Look 765 2020, 765 DISC 2020 User Manual

MA NUAL
765 - 765 DISC
EN
CONGRATULATIONS ! IMPORTANT INFORMATION INTRODUCTION TO THE PRODUCT PRE-ASSEMBLY CHECK FULL ROUTING OF THE 765
Hydraulic assembly
Headset BOTTOM BRACKET FORK BRAKE HYDRATION FITTING THE WHEELS MAINTENANCE AFTER SALES SERVICE GUARANTEE
> 4 > 4 > 5 > 5 > 5
> 5 > 5 > 6 > 8 > 9 > 10 > 10
> 11 > 12 > 13 > 18 > 19 > 19 > 19 > 19 > 20
EN
CONGRATULATIONS !
You've chosen the LOOK 765.
Thank you for putting your trust in our products. By choosing this new LOOK kit, you get the advantages of a high tech, French designed product.
Your frame and its LOOK peripherals, which are identical to those provided to the big professional teams, are checked throughout their manufacture and will give you complete satisfaction.
Our products meet and, indeed, exceed the various current European and international standards.
LOOK products are protected by industrial property rights For more information, please go to www.lookcycle.com/patents
Registering your new LOOK bike
Before rst use, read the whole of the instructions. Follow all the advice given to take full advantage of this high quality product. For the assembly we recommend you go to an approved LOOK dealer. LOOK reserves the right to change the product specications with no prior notice in order to improve it.
The registration of your LOOK bike will make you one of our preferred customers and also gives you the lifetime guarantee on your frame and fork as well as other services.
For more information on the terms, special offers and coverage of the online registration, please visit our website www.lookcycle.com LOOK WARRANTY POLICY section > ONLINE PRODUCT REGISTRATION.
IMPORTANT INFORMATION
Warning : The LOOK 765 and 765 DISC
!
products are designed and optimised for use by cyclists weighing no more than 100 kg (220.5 lbs). Road bikes are designed for use only on paved roads where the tires don't leave the ground. Jumping is
not allowed.
Warning : The LOOK 765 and 765 DISC may
!
be clamped in an assembly stand with care.
Warning about Counterfeit Products :
!
The use of counterfeit products is very dangerous and may cause you, and others, to have serious falls, causing serious injury or even death.
4
For further information, please visit www.lookcycle.com LOOK WARRANTY POLICY section > COUNTERFEIT GOODS. For further details on IMPORTANT INFORMA­TION, please visit www.lookcycle.com LOOK WARRANTY POLICY section > IMPORTANT INFORMATION.
If you cannot visit our site, we can provide a printed copy of our warranty policies through your dealer.
INTRODUCTION TO THE PRODUCT FULL ROUTING OF THE 765
Your 765 or 765 DISC set has been designed and developed following the LOOK design office specications to provide a comfortable riding position thanks to its Endurance geometry as well as a structure made of carbon bre mixed with natural ax bres to better lter out the vibrations on long trips.
This result is achieved by using a "sandwich" structure to allow the Flax Fibres to work between two layers of carbon bre. This is done to optimise the performance and the ltering out of vibrations.
PRE-ASSEMBLY CHECK
Your frame is now delivered with :
• its fork and headset.
• the routing of the derailleur liners for the mounting of a mechanical groupset.
• the aluminium version of its collar (6 Nm max).
• The LOOK pouch with the optional ttings (end caps).
Note : Your 765 frame is routed for a mechanical assembly (black liner under the bottom bracket).
Rear derailleur hanger :
When tting the rear hanger, tighten the screws to a torque of 1 Nm. When removing and retting, put a drop of medium threadlock (LOCTITE 243™ type on each screw.
Mechanical/electronic routing conguration :
The 765 is tted with end caps which allow either electronic or mechanical groupsets to be used. Consult your LOOK dealer for the list of compatible groupsets.
Note : The 765 is compatible with the Campagnolo EPS V2 groupset, to t this groupset please refer to the manufacturer's recommendations.
EN
5
Loading...
+ 10 hidden pages