.
View your Camera on any Observation Monitor/DVR with BNC
3
inputs or TV with RCA inputs.**
1. Obseration monitor
or DVR with BNC:
Attach the included RCA/BNC
adapter to RCA cable and plug
into observation monitor or DVR.
Connect the audio end of the
RCA cable to the audio input of
the observation monitor or DVR.
2. TV with RCA Inputs:
Connect the RCA video and
audio ends of the RCA audio/
video cable to the video and
audio inputs on your TV.
NOTE: Avoid installing in a location which
requires the wireless signal to pass through
cement, concrete and metal structures. This will
reduce the transmission range.
Audio
1
Video
2
Connect power adaptor to local
120V AC power outlet
NOTE: Wireless camera requires a power
source to operate.
Connect one end of the receiver
4
power adapter to the receiver
and the other end to an
electrical outlet.
ATTENTION: Make sure to first connect
and power on the camera before powering
on the receiver; this will ensure a proper
connection.
www.lorextechnology.com
LW2220 Series QSG_EN_R1 Page 1
WIRELESS DIGITAL SECURITY CAMERA
LW2220 SERIES
QUICK START GUIDE
Multi Digital Wireless Camera Installation
When installing multiple
digital wireless security
cameras in the same
environment maintain as
much space as possible
between the receivers
to optimize camera
performance.
NOTE: It is not recommended to install more than 4 digital wireless security cameras
in the same environment to maintain optimal video frame rate performance.
Need to extend the wireless range?
See product manual for further details.
DVR
REGISTER NOW!
TO RECEIVE 3 MONTHS
WARRANTY EXTENSION
www.lorextechnology.com/warranty
It’s all on the Web
For detailed setup information, please refer to your
User’s Manual. For additional information and
accessory purchases, please visit our website
www.lorextechnology.com/support
www.lorextechnology.com
As our product is subject to continuous improvement, Lorex Technology & subsidiaries
reserve the right to modify product design, specifications, prices & warranty without
©2012 Lorex Technology Inc.
notice and without incurring any obligation. E&OE
LW2220 Series QSG_EN_R1 Page 2
Loading...