Lorex LW2100AC1 Quick Start Manual
FOR MORE INFORMATION:
www.lorextechnology.com
LW2100AC1 QSG_EN_R1 Page 1
CONTENTS:
Quick Start Guide
Digital Wireless Color
Camera with Antenna
Power Adaptor
for camera*
• Aim camera to best optimize the viewing
area: select a location that provides a clear view
of the area you want to monitor, which is free
from dust, and is not directly exposed to a strong
light source or direct sunlight.
• It’s always preferred to install the camera in a
sheltered location whenever possible.
• Avoid installing camera wherever there are thick
walls, obstructions, or interference
(i.e. transformers, microwave ovens or other
electrical equipment) between camera(s) and
receiver.
• Select a location for the camera that has an
ambient temperature between 14°F~122°F
(-10°C~50°C).
• Before starting permanent installation, have
another person hold the camera for you while
you verify its performance by observing the
image on a monitor.
INSTALLING THE CAMERA
Before you install the camera, carefully plan where and how it will
be positioned, and where you will route the cable that connects the
camera to the power adaptor.
INSTALLATION WARNINGS
1. Carefully unpack the camera.
2. Mount the stand to the wall:
• Mark the position of the
screw holes on the wall.
• Drill holes and insert the
drywall plugs as needed.
• Firmly attach the stand
to the wall using the
provided screws.
3. Attach the camera to the
mounting stand. Adjust
the angle of the camera
until the desired view
is set. Tighten the
thumbscrews to secure
the desired camera
position.
*May not be exactly as shown
NOTE: AVOID INSTALLING IN A
LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.
Mounting
Screws
COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
ACCESSORY CAMERA
LW2100AC1 - QUICK START GUIDE
Camera Mounting
Stand
Thumbscrews
FOR MORE INFORMATION:
www.lorextechnology.com
LW2100AC1 QSG_EN_R1 Page 2
1. Connect the power cable from the camera to the power
adapter; plug the power adapter into an outlet or surge
protector.
2. Press the CHANNEL button on the receiver to select an
empty channel.
3. Press and hold the CHANNEL button for 5 seconds to
activate pairing function. The on-screen display informs
you that you have 30 seconds to press the PAIR button on
the camera*.
4. Press and hold the PAIR button underneath the antenna
on the back of the camera. You must press the PAIR
button on the camera within 30 seconds of pressing the
PAIR button on the receiver. If pairing is successful, live
video from the camera will immediately appear on the
monitor.
Attention: * The instructions contained in this Quick Start Guide are
for pairing with the LW2100 receiver. To add this accessory camera to
a different Lorex Digital Wireless Receiver, first, check the”Wireless
Accessory Camera Compatibility Chart” available in the “Manuals and
FAQ’s” section of the LW2100 product page on www.lorextechnology.com
to ensure compatibility. Next, check manual for appropriate receiver for
detailed pairing instructions.
Connecting Camera Power Adapter
Connect one end of the camera power adapter to the camera and the other end to an electrical outlet.
It’s all on the Web
For detailed setup information, please
refer to your User’s Manual. For additional
information, please visit our website
www.lorextechnology.com/support
Pairing Button
Adding the Accessory Camera to your System
The pairing function assigns each camera to a different
channel on the receiver (connect up to 4 cameras to an
LW2100 receiver), and is necessary for configuring
additional cameras. By default the camera that came
with the LW2100 system is assigned to channel no. 1 on
the receiver.
NOTE: It’s highly recommended to pair the accessory
camera to the receiver before permanently mounting the
camera. For detailed information, please check the
owners manual for the LW2100 system which is available
for download at www.lorextechnology.com
Connect power adaptor to
local 120V AC power outlet
COLOR DIGITAL WIRELESS INDOOR/OUTDOOR
ACCESSORY CAMERA
LW2100AC1 - QUICK START GUIDE
Loading...