Page 1
Resources
2.5” / 64mm
3.9”
99mm
0.7lbs / 0.3kg
Weight
• 4K Mini Fixed Eyeball Dome Camera
• Mounting Kit*
• BNC / Power Extension Cable*
• Power Adapter**
* Per camera in multi-camera packs.
** A multi-camera power adapter that provides power to multiple
cameras or individual power adapters may be provided depending on
product configuration.
Package Contents
ATTENTION:
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with
this camera (included). Only the included power adapter can be used. Use of
a non-regulated, non-conforming power supply can damage this product and
voids the warranty.
Connecting the Cameras
Changing the DVR to 4K Resolution
The output resolution of a Lorex HD DVR is set to 1080p as a default. To view 4K
resolution on a 4K monitor, the output resolution must be changed using the DVR
menu.
To change the output resolution through a Lorex HD DVR:
1. Right-click on the Live View to access the Quick Menu.
2. Click Main Menu and then click the Setting icon (
).
3. Click Setting > Display.
4. Click the Display tab.
5. In the Resolution drop-down menu, select 3840 x 2160.
6. Click Apply to save and click OK to exit.
LEV8532B_QSG_EN_R1
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels
noted in the camera’s specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of
intense light.
• Use only the supplied regulated power supply provided with the
product. Use of a non-regulated, non-conforming power supply can
damage the product and void the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use
any harsh, chemical-based cleaners.
• The supplied cable is rated for surface mounting only. Cables for in-wall
and floor-to-floor installations are sold separately (CMR type). These
and other cables are available at lorextechnology.com
• Point the camera where there is the least amount of obstructions
(i.e., tree branches).
• Install the camera where vandals cannot easily reach.
• Secure cabling so that it is not exposed or easily cut.
• This camera is rated for outdoor use. Installation in a sheltered
location is recommended.
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves
the right to modify product design, specifications and prices, without
notice and without incurring any obligation. E&OE. All rights reserved.
• For a full list of compatible recorders, visit
lorextechnology.com/compatibility
• Not intended for submersion in water. Installation in a sheltered
location recommended.
Quick Start Guide
English Version 1.0
Safety Precautions
Installation Tips
Dimensions
Disclaimers
Need Help?
Visit us online for up-to-date software and
complete instruction manuals
Click on the Downloads tab
4
Visit lorextechnology.com
Search for the model number
of your product
Click on your product in the
search results
3
2
1
www.lorextechnology.com
4K Mini Fixed Eyeball
Dome Camera
LEV8532 Series
Page 2
ATTENTION:
Test the camera prior to selecting a permanent mounting location by temporarily
connecting the camera(s) and cables to the DVR.
1. Use the included Allen key to loosen the adjustment screw on
the dome cover.
2. Rotate the camera base counter-clockwise to separate it
from the ball camera and dome cover.
3. Use the included mounting template to mark and drill holes
for the included mounting screws.
4. Feed the camera cable through the camera base.
5. Connect the video and power cable as detailed in the section
‘Setting up the Camera’.
6. Attach the camera base to the mounting surface using the
included screws.
7. Position the dome cover over the ball camera and twist
clockwise onto the camera base. Do not tighten completely.
8. Move the ball camera to the desired position. While holding
the ball camera in place, twist the dome cover the rest of
the way to secure it to the camera base. Holding the camera
prevents it from moving while tightening the dome cover.
9. Use the included Allen key to tighten the adjustment screw
on the dome cover.
NOTE: Insert the included drywall anchors if installing
into drywall.
Mounting
surface
Mounting
screws (×4)
Drywall
anchors (×4)
Camera
base
Ball
camera
Dome
cover
To install the camera:
Adjustment
screw
Mounting
template
Installing the Camera
Connecting the Cameras
Individual Power Adapter* Multi-Camera Power Adapter*
Connecting the Cameras
* Only the included power adapter can be used. Images for representation only.
Connect the male power head
and the BNC connector to the
camera.
Connect the BNC connector
to a video input on your DVR.
Connecting the Camera
Power Adapter Types
A multi-camera power adapter that provides power to multiple cameras
or individual power adapters may be provided, depending on product
configuration.
Connect the female power
head to the included power
adapter.
Camera
DVR
Male Power Female Power
Setup Diagram
BNC Video
12V DC Power
Camera
Extension Cable
Power Adapter
HD DVR
This camera can only be used with 4K rated extension
cables. For details, see ‘Cable Extension Options’.
No picture / signal • Only use the approved power supply and 4K
extension cables provided with camera.
• Ensure that you have set the DVR to 4K output
resolution. See ‘Changing DVR to 4K Resolution’
for details.
• The cameras are only compatible with certain
Lorex HD DVRs. For the full list of compatible
recorders, visit
lorextechnology.com/compatibility
• Ensure your TV or monitor is on the correct
input channel. Common terms for input
channels: INPUT, AV CHANNEL, LINE1, LINE2,
AUX.
• Ensure your DVR is properly connected to your
TV or monitor.
• Ensure connections are properly connected.
• Ensure the camera power supply is plugged in.
• Ensure that you only use the included power
cable.
Picture is too bright • Ensure your camera isn’t pointed directly at a
source of light (e.g., sun or spot light).
• Check the brightness settings of the DVR and
monitor.
• Move your camera to a different location.
Picture is too dark • Check the brightness and contrast settings of
the DVR and monitor.
Night vision is not working • Only use the approved power supply and 4K
extension cables provided with camera.
• The night vision activates when light levels
drop. The area may have too much light.
Picture is not clear • Only use the approved power supply and 4K
extension cables provided with camera.
• Check the camera lens for dirt, dust,
spiderwebs. Clean the lens with a soft, clean
cloth.
• Make sure that the cable run is within the
limitations specified in the section ‘Cable
Extension Options’.
Bright spot in video when
viewing camera at night
• Night vision reflects when pointing a camera
through a window. Move the camera to a
different location.
Troubleshooting
Extend the cable run for your camera depending on the cable type used. Additional
extension cables sold separately. See table below:
Cable Extension Options
Option Model Number Cable Length
1
CB120URB
120ft (37m)
2
CB250URB
250ft (76m)
Notes:
1. The extension cable must be a single stretch of cable between the DVR and
camera. You cannot connect multiple extension cables to each other.
2. Indicators that your cable run may be too long:
• Camera loses video when switching to night vision
• Video is permanently black & white (even during day time)
• Video is unclear, soft, or distorted
3. For more information on extension cables, visit lorextechnology.com
Before Installing the Camera
• Decide whether to run the cables through the
wall / ceiling (drilling required) or along the wall
/ ceiling.
• If you run the cables along the wall / ceiling, you
must run the cable through the cable notch on
the base. This will keep the camera base flush to
the surface when mounted.
Cable Notch
LEV8532B_QSG_EN_R1
Loading...