Lopi PEWTER 98500340, PEWTER 9850034 User Manual

21 DV Wilmington Face

Pewter 98500340 Black 98500341

Compatibility:

• 21DV Fireplace

Packing List:

• Face

Aromatherapy Option

This face is compatible with the aromatherapy tray (SKU 98500385). If using this option, make the necessary
modifications to the face prior to installing the face (see page 2 of this instruction sheet for details).

Installation

! Make sure the fireplace is cool while installing the face.

b

Lift and rotate the face forward
until the top brackets lock into the
upper slots.

36-3/4”

PLATED SURFACES:

Make sure the plated surfaces are clean before starting
the fireplace. Any marks left on plated surfaces may
become etched in place. Clean plated surfaces with
denatured alcohol and a soft cloth.

22-1/8”

The bottom of the face is 1-1/4” below the
base of the fireplace when installed.

Plated Surfaces

Use denatured alcohol and a soft cloth to clean plated surfaces. Marks
left on the surface may damage the face.

a

Tilt the face back
and insert the
bottom brackets
into the lower
slots until they
lock in place.

Soft Cloth

Denatured

Alcohol

Page 1 of 3 8/19/05 © Travis Industries, Inc.

21 DV Wilmington Face

Pewter 98500340 Black 98500341

Aromatherapy Details

The instructions below detail preparation of the aromatherapy tray and the installation of the keystone. Refer to
the aromatherapy kit for details on installing the extension assembly and use of the kit.

1 Remove the keystone and discard the retainer plate following the directions below.

Remove and

Aromatherapy Tray

Plate

discard this plate.

Keystone

2 Attach the aromatherapy tray to the keystone following the directions below.

Aromatherapy Tray

Keystone

NOTE: Hand-tighten these nuts.
Over-tightening may create dimples in
the keystone.

3 Attach the extension assembly to the fireplace following the directions included with the aromatherapy kit.

Page 2 of 3 8/19/05 © Travis Industries, Inc.